ページに移動 of 488
CL-Class Operator's Manual ...
Symbols Registered trademarks: R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R DTS is a registered trademark of DTS, Inc. R Dolby and MLP are registered trademarks of DOLBY Laboratories. R BabySmart™, ESP ® and PRE-SAFE ® are registered trademarks of Daimler AG. R HomeLink ® is a registered trademark of Prince. R iPod ® and i ...
Welcome to the world of Mercedes-Benz Before you drive off, please familiarize yourself with your vehicle and read this manual, especially the safety and warning notes. This will help you to obtain the maximum pleasure from your vehicle and avoid endangering yourself and others. The equipment or model designation of your vehicle may differ accordin ...
...
Index ....................................................... 4 Introduction ......................................... 26 At a glance ........................................... 33 Safety ................................................... 43 Opening/closing ................................. 73 Seats, steering wheel and mirrors .... 93 COMAND ..... ...
1, 2, 3 ... 12 V socket see Sockets 4ETS see ETS/4ETS (Electronic Traction System) 4MATIC (permanent four-wheel drive) .................................................. 309 4MATIC off-road system ................... 309 A ABC see Active Body Control (ABC) ABS (Anti-lock Braking System) Display message ............................ 351 Function/note ...
Rear ............................................... 267 Setting ........................................... 266 Setting the center air vents ........... 266 Setting the side air vents ............... 266 Stowage compartment .................. 266 Alarm system see ATA (Anti-Theft Alarm system) Alertness Assistant see ATTENTIO N ASSIS T Alternative ...
B Back button ....................................... 111 Back support see Lumba r support Bag hook ............................................ 395 Balance, adjusting ............................. 126 BAS (Brake Assist System) ................. 66 Basic settings see Set tings BAS PLUS (Brake Assist System PLUS) .................................... ...
Care Carpets .......................................... 425 Car wash ........................................ 419 Display ........................................... 423 Exterior lights ................................ 422 Gear or selector lever .................... 425 Interior ........................................... 423 Matte finish ......... ...
Indicator lamp ................................ 262 Main menu ..................................... 239 Maximum cooling .......................... 264 Notes on using automatic climate control ........................................... 261 Overview of systems ...................... 260 Problems with cooling with air dehumidification ............... ...
MP3 ............................................... 215 MUSIC REGISTER ........................... 216 Date format, setting .......................... 129 Day design, setting ........................... 128 Daytime running lamps Display message ............................ 365 Switching on/off (on-board computer) ................................... ...
Driver's seat see Sea ts Driving abroad Mercedes-Benz Service ................. 419 Symmetrical low beam .................. 248 Driving lamps see Daytime running lamps Driving safety systems ABS (Anti-lock Braking System) ....... 65 ADAPTIVE BRAKE ............................. 69 BAS (Brake Assist System) .............. 66 BAS PLUS (Brake Assi ...
Electronic brake force distribution see EBD (electronic brake force distribution) Electronic Stability Program see ESP ® (Electronic Stability Program) Electronic Traction System see ETS/4ETS (Electronic Traction System) Emergency release Driver's door .................................... 82 Trunk ............................................. ...
Filling capacities (Technical data) ... 478 First-aid kit ......................................... 428 Flat tire Changing a wheel/mounting the spare wheel ................................... 429 MOExtended run-flat system ......... 433 Preparing the vehicle ..................... 429 Raising the vehicle ......................... 430 Floormat ...... ...
HOLD function Display message ............................ 372 Function/notes ............................. 306 Home see Ho me address Home address Entering and saving ....................... 142 Selecting from the destination memory ......................................... 144 Hood Closing ........................................... 413 Display m ...
Driving abroad ............................... 248 Fog lamps ...................................... 250 Hazard warning lamps ................... 251 High beam flasher .......................... 251 High-beam headlamps ................... 251 Light switch ................................... 248 Low-beam headlamps .................... 249 Rear fog la ...
Mechanical key Function/notes ................................ 76 Unlocking the driver's door .............. 82 Media Interface Active partition .............................. 224 Alphabetical track selection .......... 224 Connecting an external audio source ............................................ 220 Connection options ................. ...
Compass function .......................... 174 Destination memory ...................... 164 Displaying destination information (arrival time, distance to destination) ............................... 158 Entering/saving your home address .......................................... 142 Entering a destination .................... 138 Entering a desti ...
Opening height restriction for trunk lid .............................................. 237 Operating safety Diagnostics connection ................... 29 Operating system see On -board com puter Outside lighting Delayed switch-off (COMAND) ....... 235 Outside temperature display ........... 335 Overhead control panel ...................... 40 Over ...
Program selector button .................. 280 Pulling away (automatic transmission) ..................................... 273 PULSE see Massage function (PULSE) Q Qualified specialist workshop ........... 29 R RACETIMER (on-board computer) .... 342 Radar sensor system Activating/deactivating ................. 348 Display message .................. ...
Destination reached ...................... 156 Lane recommendations ................. 153 Off-road ......................................... 159 Traffic reports ................................ 160 Route guidance (navigation) ............ 339 Route guidance (on-board computer) .......................................... 339 Route information see Dyn ...
Setting the language COMAND ....................................... 135 Setting the night design ................... 128 Setting the text reader speed .......... 130 Setting the vehicle level ................... 308 Setting the volume Telephone calls .............................. 125 Video AUX ..................................... 232 Side impact ...
Steering wheel heating .................. 101 Storing settings (memory function) ........................................ 104 Steering wheel heating Switching on/off ........................... 101 Steering wheel paddle shifters ........ 281 Stop function Audio DVD ..................................... 210 Video DVD ................................ ...
Self-test ......................................... 400 System .......................................... 399 Vehicle remote unlocking .............. 405 Telephone Accepting/ending a call ................ 185 Accepting a call ............................. 344 Adjusting the volume for calls ....... 125 Basic menu (Bluetooth ® interface) ........... ...
DOT (Department of Transportation) (definition) ............ 466 GAWR (Gross Axle Weight Rating) (definition) ..................................... 467 GVW (Gross Vehicle Weight) (definition) ..................................... 467 GVWR (Gross Vehicle Weight Rating) (definition) ......................... 467 Important safety notes ............... ...
Trunk Emergency release .......................... 86 Important safety notes .................... 83 Limiting the opening angle ............. 237 Locking separately ........................... 86 Opening/closing (automatically from inside) ...................................... 85 Opening/closing (automatically from outside) ....................... ...
Subtitles ........................................ 231 Switching to ................................... 228 VIN ...................................................... 477 Voice Control System Settings ......................................... 130 Volume, adjusting COMAND ....................................... 125 Navigation messages .............. ...
Product information Mercedes-Benz recommends that you use genuine Mercedes-Benz parts, conversion parts and accessories that have been approved for the type of vehicle. Mercedes-Benz tests genuine parts as well as conversion parts and accessories which have been specifically approved for your vehicle for their reliability, safety and suitability. D ...
Information for customers in California Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if after a reasonable number of repair attempts Mercedes-Benz USA, LLC and/or its authorized repair or service facilities fail to fix one or more substantial defects or malfunctions in t ...
If you bought this vehicle used, be sure to send in the "Notice of Purchase of Used Car" found in the Service and Warranty Information Booklet, or call the Mercedes- Benz Customer Assistance Center (in the USA) at 1-800-FOR-MERCedes(1-800-367-6372) or Customer Service (in Canada) at 1-800-387-0100. Vehicle operation outside the USA and Ca ...
Declarations of conformity Vehicle components which receive and/or transmit radio waves USA: "The wireless devices of this vehicle comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) These devices may not cause harmful interference, and 2) These devices must accept any interference received, including ...
If you remove any warning stickers, you or others could fail to recognize certain dangers and be injured. When driving your vehicle observe the following information: R the safety notes in this manual R the "Technical data" section in this manual R traffic rules and regulations R laws and safety standards pertaining to motor vehicles Prob ...
Your vehicle records electronic data. If your vehicle is equipped with mbrace 1 , data is transmitted in the event of an accident. This information helps, for example, to test vehicle systems after an accident and to continually improve vehicle safety. Daimler AG can access this data and submit it: R for safety research or vehicle diagnosis purpose ...
32 ...
Cockpit ................................................. 34 Instrument cluster .............................. 35 On-board computer and COMAND ..... 37 Center console .................................... 39 Overhead control panel ...................... 40 Door control panel .............................. 41 33 At a glance ...
Cockpit Function Page : Steering wheel paddle shifters 281 ; Combination switch 250 = Cruise control lever 295 ? Horn A Instrument cluster 35 B DIRECT SELECT lever 277 C Control panel for: Vehicle level 307 Suspension tuning 307 PARKTRONIC 310 Swiveling the COMAND display 116 COMAND display brightness 116 Instrument lighting 116 Function Page D Ove ...
Instrument cluster Displays Function Page : Coolant temperature 334 ; Fuel gauge = PARKTRONIC 310 ? Multifunction display 336 Speedometer A Transmission position 278 B Tachometer 335 C Drive program 280 D Parking Guidance 313 Function Page E Unit of measurement for the speedometer 348 F Outside temperature 335 G Additional speedometer 348 H HOLD fu ...
Warning and indicator lamps Function Page : Turn signal 250 ; Electric parking brake (red) 383 F (USA only) ! (Canada only) = Electric parking brake (yellow) 383 F (USA only) ! (Canada only) ? Seat belt 382 A ESP ® 385 B Distance warning 389 Function Page C Brakes 383 $ (USA only) J (Canada only) D ESP ® OFF 385 E Tire pressure monitor 389 F Chec ...
On-board computer and COMAND Function Page : % Back 335 Switches off the Voice Control System; see the separate operating instructions ; =; Selects a menu 335 9: Selects a function or scrolls through lists 335 a Confirms a selection 335 Hides display messages 350 = Multifunction display 336 Function Page ? ~ 344 Rejects or ends a call 344 Exits pho ...
Function Page C COMAND display 113 Function Page D CD and DVD player/ changer 207 E COMAND controller and COMAND function buttons 110, 111 38 On-board computer and COMAND At a glance ...
Center console Function Page : Function button for the radio and CD/DVD/SD card 111 ; Back button 111 = Hazard warning lamps 251 ? Lumbar support 241 Multicontour seat 241 A Function button for the telephone and navigation system 137 B Switches COMAND on/off 124 Function Page C Adjusts the volume 125 D Programmable button 111 E Telephone keypad 112 ...
Overhead control panel Function Page : Eyeglasses compartment 393 ; p Switches the left- hand reading lamp on/off 253 = v Switches the rear interior lighting on/off 254 ? c Switches the front interior lighting on/off 254 A 3 Opens/closes the sliding sunroof 90 B G SOS button (mbrace system) 400 C | Switches the automatic interior lighting control o ...
Door control panel Function Page : Opens the door 81 ; %& Unlocks/locks the vehicle 81 = Adjusts the seat electrically 96 ? r 45= Memory function 104 w Adjusts the front- passenger seat from the driver’s seat 96 A c Seat heating 99 s Seat ventilation 100 B 7 Zª Adjusts and folds the exterior mirrors in/out electrically 102 Function Page C W ...
42 ...
Useful information .............................. 44 Occupant safety .................................. 44 Children in the vehicle ........................ 59 Panic alarm .......................................... 64 Driving safety systems ....................... 65 Theft deterrent locking system ......... 71 43 Safety ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
G WARNING The SRS self-check has detected a malfunction if the 6 SRS indicator lamp: R does not light up at all R does not go out after approximately four seconds after the engine is started R comes on after the engine was started or while driving. For your safety, Mercedes-Benz strongly recommends that you have the system checked as soon as possib ...
R Never place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat. R Improper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians. Contact an authori ...
R do not lean your head or chest close to the steering wheel or dashboard. R only hold the steering wheel on the outside. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury if the driver front air bag inflates. R adjust the front-passenger seat as far back as possible from the dashboard when the se ...
belts regardless of whether your vehicle is equipped with air bags or not. It is important for your safety and that of your passenger to have deployed air bags replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags continue to perform their protective function for the vehicle occupants in the event of a ...
that provided by the seat belt, driver's knee bag = ( Y page 48) is deployed along with the driver's air bag. Driver's knee bag = ( Y page 48) operates best in conjunction with a properly positioned and fastened seat belt. Side impact air bags G WARNING The pressure sensors for side impact air bag control are located in the doors. Do ...
whether the front-passenger seat is occupied or not. Window curtain air bags The window curtain air bags enhance the level of protection for the head, but not chest or arms, of the vehicle occupants on the side of the vehicle on which the impact occurs. The window curtain air bags are integrated into the side of the roof frame and deploy in the are ...
individual is in the front-passenger seat, have the front passenger reposition himself or herself in the seat until the 42 indicator lamp goes out. In the event of a collision, the air bag control unit will not allow front-passenger front air bag deployment when the OCS has classified the front-passenger seat occupant as weighing as much as or less ...
restraint, toddler restraint, or booster seat recommended for the size and weight of the child. Children can be killed or seriously injured by an inflating air bag. Note the following important information when circumstances require you to place a child in the front- passenger seat: R Your vehicle is equipped with air bag technology designed to dea ...
If the SmartKey has been removed from the ignition lock or is in position 0 , 42 indicator lamp : does not light up. G WARNING If the red SRS 6 indicator lamp in the instrument cluster and the 42 indicator lamp are lit at the same time, there is a malfunction in the OCS. The front passenger front air bag will be deactivated in this case. Have the s ...
Problems with the Occupant Classification System Problem Possible causes/consequences and M Solutions The 42 indicator lamp illuminates and remains illuminated. The person on the front-passenger seat: R has the weight of a typical adult R has been determined by the system not to be a child The OCS is malfunctioning. X Have the OCS checked as soon a ...
PRE-SAFE ® (preventative occupant protection) G WARNING The PRE-SAFE ® system reduces the impact of an accident on vehicle occupants, as long as their seat belts have been fastened correctly. Although your vehicle is equipped with a PRE- SAFE ® system, the possibility of injury in the event of an accident cannot be ruled out. You should therefor ...
In the same crash, the possibility of injury or death is lessened if you are properly wearing your seat belt. The air bags can only protect as intended if the occupants are properly wearing their seat belts. G WARNING Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide ...
R Position the lap belt as low as possible on your hips and not across the abdomen. If the lap belt is positioned across your abdomen, it could cause serious injuries in a crash. R Never wear seat belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys etc., as these might cause injuries. R Make sure the seat be ...
X Adjust the seat and move the backrest to an almost vertical position ( Y page 94). X Pull the seat belt smoothly through belt sash guide : . X Without twisting it, guide the shoulder section of the seat belt across the middle of your shoulder and the lap section across your hips. X Engage belt tongue ; in buckle = . X If necessary, pull upwards o ...
Emergency Tensioning Devices, belt force limiters The seat belts are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the body. The ETDs do not correct incorrect seat positions or incorrectly fastened seat belts. The ETDs do not pull vehicle occupants back towards the backre ...
child. The infant or child restraint system must be properly secured in accordance with the manufacturer's instructions. All infant or child restraint systems must comply with U.S. Federal Motor Vehicle Safety Standards 213 and 225 and Canadian Motor Vehicle Safety Standards 213 and 210.2. An information label on the child restraint system ind ...
R If you place a child in a forward-facing child restraint on the front-passenger seat: - move the seat as far back as possible - use the proper child restraint recommended for the age, size and weight of the child - secure child restraint with the vehicle's seat belt according to the child seat manufacturer's instructions R For children ...
retractor ensures the seat belt will not slacken once the child restraint system has been secured. Installing a child restraint system: X Always comply with the manufacturer's installation instructions. X Pull the seat belt smoothly from the inertia reel. X Engage the seat belt tongue in the belt buckle. Activating the special seat belt retrac ...
instructions when installing the LATCH- type (ISOFIX) child restraint system. Top Tether Top Tether provides an additional connection between the child restraint system secured with ISOFIX and the rear seat. It helps reduce the risk of injury even further. The Top Tether anchorage points are located in the rear compartment behind the head restraint ...
If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned on these parts. Override feature fo ...
1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. The product label with FCC ID and IC certification number can be found in the batt ...
G WARNING If the ABS malfunctions, other driving systems such as the BAS or the ESP ® are also switched off. Observe indicator and warning lamps that may come on as well as messages in the multifunction display that may appear. If the ABS malfunctions, the wheels may lock during hard braking, reducing the steering capability and extending the brak ...
automatically increases the braking force to a level suitable for the traffic conditions. R For speeds below 20 mph (30 km/h) : if you apply the brakes, BAS PLUS is activated. Braking is performed as late as possible. If BAS PLUS demands particularly high braking force, preventative passenger protection measures (PRE-SAFE ® ) are activated simulta ...
G WARNING Under no circumstances should you deactivate ESP ® when the ÷ ESP ® warning lamp in the instrument cluster flashes. Proceed as follows: R when driving off, apply as little throttle as possible. R while driving, ease up on the accelerator pedal. R adapt your speed to suit the prevailing road and weather conditions. Failure to observe th ...
It may be best to deactivate ESP ® in the following situations: R when using snow chains R in deep snow R on sand or gravel G WARNING Switch on ESP ® immediately if one of the previously stated conditions is no longer met. Otherwise, ESP ® cannot stabilize the vehicle if it begins to lurch or when a wheel spins. When you deactivate ESP ® : R ES ...
i Observe the "Important safety notes" section ( Y page 65). PRE-SAFE ® Brake can help you to minimize the risk of a frontal collision with a vehicle ahead or reduce the effects of such a collision. If PRE-SAFE ® Brake has detected a risk of collision, you will be warned visually and acoustically as well as by automatic braking. PRE-SAF ...
immediately prior to an accident that can no longer be avoided. G WARNING Even if PRE-SAFE ® Brake slows the vehicle before an imminent rear-end collision, the system cannot avert a collision without the intervention of the driver. There is a risk of an accident. Brake according to the situation or take evasive action. Delayed intervention by the ...
Center or call 1-800-FOR-MERCedes (in USA) or 1-800-387-0100 (in Canada). ATA (anti-theft alarm system) A visual and audible alarm is triggered if the alarm system is armed and you open: R a door R the vehicle with the mechanical key R the trunk lid R the hood The alarm is not switched off, even if you close the open door that has triggered it, for ...
Useful information .............................. 74 SmartKey ............................................. 74 Doors .................................................... 80 Trunk .................................................... 83 Side windows ...................................... 87 Sliding sunroof .................................... 90 73 O ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
: & Locks the vehicle ; F Unlocks the trunk lid = % Unlocks the vehicle When unlocking, the turn signals flash once. When locking, they flash three times. When it is dark, the surround lighting also comes on if it is activated in COMAND ( Y page 236). If you activate the acoustic locking confirmation function you will hear the following, depend ...
X To unlock the vehicle: pull the door handle. X To lock the vehicle: touch sensor surface : . X Convenience closing feature: touch recessed sensor surface ; for an extended period ( Y page 89). If you pull on the handle of the trunk lid, only the trunk of the vehicle is unlocked. If the vehicle has been parked for a long time, the sensor surfaces ...
Removing the mechanical key X Push release catch : in the direction of the arrow and at the same time, remove mechanical key ; from the SmartKey. SmartKey battery Important safety notes Have the batteries changed at a qualified specialist workshop. G WARNING Batteries contain toxic substances. Swallowing batteries can lead to serious health issues ...
arrow until battery tray cover : opens. When doing so, do not hold cover : shut. X Remove battery tray cover : . X Repeatedly tap the SmartKey against your palm until battery = falls out. X Insert the new battery with the positive terminal facing upwards. Use a lint-free cloth to do so. X Make sure that the surface of the battery is free from lint, ...
Problems with the SmartKey Problem Possible causes/consequences and M Solutions You cannot lock or unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged. X Try again to lock/unlock the vehicle using the remote control function of the SmartKey. Point the tip of the SmartKey at the driver's door handle fr ...
Problem Possible causes/consequences and M Solutions You have lost the mechanical key. X Report the loss immediately to the vehicle insurers. X If necessary, have the locks changed as well. The engine cannot be started using the SmartKey. The on-board voltage is too low. X Remove the SmartKey and reinsert it into the ignition lock. X Start the engi ...
G WARNING Do not carry heavy or hard objects in the passenger compartment unless they are firmly secured in place. Unsecured or improperly positioned cargo increases a child's risk of injury in the event of: R strong braking maneuvers R sudden changes of direction R an accident Unlocking and opening doors from the inside You can open a door fr ...
Automatic locking feature When the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h), the vehicle locks automatically. You could therefore be locked out when: R the vehicle is being pushed. R the vehicle is being towed. R the vehicle is being tested on a dynamometer. You can switch off the aut ...
Locking the vehicle If the vehicle can no longer be locked with the SmartKey, you can lock it by taking the following steps. If the central locking in the vehicle is malfunctioning, you cannot lock the trunk. X Open the front-passenger door. X Close the driver's door and the trunk lid. X Press down the locking knob of the driver's door in ...
The trunk lid can be: R opened and closed manually from outside R opened and closed automatically from outside R opened and closed automatically from inside R locked separately R unlocked with the mechanical key R opened with the emergency release button Opening and closing manually Opening X Press the % button on the SmartKey. X Pull handle : . X ...
Closing G WARNING Monitor the closing procedure carefully to make sure no one is in danger of being injured. To prevent possible personal injury, always keep hands and fingers away from the trunk opening when closing the trunk lid. Be especially careful when small children are around. To stop the closing procedure, do one of the following: R Press ...
X To open: press remote operating switch for trunk lid : until the trunk lid opens. X To close: press remote operating switch for trunk lid : until the trunk lid is closed. Locking the trunk separately You can lock the trunk separately. If you then unlock the vehicle centrally, the trunk remains locked and cannot be opened. X Close the trunk lid. X ...
X Briefly press emergency release button : . The trunk lid unlocks and opens. The trunk lid can be unlocked and opened with the trunk lid emergency release when the vehicle is stationary or while driving. Trunk lid emergency release light: R emergency release button : flashes for 30 minutes after the trunk lid is opened R emergency release button : ...
The switches on the driver's door take precedence. i The side windows cannot be operated from the rear when the override feature for the side windows is activated ( Y page 64). X Turn the SmartKey to position 1 or 2 in the ignition lock. X To open: press the corresponding switch. X To close: pull the corresponding switch. i You can start autom ...
Using KEYLESS-GO The KEYLESS-GO key must be outside the vehicle. All the doors must be closed. X Touch recessed sensor surface : on the door handle until the side windows and the sliding sunroof are fully closed. i Make sure you only touch recessed sensor surface : . X Make sure that all the side windows and the sliding sunroof are closed. X To int ...
G WARNING Pulling and holding the switch to close the window immediately after it had been blocked two times will cause the window to close without the anti-entrapment feature for as long as you hold the switch. Sliding sunroof Important safety notes G WARNING When opening or closing the sliding sunroof, make sure that there is no danger of anyone ...
X Turn the SmartKey to position 1 or 2 in the ignition lock. X Press or pull the 3 switch in the corresponding direction. i If you press the 3 switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again. The automatic raising f ...
92 ...
Useful information .............................. 94 Correcting the driver's seat posi- tion ....................................................... 94 Seats .................................................... 95 Steering wheel .................................. 100 Mirrors ............................................... 102 Memory function . ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
Seats Important safety notes G WARNING In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done before setting the vehicle in motion. G WARNING Do not adjust the driver's seat while driving. Adjusting the seat while driving co ...
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. ! To avoid damage to the seats and the seat heating, observe the following information: R keep liquids from spilling on the seats. If liquid is spilled on the seats, dry them as soon as possible. R if the seat covers a ...
Make sure no one is caught or injured while the seat is being adjusted. Even with the SmartKey or SmartKey with KEYLESS-GO removed from the starter switch or the SmartKey with KEYLESS-GO removed from the vehicle, the power seats can be operated. Therefore, do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A chi ...
Folding back the rear seat head restraints from the front X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X Press button : . Folding the rear seat head restraints into position pneumatically X Press and hold button : until the head restraints are folded up. i If a rear-seat passenger inserts the seat belt into the buckle, ...
Folding the backrest forwards In order to make it convenient for passengers to get in and out of the rear compartment, the driver's or front-passenger seat: R is automatically moved forwards when the backrest is folded forwards R is automatically moved backwards when the backrest is folded back X Pull seat release handle : in the direction of ...
The system automatically switches off approximately 20 minutes after it is set to level 1 . X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X To switch on: press button : repeatedly until the desired heating level is set. X To switch off: press button : repeatedly until all the indicator lamps go out. Problems with the sea ...
Adjusting the steering wheel : To adjust the steering wheel position (fore-and-aft adjustment) ; To adjust the steering wheel height i Other topics: R EASY-ENTRY/EXIT feature ( Y page 101) R storing settings ( Y page 104) R operating the on-board computer ( Y page 335) Steering wheel heating Switching on/off The steering-wheel heating heats the lea ...
be completed before setting the vehicle in motion. Driving off with the steering wheel still adjusting could cause the driver to lose control of the vehicle. ! Do not activate the EASY-ENTRY/EXIT feature, if the seat backrest is reclined too far backwards. This can damage the front or rear seats. You must first move the backrest to a vertical posit ...
should have a good overview of traffic conditions. Folding the exterior mirrors in or out electrically X Make sure that the SmartKey is in position 1 or 2 in the ignition lock. X Briefly press button : . Both exterior mirrors fold in or out. i Make sure that the exterior mirrors are always folded out fully while driving. They could otherwise vibrat ...
X Make sure that the vehicle is stationary and that the SmartKey is in position 2 in the ignition lock. X Press button = for the exterior mirror on the front-passenger side. X Engage reverse gear. The exterior mirror on the front-passenger side moves to the preset parking position. X Use adjustment button ; to adjust the exterior mirror. You should ...
R driver's side: steering wheel position R driver's side: position of the exterior mirrors on the driver's and front-passenger sides X Adjust the seat ( Y page 96). X On the driver's side, adjust the steering wheel ( Y page 101) and the exterior mirrors ( Y page 102). X Briefly press the M memory button and then press storage po ...
106 ...
Useful information ............................ 108 Introduction ...................................... 108 At a glance ......................................... 110 System settings ................................ 128 Navigation ......................................... 136 Telephone .......................................... 179 Audio ........... ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
harmful interference, and 2) These devices must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Canada only: The wireless devices of this vehicle comply with ...
At a glance COMAND operating system Overview Function Page : COMAND display 114 ; COMAND controller and function buttons 110 = Telephone keypad 112 Components of COMAND COMAND consists of: R the COMAND display/SPLITVIEW R the DVD changer R the COMAND controller R the COMAND function buttons R the telephone keypad R connections in the glove box (USB ...
The COMAND controller can be: R pressed briefly or pressed and held W R turned clockwise or counter-clockwise cVd R slid left or right XVY R slid forwards or back ZV Æ R slid diagonally aVb In the instructions, operating sequences are described as follows: X Press the R button. Audio mode is activated. X Select Audio by sliding V Æ and turning cV ...
You can assign the following predefined functions to the h programmable button: R ECO : you can activate or deactivate the ECO start/stop function. R Massage, Driver's Seat : you can switch the massage function for the driver's seat on and off. R Massage, Front Passenger's Seat : you can switch the massage function for the front-pass ...
COMAND display Display overview The COMAND display shows the function currently selected and its associated menus. The COMAND display is divided into several areas. The radio display is shown in the example. : Status bar ; To call up the audio menu = Main function bar ? Display/selection window A Radio menu bar B Air-conditioning function bar Statu ...
Navi Audio Telephone Video Vehicle Mode FM/AM radio Video DVD ECO Map orientation Sat radio AUX Multicontour seat/lumbar settings Point of interest symbols on the map Disc Video off Rear window blind Traffic symbols on the map Memory card EASY-ENTRY/ EXIT system Text information on map MUSIC REGISTER Exterior lighting delayed switch-off O Topograph ...
For example, the "Navi" function can be used from the driver's side while the "Video" function is used on the front-passenger side. Use the remote control to operate COMAND from the front-passenger side with SPLITVIEW. Please bear the following in mind R Your vehicle may be equipped with SPLITVIEW, depending on its date of ...
switch SPLITVIEW on and off ( Y page 117). The SPLITVIEW screen remains on for approximately 30 minutes after the SmartKey has been turned to position 0 in the ignition lock. After this time or after the SmartKey has been removed, the settings on the front- passenger side are saved for approximately 30 minutes longer. After this period, reactivatio ...
Avoid using alcoholic thinners, gasoline or abrasive cleaning agents. These could damage the display surface. Do not apply pressure to the display surface when cleaning it, as this could cause irreversible damage. Remote control Overview You can use the remote control to operate the COMAND display and SPLITVIEW. : To switch the screen on/off (SPLIT ...
Functions with the E and F button You can use the remote control to execute the same functions as the COMAND control panel. Mode Function Audio mode Selects a station using the station search function ( Y page 198) Selects a track by skipping to a track ( Y page 211) Fast forward/rewind ( Y page 212) Video mode Selects a scene or chapter (video DVD ...
Calling up the menu of a main function : To call up the audio menu ; Main function bar If one of the main functions navigation, audio, telephone or video is switched on, triangle : appears next to the entry. You can now select an associated menu. The following example illustrates how to call up the audio menu. X Press the R function button. or X Se ...
Calling up the audio function X Select Audio in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. The basic display of the current audio operating mode, e.g. audio CD, appears. Switching to radio mode Option 1 X Press the R function button. The radio display appears. i Repeated pressing of this functi ...
You can enter the characters using either the character bar or the number keypad. In the selection list, you select an entry to copy it to the address entry menu. Option 1: city list with character bar X Call up the city list with character bar ( Y page 138). The alphabetically sorted city list shows the first available entries. Entering characters ...
You see which characters you can enter with that key. Each time the key is pressed, the next character is selected. Example: key p : R press once = M R press twice = N R press three times = O X Wait until the character display goes out. The entries matching your input are shown in the list. X Enter E , W , space, Y with the corresponding keys. i Th ...
i You will find further information in the "Destination entry" section ( Y page 138). Entering characters in the address and the phone book Introduction The following section describes how to enter characters in the phone book/address book when creating a new entry. Creating a new entry in the phone book X Call up the input menu with data ...
Option 1 X Select 4 or 5 in the character bar and press W to confirm. The input menu shows the data field selected. : Cursor in the next data field ; To store an entry = 4 and 5 icons to select a data field Option 2 X Slide ZV the COMAND controller repeatedly until the character bar disappears. X Select the data field by sliding ZV Æ and press W t ...
Switching the sound on or off Switching audio and video sources on/off X Press the 8 button on the multifunction steering wheel. The sound from the respective audio or video source is switched on or off. i When the sound is off, the system displays the , symbol in the status line. When you change the audio or video source, or adjust the volume, sou ...
Adjusting the sound settings Calling up the sound menu You can make various sound settings for the different audio and video sources. This means that it is possible to set more bass for radio mode than for audio CD mode, for example. You can call up the respective sound menu from the menu of the desired mode. The example describes how to call up th ...
Surround sound General information If your vehicle is equipped with the harman/ kardon ® Logic 7 ® surround sound system, you can provide the optimum sound experience for every passenger. The harman/kardon ® Logic7 ® surround sound system is available for the following operating modes: R radio (FM only) R satellite radio R audio CD R audio DVD ...
: Current setting X Select the Logic7 ® ON or Logic7 ® OFF setting by turning cVd the COMAND controller and press W to confirm. Depending on your selection, surround sound is switched on or off and the menu is exited. X To exit the menu without saving: press the % back button or slide XVY the COMAND controller. i Please bear the following in mind ...
Design Explanation Day Mode The display is set permanently to day design. Night Mode The display is set permanently to night design. Automatic The display design changes depending on the brightness around the vehicle. i In the Automatic setting, COMAND evaluates the readings from the automatic vehicle light sensor and switches between the display d ...
Abbreviation Meaning DD / MM / YYYY Day/Month/Year (date format) HH / MM Hours/Minutes (time format) You can set the 24-hour or the AM/PM format. X Set the format by turning cVd the COMAND controller and press W to confirm. Setting the time zone and switching between summer and standard time X Select Vehicle in the main function bar by turning cVd ...
Individualization Introduction You can use the individualization function to fine tune the Voice Control System to your voice and therefore improve voice recognition. This means that other users' voices will not be recognized as easily. For this reason this function can be switched off. Individualization comprises two parts and takes approxima ...
Canceling the first or second part of individualization X Confirm Cancel by pressing W the COMAND controller. A prompt appears asking whether you really wish to cancel. X Select Yes or No and press W to confirm. If you select Yes , individualization will be canceled. The data from the part during which you exited is not stored. If you select No , t ...
Activating/deactivating Bluetooth ® X Select Vehicle in the main function bar by turning cVd the COMAND controller and press W to confirm. X Select System by turning cVd the COMAND controller and press W to confirm. X Select Bluetooth by turning cVd the COMAND controller and press W to confirm. X Select Bluetooth activated and press W to confirm. ...
X Select Options by sliding VY the COMAND controller and press W to confirm. X Select Authorize and press W to confirm. or X Press W to confirm the selected device. The input menu for the passcode appears. The passcode is any one to sixteen-digit number combination which you can choose yourself. You must enter the same number combination in COMAND ...
X Select Details and press W to confirm. The detailed display for this device appears. X To close the detailed view: turn cVd or slide XVY the COMAND controller. De-authorizing (de-registering) a Bluetooth ® device Mercedes-Benz USA, LLC recommends de- authorization in both COMAND and the Bluetooth ® device, e.g. the mobile phone. Subsequent auth ...
Navigation Introduction Safety notes G WARNING For safety reasons, only enter a destination when the vehicle is stationary. When the vehicle is in motion, a passenger should enter the destination. Study manual and select route before driving. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of ...
Switching to navigation mode X Press the S function button once or twice. or X Select Navi in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. In both cases, you will see the map either with or without the menu shown. Map showing the menu; route guidance inactive : Current vehicle position Map withou ...
You can select the following route options: R Use Carpool Lanes R Minimize highways R Minimize Toll Roads R Minimize Tunnels R Minimize Ferries R Minimize Motorail Trains If you select route options with a tick, the corresponding types of roads will be avoided in the route guidance where possible. X To activate navigation mode: press the S function ...
Entering a destination by address Introduction When entering an address as the destination, you have the following options: R entering the state/province, city/ZIP code and street R entering the state/province, city/zip code and center R entering the state/province, city/zip code, street and house number R entering the state/province, city/zip code ...
R Last States/Provinces R States (U.S.) R Provinces (Canada) X To select a list : turn cVd the COMAND controller and press W to confirm. The list of selected states/provinces appears. X To select a state/province: turn cVd the COMAND controller and press W to confirm. The address entry menu appears again. The state/province selected has now been en ...
Street list X Select a street by turning cVd the COMAND controller and press W to confirm. X Irrespective of the option, press W to confirm your selection. The address entry menu appears again. The street has now been entered. Entering the house number It is not possible to enter a house number until a street has been entered. X Select No. in the a ...
X In the address entry menu, confirm Start by pressing W . If no other route has been calculated, route calculation starts immediately (Option 1). If another route has already been calculated (route guidance is active), a prompt appears (option 2). Option 1 – no route guidance active: route calculation starts. While route calculation is in progre ...
: Digits entered by the user ; Digits automatically added by the system = List entry most closely resembling the characters entered so far ? To switch to the list without the character bar A To delete the entire entry: press and hold; to delete the last character: press briefly B Available characters C Selected character D Unavailable characters E ...
Entering an intersection name Entering an intersection will delete a previously entered house number. X Select Intersection (intersection) in the address entry menu by turning cVd and sliding ZV Æ the COMAND controller and press W to confirm. You will see the intersection list either with the character bar (option 1) or as a selection list (option ...
X To show the menu: press W the COMAND controller. X Select Destination in the navigation system menu bar by turning cVd the COMAND controller and pressing W to confirm. X Select From Last Destinations and press W to confirm. "Last destinations" list : Last destination X Select the desired destination by turning cVd the COMAND controller ...
switched on and the GPS signal is strong enough. Moving the map and selecting the destination X To scroll the map: slide XVY , ZV Æ or aVb the COMAND controller. X To set the map scale: as soon as you turn cVd the COMAND controller, the scale bar appears. X Turn cVd until the desired scale is set. Turning clockwise zooms out from the map; turning ...
X To select a category: select a category by turning cVd the COMAND controller and pressing W to confirm. COMAND first searches in the selected category for destinations along the route. If there are no destinations available there, COMAND searches for destinations within a radius of up to 100 km of the vehicle position. If COMAND finds destination ...
X Select Delete Stopover and press W to confirm. COMAND deletes the intermediate stop and recalculates the route to the main destination. Entering a point of interest Initiating point of interest entry X To activate navigation mode: press the S function button once or twice. X To show the menu: press W the COMAND controller. X Select Destination in ...
X Enter the phone number using the character bar. Assigning a point of interest category Introduction The categories and points of interest available depend on the distance from the vehicle position you have set for the point of interest. R point of interest in the vicinity of the destination: Alphabetically sorted categories, as well as points of ...
Example display : Point of interest category ; Direction display to point of interest starting from the current position = Linear distance to the point of interest ? Point of interest A Selected category or sub-category i Depending on the point of interest selected, COMAND uses different reference points in determining the linear distance to the de ...
X Select the entry with the Z icon by turning cVd the COMAND controller and press W to confirm. The ZAGAT evaluations appear. 1 ZAGAT ratings 2 To display details X To show a description: select Details and press W to confirm. ZAGAT example description Selecting a point of interest using the map You can select points of interest that are available ...
Route guidance General notes G WARNING COMAND calculates the route to the destination without taking into account the following, for example: R Traffic lights R Stop and right-of-way signs R Lane merging R Parking or stopping prohibited areas R Other road and traffic rules and regulations R Narrow bridges COMAND may give incorrect navigation comman ...
before the change of direction with the request Please turn right in 900 ft . The announced distance to the next change of direction depends on the type of road and its permissible speed limit. The display is now split into two sectors. In the left half, you see the normal map view. The right half shows an enlarged section of the area around the in ...
Example display : Point of the next change in direction (light blue circle) ; Point of the change of direction after next = Next change of direction (in this case, turn off to the right) ? Graphic representation of the distance to the next change of direction A Distance to the next change of direction B Possible lane (light blue) C Recommended lane ...
Display and description of lane recommendations The colors used in the lane recommendation display vary depending on whether day or night design is switched on. Lane Day design Night design Recommended lane C In this lane, you will be able to complete the next two changes of direction without changing lanes. Dark blue Light blue Possible lane B In ...
X Select Cancel Route Guidance and press W to confirm. Continuing route guidance X To activate navigation mode: press the S function button once or twice. X To show the menu: press W the COMAND controller. X Select Destination in the navigation system menu bar by turning cVd the COMAND controller and press W to confirm. X Select Continue Route Guid ...
Avoiding a section of the route blocked by a traffic jam This function blocks a section of the route ahead of you. You can set the length of the blocked route section. If possible, COMAND calculates a detour around the blocked section of the route. X To activate navigation mode: press the S function button once or twice. X To show the menu: press W ...
Displaying destination information Prerequisite: you have entered a destination ( Y page 138) and possibly an intermediate stop ( Y page 146). X To activate navigation mode: press the S function button once or twice. X To show the menu: press W the COMAND controller. X Select Info in the menu bar by turning cVd the COMAND controller and press W to ...
i If the first or last route section is highlighted, you cannot select Previous or Next . X To zoom in or out of the map: select N or M and press W to confirm. X To close the route overview: select Back and press W to confirm. Where am I? You can view your current position whether or not route guidance has been interrupted. : Current position ; Nex ...
destination : . You will hear the announcement: "Please follow the arrow on the display". Route guidance from an off-road location to a destination If the vehicle position is within the area covered by the digital map, but the map does not contain any information about that location, the vehicle is in an off-road location. COMAND is also ...
Real-time traffic reports on the map COMAND can show certain traffic incidents on the map. The incidents are shown on the map at a scale from 1/16 mi to 20 mi. X Set the map scale ( Y page 168). 12 Icon display for the section of route affected 3 Icon for incident on the route 4 Current position and direction of travel 5 Map scale i COMAND uses cor ...
Icon for real-time traffic reports Icon Description Traffic reports in the map display Warning (red) A warning appears, for example, relating to lost cargo. Caution (yellow) A warning appears, for example, relating to roadwork that does not affect the flow of traffic. Slow-moving traffic This appears at the beginning of a traffic jam (average speed ...
Displaying real-time traffic reports X If necessary, switch to navigation mode and show the menu ( Y page 137). X Select Traffic in the navigation system menu bar by turning cVd the COMAND controller and press W to confirm. If you see the No traffic messages. message: This means that: R no traffic reports have been received yet. R no traffic report ...
6 Report text C First exit/intersection after the affected route section ends X To scroll within a report or to access the next report: turn cVd the COMAND controller. X To return to the list of messages: press W or slide XVY the COMAND controller. Showing icon information Example display : Affected section of freeway ; Icon for an event X To show ...
save the home address without starting route guidance. X To enter the home address for the first time: select Assign Address Book Entry and press W to confirm. X Select Home or Work and press W to confirm. X To change the home address: select Change and press W to confirm. X Select Assign Address Book Entry and press W to confirm. i If you select N ...
X Select a destination by turning cVd the COMAND controller and press W to confirm. The destination address is shown. X Select Save and press W to confirm. You can now select storage options. Selecting storing options X To save the destination without a name: select Save without Name and press W to confirm. COMAND stores the destination in the dest ...
will appear asking whether you wish to overwrite the existing data. X Select Yes or No and press W to confirm. If you select Yes , COMAND stores the data. Deleting a destination or the home address from the destination memory X To activate navigation mode: press the S function button once or twice. X To show the menu: press W the COMAND controller. ...
Storing the crosshair position in the list of previous destinations Route guidance not active A crosshair appears on the map if you have moved the map manually. You can store the crosshair position as a destination in the list of previous destinations. X To show the menu: press W the COMAND controller. X Select Position in the navigation system men ...
Moving the map Showing the crosshair X To hide the menu: slide ZV the COMAND controller and, when the Full screen menu item is shown, press W . X To move the map: slide XVY , ZV Æ or aVb the COMAND controller. A crosshair appears on the map. If you slide it again, the map moves in the corresponding direction under the crosshair. Map with crosshair ...
Map display Setting the map orientation Map orientation : Current map orientation The following display modes are possible: R 0 North orientation (the map view is displayed so that north is always up). R ¤ Orientation in direction of travel (the map is displayed so that the direction of travel is always up; the orange point of the icon points nort ...
X Select Navi in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. X Select POI Symbols on Map and press W to confirm. X Select Standard Symbols , Personal Symbols or No Symbols . If you select Personal Symbols , the list of points of interest appears. X To switch the icon display on/off: select a poi ...
Geo-coordinate display Geo-coordinate display active : Current height above average sea level, rounded ; Current vehicle position: latitude coordinates = Current vehicle position: longitude coordinates ? Number of GPS satellites currently being used There must be sufficient GPS reception for all displays to be shown. If this is not the case, the di ...
: Hills ; Buildings = Important buildings Showing the map data version X To show the menu: press W the COMAND controller. X Select Navi in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. X Select Map Version and press W to confirm. The map data version number is shown. Information about new versions ...
X Select Navi in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. X Select Highway information and press W to confirm. Depending on the previous state, switch the option on O or off ª . SIRIUS XM service Displaying SIRIUS XM service information You can display the SIRIUS XM service information. X To ...
Information about new versions of map software can be obtained from an authorized Mercedes-Benz Center. You can have your map software updated there with a DVD, or you can update it yourself. Updating process G WARNING Never leave the engine running in enclosed spaces. The exhaust gases contain toxic carbon monoxide. Breathing in exhaust fumes is a ...
Map software is not compatible with the current system software You will see a message that the system software and the map software are not compatible. X To confirm the message: press W . COMAND ejects the DVD. X Take the DVD out of the slot. X Have the system software updated at an authorized Mercedes-Benz Center. The map software cannot be insta ...
prompting you to insert the second DVD. Follow the instructions on the display. X To allow the installation to run to the end without canceling: take no further action. When the installation process is successfully completed, you will see a message to this effect. X To confirm the message: press W . COMAND ejects the DVD. X Take the DVD out of the ...
Problems with the navigation system Problem Possible causes/consequences and M Solutions COMAND is unable to continue route guidance after the journey has been interrupted. Route guidance is canceled if you interrupt the journey for more than two hours. "Interrupting the journey" refers to stopping the vehicle and switching off COMAND. &q ...
Problem Possible causes/consequences and M Solutions You see a message informing you that the DVD containing the digital map is incompatible with the system software. The DVD containing the digital map cannot be used for the update. X To confirm the message: press W the COMAND controller. X Eject the DVD. X Have the system software updated at an au ...
Call disconnection while the vehicle is in motion A call may be disconnected if: R there is insufficient network coverage in certain areas. R you move from one transmitter/receiver area (cell) into another and no channels are free. R you use a SIM card which is not compatible with the network available. R you are using a mobile phone with "Twi ...
R a valid and operational SIM card must be inserted in the mobile phone. R the mobile phone is connected to COMAND via Bluetooth ® . If you cannot make an emergency call, you must arrange rescue measures yourself. X Enter numbers using the number keypad ( Y page 186). X Press the 6 button. The telephone makes the connection. X Wait for the emergen ...
When you authorize a new mobile phone, it is connected automatically. Connecting comprises: R searching for a Bluetooth ® -capable mobile phone R subsequently authorizing it You can connect up to 15 mobile phones. Searching for a mobile phone X To call up the telephone menu: press the S function button once or twice. X Select Data/Connections in t ...
If you want to reauthorize a mobile phone following de-authorization, you can select a different passcode. X To enter a passcode in COMAND: press the number keys in sequence. ¬ is available for selection after the first number has been entered. or X Select the digits one by one by turning cVd the COMAND controller and press W to confirm. X To conf ...
COMAND controller and press W to confirm. The selected mobile phone is searched for and connected if it is within Bluetooth ® range and if Bluetooth ® is activated. Only one mobile phone can be connected at any one time. The currently connected mobile phone is indicated by the # dot in the Bluetooth ® telephones list ( Y page 181). Displaying de ...
Example display: telephone basic menu (Bluetooth ® interface) : Network provider icon ; Signal strength of mobile phone network È = Receiver icon ¡ or ¢ ? To display the COMAND phone book A To display call lists B Character bar with characters for phone number entry C Bluetooth ® name of the currently connected mobile phone i Displays : and ; ...
X To reject: select Reject by turning cVd the COMAND controller and press W to confirm. or X Press the ~ button on the telephone keypad or on the multifunction steering wheel. X To accept: confirm Accept by pressing W . or X Press the 6 button on the telephone keypad. or X Press the 6 or ? button on the multifunction steering wheel. Once you have a ...
i The redialing function is also available using the on-board computer ( Y page 345). Calling voicemail This function is only available if it is supported by the mobile phone network provider. You can only call voicemail if the voicemail number is stored as preset 1 on the SIM card. X Press and hold the 4 button on the telephone keypad. or X Use th ...
You can be called by more than one person (call waiting) while you are making a telephone call. In the same way, you can call another party while already on the phone with someone. You can either toggle between these two conversations or interconnect them to create a conference call. You can simultaneously switch back and forth between two parties ...
: Active party ; Party on hold = To interconnect parties by creating a conference connection X To interconnect parties by creating a conference connection: select Conference = by turning cVd the COMAND controller and press W to confirm. Sending DTMF tones This function is not supported by all mobile phones. Answering machines or other devices can b ...
The address book organizes and stores entries that are entered from different sources (mobile phone, SD memory card, Bluetooth ® import, COMAND phone book, navigation). You can use these entries to make telephone calls and for navigation. You can create a maximum of 3000 address book entries. Importing contacts automatically COMAND automatically i ...
R Bluetooth ® must be activated in COMAND and on the Bluetooth ® device ( N operating instructions of the device). R the Bluetooth ® device must be able to send vCards via Bluetooth ® ( N operating instructions of the device). R the Bluetooth ® device in the vehicle must be switched on. i If you switch to another main function, e.g. navigation ...
cVd the COMAND controller and press W to confirm. X Address book: select Data/Connections in the telephone basic menu by sliding V Æ and turning cVd the COMAND controller and press W to confirm. X Select Address Book and press W to confirm. X To switch from the character bar to the list: slide ZV the COMAND controller until the character bar is hi ...
: Entry mark (cursor) ; Data field = Two-line character bar B To select the language p To select the character set * / E To select uppercase and lowercase letters % Back F To delete your selection ¬ To confirm your selection ? Preset phone category X Enter the respective data in the data fields. X To enter data in the data field: select the respec ...
X To delete an individual contact: select the entry ( Y page 191). X Select Options by sliding VY the COMAND controller and press W to confirm. X Select Delete and press W to confirm. A prompt appears asking whether the data should be deleted. X Select Yes and press W to confirm. i Automatically imported contacts cannot be deleted ( Y page 190). Ca ...
X Select Navigate and press W to confirm. X Select Start and press W to confirm. Voice tags i Voice tags are entered via the Voice Control System; see the separate operating instructions for the Voice Control System. Adding or changing a voice tag i You can add one voice tag per address book entry. X Search for an address book entry with or without ...
Example display: list of calls made : To close the list ; Telephone number/name if known = To call up options (e.g. save) X Select an entry by sliding V Æ the COMAND controller. X To dial a phone number: press the 6 button. or X Press W to confirm. Unanswered incoming calls have the á symbol in front of the name or phone number. Storing a phone n ...
: Data fields for surname, first name and company ; Number category = Telephone category ? Data field for the telephone number, filled in automatically A Two-line character bar X Proceed as described under "Entering characters" in the "Entering characters in the address and phone books" section ( Y page 123). Adding a phone numb ...
If another audio mode is switched on, you can now switch to radio mode in the audio menu. X Select Audio by sliding ZV the COMAND controller and pressing W to confirm. The audio menu appears. Example display: audio menu : Current audio operating mode ; Main function bar = Audio menu X Select FM/AM radio by turning cVd the COMAND controller and pres ...
X Directly in the station presets: select Presets by sliding V Æ and turning cVd the COMAND controller and press W to confirm. or X Press W the COMAND controller when the display/selection window is active. The station preset memory appears. The # dot indicates under which preset the currently selected station is stored. X Select a station by turn ...
beginning with preset 1. The storing process ends once the highest frequency has been reached or once ten stations have been found. Any stations stored manually under the presets will be lost. COMAND may not occupy all memory slots when storing. X Option 1: press W the COMAND controller when the display/selection window is active. The station prese ...
X Select a channel by turning cVd the COMAND controller and press W to confirm. or X Press a number key on the telephone keypad, e.g. 4 , at any time. Displaying station information This function is only available for analog FM and digital AM/FM programs (HD Radio). Information relevant to the current station is shown below the main function bar. X ...
Switching on HD Radio i As HD Radio stations are broadcast in the AM/FM wavebands, operating HD Radio is very similar to operating analog AM/FM radio. This section describes only those functions that differ from standard FM radio functions. Operating analog FM/AM radio is described in the "Radio" section ( Y page 197). You can deactivate ...
Displaying program information X Select Audio in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. X Select Audio by sliding ZV the COMAND controller and pressing W to confirm. The audio menu appears. X Select HD Radio by sliding ZV the COMAND controller and press W to confirm. X Select Info in the HD ...
http://www.siriuscanada.com (Canada). Once the connection has been established: X Follow the instructions of the service staff. The activation process may take up to ten minutes. If the activation is completed successfully, the No Service message appears in the display, followed by the satellite radio main menu. i If registration is not included wh ...
Selecting a category X To call up the category list: select Category by turning cVd the COMAND controller and press W to confirm. The category list appears. X To select a category: select a category by turning cVd the COMAND controller and pressing W to confirm. The category selected is shown in the display. You hear the station last selected for t ...
X Select a preset by turning cVd the COMAND controller and press and hold W until you hear a tone. or X Press and hold a number button, e.g. 4 , until you hear a tone. The channel is stored under the preset. Storing channels automatically This function automatically stores channels with adequate reception in the preset memory. Channels stored manua ...
Audio CD/DVD and MP3 mode Important safety notes G WARNING COMAND is classified as a Class 1 laser product. You must not open the casing. If you open the casing, or if the casing is faulty or damaged, there is a risk of exposure to invisible laser radiation. This may damage your eyes, or those of others. COMAND does not contain any parts that can b ...
X Remove the CD/DVD from slot : . The DVD changer switches to the next loaded magazine tray and ejects the CD/ DVD. X Repeat the last step until the magazine is empty. Loading and removing SD cards i Not all SD memory cards are designed for the temperatures which may be reached in the vehicle. Due to the wide range of SD cards available on the mark ...
C Graphic time and track display D Sound settings E Current playback option F Media selection G Music search H Recording (saving) music I CD functions Example display: audio DVD mode : Disc type ; Track name = Disc number ? Disc name (only if stored on the disc) A Track time B Graphic time and track display C Sound settings D Current playback optio ...
Only in audio DVD mode X To pause playback: switch on audio DVD mode ( Y page 208). X Select Ë by sliding V Æ and turning cVd the COMAND controller and press W to confirm. The Ë display changes to Ì . X To continue playback: select Ì and press W to confirm. Playback continues from the point where it was interrupted. The Ì display changes to ? ...
MUSIC REGISTER, position 3 Media Interface, position 4 USB, position 5 X Select the data medium by turning cVd the COMAND controller and press W to confirm. i If you select a video DVD, the system switches to video DVD mode ( Y page 227). Selecting a track using the number keypad X Press a number button, e.g. n , when the display/selection window i ...
Fast forward/rewind X While the display/selection window is active, slide XVY and hold the COMAND controller until the desired position has been reached. Music search You can use the following characteristics to search music: R Keyword search R Playlist R Artists R Albums R Tracks R Genres R Year X In audio mode, select Search by sliding V Æ or tu ...
? Title selection A To start the copying process B Name of the copied data C Cancel procedure without copying files D Media position in the media list X Select START by sliding V Æ and turning cVd and confirm with W . All music tracks from the audio CD are copied to COMAND's MUSIC REGISTER as MP3 files. X To copy individual music tracks: sele ...
X Switch on audio CD mode ( Y page 208). X Select CD by sliding V Æ and turning cVd the COMAND controller and press W to confirm. X Select Gracenote Media Database by turning cVd the COMAND controller and press W to confirm. Switch the function on O or off ª . Updating Gracenote ® music recognition technology and the Gracenote Media Database The ...
or when you select a different medium. If an option is selected, it remains selected after COMAND is switched on or off. Notes on MP3 mode Permissible discs R CD-R and CD-RW R DVD+R and DVD+RW R DVD-R and DVD-RW R SD memory card: R USB stick R iPod ® R MP3 player Permissible file systems R ISO 9660/Joliet standard for CDs R UDF for audio and video ...
Notes on copyright MP3 or WMA tracks that you create or play back are generally subject to copyright protection in accordance with the applicable international and national regulations. In many countries, reproductions, even for private use, are not permitted without the prior consent of the copyright holder. Make sure that you know about the appli ...
Example display: MUSIC REGISTER : Type of data carrier: MUSIC REGISTER ; Track number = Track name ? Track time A Graphic time and track display B Current playback settings (no symbol for "Normal track sequence") C Sound settings D Media selection E Current folder F Search functions G Data carrier position in the media list H To call up t ...
3. Starting the copying process : To copy from a memory card ; To copy to the MUSIC REGISTER = Memory requirement, see "Calling up memory space info" ( Y page 218) ? To start the copying process A Name of the data carrier from which data is being copied and storage location B To cancel copying of music files C Data carrier position in the ...
Folder functions Introduction You can view the content of the MUSIC REGISTER, change folder or track names and delete individual folders or tracks. Calling up a folder X Select Search by sliding V Æ and turning cVd the COMAND controller and press W to confirm. X Select Folder and press W to confirm. You see the contents of the current folder. X To ...
i The Normal Track Sequence option is automatically selected when you change the disc you are currently listening to or when you select a different medium. If an option is selected, it remains selected after COMAND is switched on or off. Media Interface mode Connection options Overview You will find the connection sockets in the glove box. Device-s ...
X Connect the external device with suitable socket : , ; or = . COMAND activates the device automatically for sockets ; and = . COMAND does not activate the device automatically for socket : . If you remove a device from sockets ; and = , the No device connected message appears. i A connected iPod ® or MP3 player should not be simultaneously opera ...
under the corresponding position and press W to confirm. COMAND activates the connected device. You will see a message to this effect. The basic display then appears. If no device is connected, you will see the Media Interface entry instead of a device name. Example display: iPod mode : Data medium type ; Track number = Track name ? Graphic time di ...
Fast forward/rewind X While the display/selection window is active, slide XVY and hold the COMAND controller until the desired position has been reached. i On an iPod ® , fast rewind only functions within the current track. Selecting a category/playlist/folder iPod ® and certain MP3 players For an iPod ® or MP3 player, you can select tracks usin ...
Playing back the contents of a category or folder X Select the category or folder by turning cVd the COMAND controller. X Press W the COMAND controller for longer than two seconds. The content of the category or folder selected is played in accordance with the playback option ( Y page 224) selected. Alphabetical track selection iPod ® and MP3 play ...
The tracks in the currently active category or folder, including any subfolders, are played in random order. i For USB devices, the random playlists offer a maximum of 300 tracks chosen at random. X To select a playback option: select Media Interface in the basic display by sliding V Æ and turning cVd the COMAND controller and press W to confirm. ...
Activating audio AUX mode When you connect an external audio source, audio AUX is not selected automatically. X Select Audio in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. X Select AUX using cVd and press W to confirm. The audio AUX menu appears. The medium in the external audio source is played ...
Changing the picture format X Press W the COMAND controller to show the menu. X Select Video by sliding V Æ and turning cVd the COMAND controller and press W to confirm. X Select Video DVD and press W to confirm. X Select DVD-V and press W to confirm. The DVD-V menu appears. The ä dot in front of a menu item indicates the current setting. X Selec ...
authorized Mercedes-Benz Center. This will allow you to play video DVDs with a different region code, provided that they are produced in accordance with the PAL or NTSC standard. The region code can be changed up to five times. Function restrictions Depending on the DVD, it is possible that certain functions or actions will be temporarily blocked o ...
A Media selection B Sound settings Fast forward/rewind X Slide XVY and hold the COMAND controller until the desired position has been reached. You see the navigation menu. Selecting a video DVD X Press W the COMAND controller to show the menu. X Select Media by sliding V Æ and turning cVd the COMAND controller and press W to confirm. The media lis ...
It may also be possible to select the scene/ chapter from within the menu stored on the DVD. X To skip forwards or back: turn cVd or slide XVY the COMAND controller. The control menu ( Y page 228) appears for approximately eight seconds. X On the multifunction steering wheel: switch on video DVD mode in COMAND ( Y page 228). X Use the = or ; button ...
COMAND executes the action. Make a selection from the further options, if necessary. COMAND then switches back to the DVD menu. i Depending on the DVD, it is possible that the Back (to the movie) , Play , Stop , C , D or Go up menu item may not be operative or operative only at certain points of the DVD. To indicate this, the K symbol is shown in t ...
X Select DVD Functions and press W to confirm. X Select Subtitles or Camera angle and press W to confirm. In both cases, a menu appears. The # dot in front of an entry indicates the current setting. X Select a setting by turning cVd the COMAND controller and press W to confirm. X To exit the menu: slide XVY the COMAND controller. Interactive conten ...
gradually. This enables you to determine whether the system is able to play the music at high volume without distorting it. Vehicle Vehicle functions General information In this menu, you can set the following vehicle functions: R ECO R multicontour seat settings R rear window blind R EASY-ENTRY/EXIT feature R exterior lighting delayed switch-off R ...
X To switch the ECO start/stop function on/off: select Vehicle in the main function bar by sliding XVY and turning cVd the COMAND controller and press W to confirm. The main area is active. X Select the ECO function by sliding XVY or turning cVd the COMAND controller and press W to confirm. The ECO start/stop function is switched on and off alterna ...
lever or press the position button of the memory function. If there is a risk of entrapment by the seat, you can also cancel the adjustment procedure by moving the switch for seat adjustment. The steering column and driver's seat stop moving immediately. Never leave children unsupervised in the vehicle. They could open the driver's door a ...
X To set the interior/exterior lighting delayed switch-off time: select Vehicle in the main function bar by sliding XVY and turning cVd the COMAND controller and press W to confirm. The main area is active. X Select the Interior Lighting Delayed Shut-off / Exterior Lighting Delayed Shut-off menu by sliding XVY or turning cVd the COMAND controller. ...
X To switch the locator lighting on/off: select Vehicle in the main function bar by sliding XVY and turning cVd the COMAND controller and press W to confirm. The main area is active. X Select the Locator Lighting function by sliding XVY or turning cVd the COMAND controller and press W to confirm. Switching the automatic locking feature on/off You c ...
To do so, make certain that the SmartKey is in position 2 in the ignition lock. Air-conditioning function bar : To set the temperature, left ; To set the air distribution, left = To set the airflow, left ? Climate control main menu ( Y page 239) A To set the airflow, right B To set the air distribution, right C To set the temperature, right Setting ...
Setting the airflow You can set the airflow separately for the driver’s and front-passenger side. X Select left airflow = or right airflow A by turning cVd the COMAND controller and press W to confirm. X To adjust the airflow: slide ZV Æ or turn cVd the COMAND controller. X To confirm the selection: press W the COMAND controller. Climate control ...
cVd the COMAND controller and press W to confirm. The climate control menu opens. X To switch on: select Æ and press W . X To switch off: select Æ and press W . A tick appears. Controlling climate control centrally You can use the Mono function to set all the air-conditioning zones in the vehicle to the same settings. If the Mono function is swit ...
i This setting is quite effective in automatic mode, especially at high outside temperatures. If the vehicle has become very warm and the automatic air conditioning is cooling the interior, the blower settings are briefly canceled. X Select the climate control main menu in the air-conditioning function bar by turning cVd the COMAND controller and p ...
X Make sure that the SmartKey is in position 2 in the ignition lock. X Press the T function button. Selecting the seat You must first select the seat for which you wish to make adjustments. X Press the T function button. The main area is active. X To move to the lower menu bar: select by sliding ZV Æ the COMAND controller and press W to confirm. X ...
Adjusting the backrest curvature in the lumbar region This function allows you to adjust the air cushions in the lumbar region of the backrest. X Select the seat ( Y page 242). X Select Lumbar by sliding XVY or turning cVd the COMAND controller and press W to confirm. A crosshair appears. You can make two settings: R Vertical: to move the point of ...
X Select Setting by sliding ZV Æ or turning cVd the COMAND controller and press W to confirm. Massage function (PULSE) The massage function helps you to prevent muscle tension on long journeys. X Select the seat ( Y page 242). X Select Massage by sliding XVY or turning cVd the COMAND controller and press W to confirm. A list appears. You can selec ...
X Select Upload/Download Data and press W to confirm. X Select Copy Data to Storage Medium and press W to confirm. X Select the storage medium to which the data should be copied. X Select Start Copying . COMAND checks whether the storage medium has enough storage capacity. If there is enough storage capacity, the data is copied to the storage mediu ...
246 ...
Useful information ............................ 248 Exterior lighting ................................ 248 Interior lighting ................................. 253 Replacing bulbs ................................. 254 Windshield wipers ............................ 255 247 Lights and windshield wipers ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
X Turn the light switch to $ or c . or X If the rear fog lamp is switched on: press the light switch in to the stop. Low-beam headlamps X To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. X Turn the light switch to L . The T indicator lamp on the light switch lights up. X To switch off th ...
The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times. G WARNING When it is dark or foggy, turn the light switch quickly from c to L . Otherwise, the headlamps could switch off temporarily and you could cause an accident. Front fog lamps G WARNING If you suspect that driving conditions ...
= High-beam flasher ? Left turn signal X To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow ; or ? . The corresponding turn signal flashes three times. X To indicate: press the combination switch beyond the pressure point in the direction of arrow ; or ? . High-beam headlamps X To switch on the ...
Cornering light function The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. The cornering light function can only be activated when the low-beam headlamps are switched on. Active: R if you are driving at speeds below 25 mph (4 ...
the high-beam headlamps are switched on automatically. The K indicator lamp in the instrument cluster also lights up. If you drive at speeds below approximately 30 mph (45 km/h) or if other road users are identified or if the roads are sufficiently illuminated: the high-beam headlamps are switched off automatically. The K indicator lamp in the inst ...
Interior lighting control Important notes In order to prevent the vehicle's battery from discharging, the interior lighting functions are automatically deactivated after some time except for when the SmartKey is in position 2 in the ignition lock. Automatic interior lighting control X To switch on/off: press the | button. The OFF indicator lam ...
Keep bulbs out of the reach of children. Otherwise, they could, for example, damage the bulbs and injure themselves. Never use a bulb which has been dropped. Such a bulb may explode and injure you. Halogen bulbs are pressurized and could explode when you change them, especially if they are very hot. You should therefore wear eye protection and glov ...
that has collected on the windshield can scratch the glass if wiping takes place when the windshield is dry. ! If the windshield wipers leave smears on the windshield after the vehicle has been washed in an automatic car wash, wax or other residues may be the reason for this. Clean the windshield using washer fluid after washing the vehicle in an a ...
Changing the windshield wiper blades Moving the wiper blades to a vertical position Vehicles without KEYLESS-GO X Turn the SmartKey to position 1 or 2 in the ignition lock. X Set the windshield wipers to position ° . X When the wiper arms have reached a vertical position, turn the SmartKey to position 0 and remove it from the ignition lock. Vehicl ...
258 ...
Useful information ............................ 260 Overview of climate control sys- tems ................................................... 260 Operating the climate control sys- tems ................................................... 261 Setting the air vents ......................... 266 259 Climate control ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
Automatic climate control panel : Sets climate control to automatic mode, left ( Y page 262) ; Sets the temperature, left ( Y page 263) = Sets the airflow, left ( Y page 263) ? Defrosts the windshield ( Y page 263) A Activates/deactivates air-recirculation mode ( Y page 265) B Switches climate control on /off( Y page 261) C Switches the residual he ...
i Switch on climate control primarily using the à rocker switch ( Y page 262). Activating/deactivating X Turn the SmartKey to position 2 in the ignition lock. X To activate: press the ^ rocker switch up or down. The indicator lamp in the rocker switch goes out. The previously selected settings come into effect again. X To deactivate: press the ^ r ...
Setting the temperature Climate control climate zones You can select different temperature settings for the driver's and front-passenger sides as well as for the footwells. X Turn the SmartKey to position 2 in the ignition lock. X To increase/reduce: press the w rocker switch up or down. Only change the temperature setting in small increments. ...
X To deactivate: press the ¬ rocker switch up or down. The indicator lamp in the ¬ rocker switch goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Air-recirculation mode remains deactivated. or X Press the w rocker switch up or down. or X Press the K rocker switch up or d ...
Activating/deactivating air- recirculation mode You can deactivate the flow of fresh air if unpleasant odors are entering the vehicle from outside. The air already inside the vehicle will then be recirculated. G WARNING Fogged windows impair visibility, endangering you and others. If the windows begin to fog on the inside, switching off the air rec ...
Setting the air vents Important safety notes G WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could cause burns or frostbite to unprotected skin in the immediate area of the air vents. Always keep sufficient distanc ...
X To switch the ventilation on/off: push rocker switch down ; or up : . Setting the glove box air vent When automatic climate control is activated, the glove box can be ventilated, for instance to cool its contents. The level of airflow depends on the airflow and air distribution settings. ! Close the air vent when heating the vehicle. At high outs ...
268 ...
Useful information ............................ 270 Breaking-in notes .............................. 270 Driving ............................................... 270 Automatic transmission ................... 277 Refueling ............................................ 284 Parking ............................................... 287 Driving tips ...... ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. ! Warm up the engine quickly. Do not use the engine's full performance until it has reached operating temperature. Only shift the automatic transmission to the desired dr ...
X Insert Start/Stop button : into ignition lock ; . i When you insert Start/Stop button : into ignition lock ; , the system requires a detection time of approximately two seconds before you can use Start/ Stop button : . Start/Stop button = USA only ? Canada only X Position 0 : if Start/Stop button : has not yet been pressed, this corresponds to th ...
X Turn the SmartKey to position 3 in the ignition lock ( Y page 271) and release it as soon as the engine is running. Using KEYLESS-GO to start the engine G WARNING As long as the SmartKey is in your vehicle, the vehicle can be started. Therefore, never leave children unattended in the vehicle, as they could otherwise accidentally start the engine. ...
G WARNING Never leave the vehicle when it is held by hill start assist. After approximately one second, hill start assist will no longer brake your vehicle and it could roll away. X Take your foot off the brake pedal. i Once you have taken your foot off the brake pedal, the vehicle is held for around one second. X Pull away. Hill start assist will ...
R the set temperature for the vehicle interior has been reached. R the battery is sufficiently charged. R the system detects that the windshield is not fogged up when the air-conditioning system is switched on. R the hood is closed. R no engine-relevant diagnostics are active. R the driver's door is closed and the seat belt is fastened. Automa ...
Problems with the engine Problem Possible causes/consequences and M Solutions The engine does not start. The starter motor can be heard. R There is a malfunction in the engine electronics. R There is a malfunction in the fuel supply. X Before attempting to start the engine again, turn the SmartKey in the ignition back to position 0 or press the Sta ...
Automatic transmission Important safety notes G WARNING It is dangerous to shift the automatic transmission out of parking position P or neutral position N if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. You could lose control of the vehicle an ...
Shifting to neutral N X When the vehicle is stationary, depress the brake pedal. X Push the DIRECT SELECT lever up or down to the first point of resistance. If the engine has been switched off, the automatic transmission automatically switches to N . Remaining in neutral N If the automatic transmission is to remain in neutral N , e.g. for washing t ...
transmission positions you can change using the DIRECT SELECT lever. ! If the transmission position display in the multifunction display is not working, you should pull away carefully to check whether the desired transmission position is engaged. Ideally, you should select transmission position D and drive program E (drive program C on AMG vehicles ...
Driving tips Kickdown Use kickdown for maximum acceleration. X Vehicles for USA except AMG vehicles: fully depress the accelerator pedal. The transmission shifts to a lower gear depending on the engine speed. X Vehicles for Canada except AMG vehicles: depress the accelerator pedal beyond the pressure point. The transmission shifts to a lower gear d ...
AMG vehicles: only change from automatic drive program C or S to manual drive program M when the vehicle is stationary. X Press program selector button : repeatedly until the letter for the desired gearshift program appears in the multifunction display. i When the engine is started, the automatic transmission always switches to automatic drive prog ...
Restricting the shift range X Pull the left-hand steering wheel paddle shifter. The automatic transmission shifts down one gear and restricts the shift range to the relevant gear. i If the engine exceeds the maximum engine speed when shifting down, the automatic transmission protects against engine damage by not shifting down. i If the maximum engi ...
: Gear indicator ; Upshift indicator Downshifting X Pull the left-hand steering wheel paddle shifter ( Y page 281). The automatic transmission shifts down to the next gear. i If you brake the vehicle or stop without shifting down, the automatic transmission will shift down to a gear that will allow the vehicle to accelerate or pull away again. i Fo ...
Problems with the transmission Problem Possible causes/consequences and M Solutions The transmission has problems shifting gear. The transmission is losing oil. X Have the transmission checked at a qualified specialist workshop immediately. The acceleration ability is deteriorating. The transmission no longer changes gear. The transmission is in em ...
! Do not use diesel to refuel vehicles with a gasoline engine. Even small amounts of the wrong fuel result in damage to the fuel system and engine. ! Do not switch on the ignition if you accidentally refuel with the wrong fuel. Otherwise, the fuel will enter the fuel lines. Notify a qualified specialist workshop and have the fuel tank and fuel line ...
i Close the fuel filler flap before locking the vehicle. Otherwise, the locking pin of the central locking prevents the fuel filler flap from closing. 286 Refueling Driving and parking ...
Problems with fuel and the fuel tank Problem Possible causes/consequences and M Solutions Fuel is leaking from the vehicle. G Risk of explosion or fire The fuel line or the fuel tank is defective. X Turn the SmartKey to position 0 in the ignition lock immediately and remove it ( Y page 271). X Do not restart the engine under any circumstances. X Co ...
G WARNING Keep in mind that turning off the engine alone only will shift the automatic transmission into neutral position N automatically. Always shift the automatic transmission into park position P before turning off the engine. Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. i If you cannot ...
1 in the ignition lock or if the ignition has been switched on using the Start/Stop button. Engaging the electric parking brake automatically The electric parking brake is automatically applied if HOLD or DISTRONIC PLUS brakes the vehicle until it is stationary and at least one of the following conditions is fulfilled: R the engine is switched off. ...
If you leave the vehicle parked for longer than six weeks, the vehicle may suffer damage as a result of lack of use. X Visit a qualified specialist workshop and seek advice. Driving tips General driving tips Important safety notes G WARNING Always remember that you must concentrate primarily on driving the vehicle. The driver's concentration m ...
Steering and braking requires significantly more effort and you could lose control of the vehicle and cause an accident as a result. Do not turn off the engine while the vehicle is in motion. Exhaust check G WARNING Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause uncons ...
more firmly. Maintain a safe distance from vehicles in front. After driving on a wet road or having the vehicle washed, brake firmly while paying attention to the traffic conditions. This will warm up the brake discs, thereby drying them more quickly and protecting them against corrosion. Limited braking performance on salt- treated roads G WARNING ...
If the brake system has only been subject to moderate loads, you should test the functionality of your brakes at regular intervals. To do so, press firmly on the brake pedal when driving at a high speed. This improves the grip of the brake pads. G WARNING Make sure that you do not endanger other road users when you apply the brakes. You can find a ...
Winter driving Important safety notes G WARNING If the vehicle becomes trapped in snow, ensure that snow is kept away from the exhaust pipe and from around the vehicle as long as the engine is running. Otherwise, poisonous carbon monoxide (CO) may enter the vehicle, resulting in loss of consciousness and even death. To assure sufficient fresh air v ...
traffic because conditions do not allow safe driving at a constant speed. R The use of the cruise control can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control. R Deactivate the cruise control when driving in fog. The "Resume" function should only be operated if the driver is fully ...
of the vehicle could cause an accident and/ or serious injury to you and others. X Press the cruise control lever up : for a higher speed or down ; for a lower speed. X To adjust the speed in 1 mph increments (1 km/h increments): briefly press the cruise control lever up : or down ; to the pressure point. The last speed stored is increased or decre ...
Non-compliance could lead you to cause an accident in which you and/or others could be seriously injured. G WARNING The DISTRONIC PLUS is a convenience system. Its speed adjustment reduction capability is intended to make cruise control more effective and usable when traffic speeds vary. It is not however, intended to, nor does it, replace the need ...
G WARNING The DISTRONIC PLUS cannot take road and traffic conditions into account. Only use the DISTRONIC PLUS if the road, weather and traffic conditions make it advisable to travel at a constant speed. G WARNING Use of the DISTRONIC PLUS can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of contro ...
with your own braking. This will result in potentially dangerous emergency braking which will not always result in an impact being avoided. Tailgating increases the risk of an accident. G WARNING DISTRONIC PLUS brakes your vehicle with a maximum deceleration of 13 ft/s 2 (4 m/s 2 ). This corresponds to approximately 40% of your vehicle's maxim ...
X Briefly pull the cruise control lever towards you ? , or press it up : or down ; . DISTRONIC PLUS is selected. X Press the cruise control lever repeatedly up : or down ; until the desired speed is set. X Remove your foot from the accelerator pedal. Your vehicle adapts its speed to that of the vehicle in front, but only up to the desired stored sp ...
If these conditions are fulfilled, your vehicle is accelerated. Acceleration will be interrupted if changing lanes takes too long or if the distance between your vehicle and the vehicle in front becomes too small. i When changing lanes, DISTRONIC PLUS monitors the left lane on left-hand drive vehicles and the right lane on right-hand drive vehicles ...
up : or down ; beyond the pressure point. The last speed stored is increased or decreased every time the cruise control lever is pushed up : or down ; . i DISTRONIC PLUS is not deactivated if you depress the accelerator pedal. If you accelerate to overtake, DISTRONIC PLUS adjusts the vehicle's speed to the last speed stored after you have fini ...
i For design reasons, the speed displayed in the speedometer may differ slightly from the speed set for DISTRONIC PLUS. If DISTRONIC PLUS detects a vehicle in front, the speedometer dial lights up between speed of the vehicle in front : and stored speed ; . DISTRONIC PLUS displays in the multifunction display General notes You can select the distan ...
When you deactivate DISTRONIC PLUS, the DISTRONIC PLUS Off message is shown in the multifunction display for approximately five seconds. i The last speed stored remains stored until you switch off the engine. DISTRONIC PLUS is automatically deactivated if: R you engage the electric parking brake or if the vehicle is automatically secured with the e ...
The ability of DISTRONIC PLUS to detect vehicles when cornering is limited. Your vehicle may brake unexpectedly or late. Vehicles traveling on a different line DISTRONIC PLUS may not detect vehicles traveling on a different line. The distance to the vehicle in front will be too short. Other vehicles changing lane DISTRONIC PLUS has not detected the ...
HOLD function General notes The HOLD function can assist the driver in the following situations: R when pulling away, especially on steep slopes R when maneuvering on steep slopes R when waiting in traffic The vehicle is kept stationary without the driver having to depress the brake pedal. The braking effect is canceled and the HOLD function deacti ...
AIRMATIC Vehicle level Important safety notes Your vehicle regulates its height automatically. All-round level control ensures the best possible suspension and constant ground clearance, even with a laden vehicle. When you drive fast, the vehicle is lowered automatically to improve driving safety and to reduce fuel consumption. The following vehicl ...
The damping is tuned individually to each wheel and depends on: R your driving style, e.g. sporty R the road surface condition, e.g. bumps R your individual selection, i.e. sports or comfort Your selection remains stored even if you remove the SmartKey from the ignition lock. Sports tuning The firmer suspension tuning in Sport mode ensures even bet ...
Setting raised level X Start the engine. If indicator lamp ; is not lit: X Press button : . Indicator lamp ; lights up. The vehicle height is adjusted to raised level. Setting the normal level X Start the engine. If indicator lamp ; is lit: X Press button : . Indicator lamp ; goes out. The vehicle is adjusted to normal level. Suspension tuning The ...
whenever a drive wheel spins due to insufficient grip. G WARNING If a drive wheel is spinning due to insufficient traction: R While driving off, apply as little throttle as possible. R While driving, ease up on the accelerator pedal. R Adapt your speed and driving style to the prevailing road conditions. Failure to observe these guidelines could ca ...
Side view Top view Front sensors Center approximately 40in (approximately 100cm) Corners approximately 24in (approximately 60cm) Rear sensors Center approximately 48in (approximately 120cm) Corners approximately 32in (approximately 80cm) ! When parking, pay particular attention to objects above or below the sensors, such as flower pots or trailer d ...
yellow segments showing operational readiness = light up. The selected transmission position determines which warning display is active when the engine is running. Transmission position Warning display D Front area activated R Rear and front areas activated N If the electric parking brake is engaged: no areas are activated If the electric parking b ...
Problems with PARKTRONIC Problem Possible causes/consequences and M Solutions Only the red segments in the PARKTRONIC warning displays are lit. You also hear a warning tone for approximately two seconds. PARKTRONIC is deactivated after approximately 20 seconds, and the indicator lamp in the PARKTRONIC button lights up. PARKTRONIC has malfunctioned ...
G WARNING Objects located above the height range of Parking Guidance will not be detected when the parking space is measured. These objects are not taken into account when the parking procedure is calculated, e.g. overhanging loads, tail sections or loading ramps of goods vehicles. Under some circumstances, Parking Guidance might therefore issue st ...
Guidance only shows parking spaces on the passenger side in the default setting. Parking spaces on the driver's side are displayed as soon as the turn signal on the driver's side is activated. To park on the driver's side, you must leave the driver's side turn signal switched on until you have engaged reverse gear. If a parking ...
Steering tips : Red lane indicating the route the vehicle will take with the steering wheel in its current position ; Yellow lane indicating the route the vehicle will take when you have turned the steering wheel in the required direction X Turn the steering wheel while the vehicle is stationary until red lane : and yellow lane ; overlap. Lane ; is ...
Final position Depending on the size of the parking space, you may now be in an angled position in the parking space. If possible, Parking Guidance will guide you as far back as possible towards the rear limit of the parking space. X Maneuver to the final position if necessary. X Always observe the warning messages displayed by PARKTRONIC ( Y page ...
R the trunk lid is open R it is raining or snowing strongly or if it is foggy R it is night or if you are parking/ maneuvering your vehicle in a very dark area R a very bright white light is affecting the camera R the immediate vicinity is illuminated with fluorescent light (the display of the COMAND system can flicker) R temperature changes abrupt ...
ATTENTION ASSIST Important safety notes ATTENTION ASSIST helps you during long, monotonous journeys such as on freeways and interstate highways. It is active in the range between 50 mph (80 km/h) and 112 mph (180 km/h). If ATTENTION ASSIST detects typical indicators of fatigue or increasing lapses in concentration on the part of the driver, it sugg ...
ATTENTION ASSIST is reset when you continue your journey and starts assessing your tiredness again if: R you switch off the engine. R you take off your seat belt and open the driver's door, e.g. for a change of drivers or to take a break. Night View Assist Plus with spotlight function Important safety notes In addition to the illumination prov ...
Pedestrian recognition G WARNING Pedestrian recognition may be impaired or inoperative if: R pedestrians are partially or entirely obscured by objects, e.g. parked vehicles. R the silhouette of the pedestrian in the Night View Assist Plus display is incomplete or interrupted, e.g. by powerful light reflections. R pedestrians do not contrast with th ...
X To activate: activate Adaptive Highbeam Assist ( Y page 252). X Press button : . The Night View Assist Plus with spotlight function display appears in the multifunction display. Example: display for a slow-moving vehicle : Night View Assist Plus display ; Pedestrian recognized = Framing ? Example: symbol for active spotlight function A Speed disp ...
If you push the combination switch forward beyond the point of resistance again, both systems are reactivated. X To deactivate: press button : again. X Deactivate Adaptive Highbeam Assist ( Y page 252). i If you do not wish to use the spotlight function, you first need to deactivate Night View Assist Plus and then activate it again without the spot ...
Fogged up or dirty windshield If the windshield in front of the camera is fogged up or dirty on the inside or outside, the Night View Assist Plus display is affected. G WARNING Always remember that you must concentrate primarily on driving the vehicle. A driver's attention to the road must always be his/her primary focus when driving. For your ...
Problems with Night View Assist Plus Problem Possible causes/consequences and M Solutions The picture quality of Night View Assist Plus has deteriorated. The windshield wipers are smearing the windshield. X Replace the wiper blades ( Y page 256). The windshield is smeared after the vehicle has been cleaned in a car wash. X Clean the windshield ( Y ...
attentive driving. You are responsible for the vehicle's speed, braking in good time, and steering correctly. Always adapt your driving style to suit the prevailing road and weather conditions. Always pay attention to traffic conditions and your surroundings. Otherwise, you may fail to recognize dangers in time, cause an accident and injure yo ...
Due to the nature of the system: R warnings may be issued in error when driving close to crash barriers or similar solid lane borders. R warnings may be interrupted when driving alongside long vehicles, for example trucks, for a prolonged time. Two Active Blind Spot Assist radar sensors are integrated into the front and rear bumpers respectively. A ...
G WARNING Active Blind Spot Assist is only an aid designed to assist driving. It is not a substitute for attentive driving. In some cases, the course-correcting brake application is not sufficient to avoid a collision. In such a case, you must steer, brake or accelerate. In very rare cases, the system may erroneously detect a danger of collision in ...
the mph display unit is selected, the assistance range begins at 40 mph. G WARNING Active Lane Keeping Assist does not keep your vehicle in its lane. It is only an aid and may detect the lane markings on the road incorrectly or not at all. The system may be impaired or may not function if: R several or no lane markings for a single lane are present ...
application also slightly reduces vehicle speed. If a lane-correcting brake application occurs, the following, for example, appears in the multifunction display: i A further lane-correcting brake application can only occur after your vehicle has returned to the original lane. G WARNING Active Lane Keeping Assist does not keep your vehicle in its la ...
X Switch on Active Lane Keeping Assist using the on-board computer ( Y page 347). Symbol : appears in the instrument cluster. If your speed exceeds 40 mph (60 km/h) and lane markings are detected, symbol : is highlighted in green. Active Lane Keeping Assist is ready for use. Driving systems 331 Driving and parking Z ...
332 ...
Useful information ............................ 334 Important safety notes .................... 334 Displays and operation .................... 334 Menus and submenus ...................... 337 Display messages ............................. 350 Warning and indicator lamps in the instrument cluster ............................ 382 333 On-board compu ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
! A display message is shown if the coolant temperature is too high. If the coolant temperature is over 248 ‡(120 †), do not continue driving. The engine will otherwise be damaged. Tachometer The red band in the tachometer indicates the engine's overrevving range. ! Do not drive in the overrevving range, as this could damage the engine. Th ...
A =; Selects a menu 9: Press briefly: Selects a function or scrolls through lists In the Audio menu: selects a stored station, an audio track or a video scene In the Telephone menu: switches to the phone book and selects a name or a telephone number 9: Press and hold: In the Audio menu: selects a station from the alphabetical list of stations, star ...
Menus and submenus Menu overview The number of menus shown depends on the optional equipment in the vehicle. Function : Trip menu ( Y page 338) ; Navi menu (navigation instructions) ( Y page 339) = Audio menu ( Y page 340) ? AMG menu in AMG vehicles ( Y page 341) A Telephone menu ( Y page 344) B DriveAssist menu ( Y page 345) C Service menu ( Y pag ...
Trip menu Standard display X Press and hold the % button on the steering wheel until the Trip menu with odometer : and trip odometer ; is shown. Trip computer "From start" or "From reset" The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated fro ...
: Digital speedometer Resetting values You can reset the values of the following functions: R trip odometer R trip computer "From start" R trip computer "From reset" X Press the = or ; button on the steering wheel to select the Trip menu. X Press the 9 or : button to select the function that you wish to reset. X Press a . Resett ...
display = next to the symbol for the change of direction ; . This decreases in size as you approach the announced change of direction. Change of direction announced with a lane recommendation Lane recommendations are only displayed if the relevant data is available on the digital map. : Road into which the change of direction leads ; Symbol for cha ...
X To select a stored station: briefly press the 9 or : button. X To select a station from the station list: press and briefly hold the : or 9 button. X To select a station using station search 15 : press and briefly hold the 9 or : button. X Press a to stop the station search function at the desired station. Operating audio player or audio media Au ...
: Gear indicator ; Upshift indicator = Engine oil temperature ? Coolant temperature Upshift indicator up ; indicates that the engine has reached the overrevving range when in the manual gearshift program. Upshift indicator up ; fades out other messages until you have shifted up. When the engine oil temperature is below 80 †, the oil temperature i ...
Timing starts for a new lap. The new lap is timed from when the intermediate time is called up. : Gear indicator ; RACETIMER = Fastest lap time (best lap) Resetting the current lap X Press the W button on the steering wheel to stop the RACETIMER. X Press the X button to reset the lap time to "0”. Deleting all laps You cannot delete individua ...
: Lap ; Lap time = Top speed during lap ? Lap length A Average lap speed X Press the 9 or : button to select a different lap evaluation. Telephone menu Introduction You can establish a Bluetooth ® connection to COMAND ( Y page 181). G WARNING The driver's attention to the road must always be his/her primary focus when driving. For your safety ...
While the on-board computer reads in the SIM card: R you can dial a telephone number from the redial list ( Calls Dialed list). R you can dial a telephone number from the telephone book stored in COMAND. R the multifunction display shows the Reading data... display message below the phone book entries. When the multifunction display shows the Updat ...
Deactivating/activating ESP ® G WARNING Under no circumstances should you deactivate ESP ® when the ÷ ESP ® warning lamp in the instrument cluster flashes. Proceed as follows: R when driving off, apply as little throttle as possible. R while driving, ease up on the accelerator pedal. R adapt your speed to suit the prevailing road and weather co ...
X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press 9 or : to select Blind Spot Assist . X Press the a button. The current selection is displayed. X To activate/deactivate: press the a button again. Activating/deactivating Active Lane Keeping Assist You can use the Lane Keeping Assist function to activate or deac ...
Switching Adaptive Highbeam Assist on/off X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select Adapt. High-beam Asst. . X Press the a button to confirm. X To activate/deactivate: press a again. Switching the additional speedometer on or off An additional digital speedometer can be shown in ...
X Press a to confirm. X To activate/deactivate: press the a button again. Menus and submenus 349 On-board computer and displays Z ...
Display messages General notes G WARNING All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center. Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz Limited Warranty, or resul ...
Safety systems Display messages Possible causes/consequences and M Solutions !÷ Currently Unavailable See Oper. Manual G Risk of accident ABS (Anti-lock Braking System), ESP ® (Electronic Stability Program), BAS (Brake Assist), PRE-SAFE ® , the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE ® Brake may al ...
Display messages Possible causes/consequences and M Solutions !÷ Inoperative See Oper. Manual G Risk of accident ABS, ESP ® , BAS, PRE-SAFE ® , the HOLD function and hill start assist are unavailable due to a malfunction. BAS PLUS and PRE-SAFE ® Brake may also have failed. The $ (USA only)/ J (Canada only), ÷ , å and ! warning lamps in the in ...
Display messages Possible causes/consequences and M Solutions ÷ Inoperative See Oper. Manual G Risk of accident ESP ® , BAS, PRE-SAFE ® , the HOLD function and hill start assist are unavailable due to a malfunction. BAS PLUS and PRE-SAFE ® Brake may also have failed. In addition, the ÷ and å warning lamps light up in the instrument cluster. A ...
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Please Release Parking Brake The red F (USA only)/ ! (Canada only) indicator lamp flashes and a warning tone sounds. You are driving with the electric parking brake applied. X Release the electric parking brake. or X Pull away carefully ( Y page 288). The red ...
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Parking Brake See Oper. Manual The yellow F (USA only)/ ! (Canada only) warning lamp lights up. Additionally, the red F (USA only)/ ! (Canada only) indicator lamp may light up. The electric parking brake is malfunctioning. To release: X Pull the electric park ...
Display messages Possible causes/consequences and M Solutions The yellow F (USA only)/ ! (Canada only) warning lamp lights up. The red F (USA only)/ ! (Canada only) indicator lamp flashes for approximately ten seconds after the electric parking brake has been applied or released. It then goes out or remains lit. The electric parking brake is malfun ...
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Parking Brake Inoperative The yellow F (USA only)/ ! (Canada only) warning lamp lights up. The red F (USA only)/ ! (Canada only) indicator lamp flashes for approximately ten seconds after the electric parking brake has been applied or released. It then goes o ...
G WARNING Driving with the message Check Brake Fluid Level displayed can result in an accident. Have your brake system checked immediately. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. You can be seriously burn ...
Display messages Possible causes/consequences and M Solutions PRE-SAFE Functions Currently Limited See Operator's Manual G Risk of accident PRE-SAFE ® Brake is temporarily inoperative. Possible causes are: R the DISTRONIC PLUS cover in the radiator grill is dirty. R function is impaired due to heavy rain or snow. R the sensors in the bumpers ...
Display messages Possible causes/consequences and M Solutions 6 Rear Left SRS Malfunction Service Required or Rear Right SRS Malfunction Service Required G Risk of injury SRS has malfunctioned at the rear on the left or right. The 6 warning lamp also lights up in the instrument cluster. X Visit a qualified specialist workshop. 6 Left Side Cu ...
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Oper. Manual The front-passenger air bag is enabled during the journey, even though: R a child, a small adult or an object weighing less than the system's weight threshold is located on the front-passenger seat. R the front-passenger seat is unoccu ...
G WARNING If the 42 indicator lamp remains off even after performing the above corrective steps, do not have any children twelve years old and under and other small individuals use the front-passenger seat until the system has been repaired. Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Oper. Manu ...
Lights i Display messages about LEDs: This display message will only appear if all LEDs have failed. Display messages Possible causes/consequences and M Solutions b Check Left Cornering Light or Check Right Cornering Light The left or right-hand cornering light is defective. X Check whether you are permitted to change the bulb yourself ( Y page 254 ...
Display messages Possible causes/consequences and M Solutions b Check Center Brake Lamp The high-mounted brake lamp is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 254). or X Visit a qualified specialist workshop. b Check Left Tail and Brake Lamp or Check Right Tail and Brake Lamp The left or right-hand tail lamp/b ...
Display messages Possible causes/consequences and M Solutions b Check Left Reverse Lamp or Check Right Reverse Lamp The left or right-hand backup lamp is defective. X Check whether you are permitted to change the bulb yourself ( Y page 254). or X Visit a qualified specialist workshop. b Check Front Left Sidemarker Lamp or Check Front Right Sidemark ...
Display messages Possible causes/consequences and M Solutions b Please Switch Off Lights The lights are still switched on when you leave the vehicle. A warning tone also sounds. X Turn the light switch to $ or c . or X If the rear fog lamp is switched on: press the light switch in to the stop. Adaptive High-beam Assist Inoperative Adaptive Highbeam ...
G WARNING Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Stop the ve ...
Display messages Possible causes/consequences and M Solutions 4 Check Engine Oil At Next Refueling Vehicles with an oil dipstick: the oil level has dropped to the minimum level. X Check the oil level when next refueling, at the latest ( Y page 413). X If necessary, add engine oil ( Y page 415). X Have the engine checked at a qualified specialist wo ...
Display messages Possible causes/consequences and M Solutions 8 Reserve Fuel The fuel level has dropped into the reserve range. X Refuel at the nearest gas station. C There is only a very small amount of fuel in the fuel tank. X Refuel at the nearest gas station without fail. 8 Gas Cap Loose The fuel system pressure is too low. The fuel filler cap ...
Display messages Possible causes/consequences and M Solutions Á Night View Assist Lights Must Be Set to AUTO or ON A condition for activating Night View Assist Plus has not been fulfilled. X Turn the light switch to c or L . Á Night View Assist Not In Reverse Gear A condition for activating Night View Assist Plus has not been fulfilled. X Shift t ...
Display messages Possible causes/consequences and M Solutions G Risk of accident AIRMATIC is defective. A warning tone also sounds. X Do not drive faster than 50 mph (80km/h). X Make only slight steering movements. Otherwise, the front fender or the tires could be damaged if the steering movement is too large. X Listen for scraping sounds. X Pull o ...
Display messages Possible causes/consequences and M Solutions ABC Vehicle Rising Please Wait Briefly The ABC vehicle level is too low when the vehicle is stationary. X Do not pull away. The vehicle level is set when the display message disappears. ABC Malfunction The ABC function is restricted. The vehicle's handling characteristics may be aff ...
Display messages Possible causes/consequences and M Solutions Active Blind Spot Assist Currently Unavailable See Oper. Manual Active Blind Spot Assist is temporarily inoperative. Possible causes are: R the sensors are dirty. R function is impaired due to heavy rain or snow. R the radar sensor system is outside the operating temperature range. R the ...
Display messages Possible causes/consequences and M Solutions Parking Guidance Canceled Parking Guidance is deactivated. Possible causes are: R the vehicle is skidding. R the sensors are dirty. R a malfunction has occurred. X Reactivate Parking Guidance later ( Y page 313). If the parking space symbol is not displayed in the multifunction display w ...
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS Currently Unavailable See Oper. Manual DISTRONIC is deactivated and temporarily inoperative. Possible causes are: R the DISTRONIC PLUS cover in the radiator grill is dirty. R function is impaired due to heavy rain or snow. R the sensors in the bumpers are dirty. R the rada ...
Display messages Possible causes/consequences and M Solutions Cruise Control Inoperative Cruise control is defective. A warning tone also sounds. X Visit a qualified specialist workshop. Cruise Control --- mph A condition for activating cruise control has not been fulfilled. You have tried to store a speed below 20 mph (30 km/h), for example. X If ...
Display messages Possible causes/consequences and M Solutions Check Tires G Risk of accident The tire pressure in one or more tires has dropped significantly. The wheel position is displayed in the multifunction display. A warning tone also sounds. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traf ...
Display messages Possible causes/consequences and M Solutions h Check Tire Pressure G Risk of accident The tire pressure in one or more tires has dropped significantly. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so. X If necessary, change a wheel ( Y page 469). X Che ...
Display messages Possible causes/consequences and M Solutions Service Required Do Not Shift Gears You cannot change the transmission position due to a malfunction. A warning tone also sounds. If transmission position D is selected: X Drive to a qualified specialist workshop without shifting the transmission from position D . If transmission positio ...
Display messages Possible causes/consequences and M Solutions D Power Steering Malfunction See Oper. Manual G Risk of accident The power steering is malfunctioning. You will need to use more force to steer. X Check whether you are able to apply the extra force required. X If you are able to steer safely: carefully drive on to a qualified specialist ...
Display messages Possible causes/consequences and M Solutions  Key Not Detected (Red display message) The KEYLESS-GO key is not in the vehicle. A warning tone also sounds. If the engine is switched off, you can no longer lock the vehicle centrally or start the engine. X Pull over and stop the vehicle safely as soon as possible, paying attention t ...
Warning and indicator lamps in the instrument cluster Seat belts Problem Possible causes/consequences and M Solutions 7 After starting the engine, the red seat belt warning lamp lights up for six seconds. The seat belt warning lamp reminds the driver and front passenger to fasten their seat belts. X Fasten your seat belt ( Y page 55). 7 After start ...
Problem Possible causes/consequences and M Solutions 7 The red seat belt warning lamp flashes and an intermittent audible warning sounds. G Risk of injury The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h ) or you have briefly driven faster than 15 mph (25 km/h). X Fasten your s ...
Problem Possible causes/consequences and M Solutions ! The yellow ABS warning lamp is lit while the engine is running. G Risk of accident ABS (Anti-lock Brake System) is deactivated due to a malfunction. BAS (Brake Assist), BAS PLUS, ESP ® (Electronic Stability Program), PRE-SAFE ® , PRE-SAFE ® Brake, the HOLD function and hill start assist are ...
Problem Possible causes/consequences and M Solutions ! The yellow ABS warning lamp is lit while the engine is running. A warning tone also sounds. G Risk of accident EBD is faulty. Therefore, ABS, BAS, BAS PLUS, ESP ® , PRE-SAFE ® , PRE-SAFE ® Brake, the HOLD function and hill start assist are also unavailable, for example. The brake system cont ...
Problem Possible causes/consequences and M Solutions å The yellow ESP ® OFF warning lamp is lit while the engine is running. G Risk of accident ESP ® is deactivated. ESP ® will not stabilize the vehicle if it starts to skid or if a wheel starts to spin. X Reactivate ESP ® . For exceptions: ( Y page 67). X Adapt your driving style to suit the r ...
Problem Possible causes/consequences and M Solutions ÷å The yellow ESP ® and ESP ® OFF warning lamps are lit while the engine is running. G Risk of accident ESP ® , BAS, PRE-SAFE ® , the HOLD function and hill start assist are temporarily unavailable. BAS PLUS and PRE-SAFE ® Brake may also have failed. ESP ® will not stabilize the vehicle i ...
G WARNING In the event a malfunction of the SRS is indicated as outlined above, the SRS may not be operational. For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal i ...
Driving systems Problem Possible causes/consequences and M Solutions · The red distance warning lamp lights up while the vehicle is in motion. A warning tone also sounds. G Risk of accident You are approaching a vehicle or a stationary obstacle in your line of travel at too high a speed. X Be prepared to brake immediately. X Pay careful attention ...
the Tire and Loading Information placard or, if available, the tire pressure label, you should determine the proper tire pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure indicator lamp when one or more of your tires are significant ...
Useful information ............................ 392 Loading guidelines ............................ 392 Stowage areas .................................. 392 Features ............................................. 395 391 Stowage and features ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
a remote control (see the COMAND section in this Operator's Manual). i The glove box can be ventilated ( Y page 267). X To open: press button : . X To close: fold the glove box flap upwards until it engages. The glove box can only be locked and unlocked using the mechanical key. 1 Glove box unlocked 2 Glove box locked Eyeglasses compartment X ...
X To open: fold down the seat armrest. X Pull handle : and fold the armrests upwards. Stowage box between the rear seats X To open: pull handle : backwards in the direction of the arrow. Stowage box in the rear seat backrest ! Do not sit or lean your bodyweight on the armrests when they are folded out as you could damage them. X To open: fold down ...
Bag hook ! The bag hook can bear a maximum load of 6.6lbs (3kg) and should not be used to secure a load. X Pull bag hook ; down by tab : . Stowage well under the trunk floor : Stowage well ; Hook = Trunk floor cover X Attach trunk floor cover = to the upper edge of the trunk with hooks ; . Features Cup holders Important safety notes G WARNING In or ...
X To open: press marking : . X To remove: pull the cup holder upwards in the direction of the arrow by silver handle ; . X To insert: press down until it engages. Observe the installation position indicated by "Front". Cup holder in the rear seat armrest ! Do not sit on or support your body weight on the rear seat armrest when it is folde ...
Rear window roller sunblind Important safety notes G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle. A child's ...
X To re-install the insert: press insert = into the holder until it engages. X To close: press cover : briefly at the front. The cover moves back. Cigarette lighter G WARNING When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the ve ...
Socket in the glove box X Open the glove box ( Y page 392). X Lift up the cover of socket : . Socket in the trunk X Lift up the cover of socket : . mbrace Important safety notes ! A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the E MB Info call button to reg ...
You can find further information and a description of all available features under "Owners Online" at http:// www.mbusa.com 17 . System self-test After you have switched on the ignition, the system carries out a self-diagnosis. G WARNING A malfunction in the system has been detected if one of the following conditions occurs: R the indicat ...
All important information on the emergency is transmitted, for example: R current location of the vehicle (as determined by the GPS system) R vehicle identification number R information on the type of emergency i If the Emergency Call Activated message appears in the COMAND display, you cannot use other COMAND functions. Shortly after the emergency ...
X Press and hold Roadside Assistance button : for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assistance button : flashes while the call is active. The Connecting Call message appears in the multifunction display and the COMAND display. The audio output is muted. If a ...
the connection is being established. The Connecting Call message appears in the multifunction display. The COMAND display shows the Information Call Activated message. The audio output is muted. If a connection can be established, the Call Connected message appears in the multifunction display. The COMAND display shows the Information Call Activate ...
(POIs)/important destinations in the surrounding area. You are prompted to confirm route guidance to the address entered. X Slide XVY and turn cVd the COMAND controller to select Yes and confirm by pressing W . The system calculates the route and subsequently starts the route guidance with the address entered. i If you select No , the address can b ...
Each destination address sent can be accessed by every vehicle which is connected with the relevant e-mail address. Vehicle remote opening If you have unintentionally locked your vehicle (e.g. the SmartKey is still in the vehicle) and a replacement SmartKey is not available, the vehicle can be opened by a Mercedes-Benz Customer Assistance Center. T ...
happens automatically and does not require any action from the driver. This function allows the Mercedes-Benz Center to improve appointment planning significantly and ensures that your vehicle receives the best service possible. i The "Automatic retrieval of vehicle data for the service due date" function is only available if the relevant ...
1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. FCC ID: CB2HMIHL4 i Canada only: This device complies with RSS-210 of Indu ...
X Press and hold button B on remote control A until indicator lamp : lights up green. If indicator lamp : lights up green or flashes, then programming has been successful. X Release button B on remote control A for the garage door drive system. If indicator lamp : lights up red: X Repeat the programming procedure for the corresponding button on the ...
The integrated garage door opener is compatible with devices that have units which operate in the frequency range of 280 to 390MHz. R Replace the batteries in garage door remote control A . This increases the likelihood that garage door remote control A will transmit a strong and precise signal to the integrated garage door opener in the rear-view ...
X Slide the seat backwards. X To install: place the floormat in the footwell. X Press studs : onto retainers ; . X To remove: pull the floormat off retainers ; . X Remove the floormat. Infrared reflective windshield The infrared reflecting glass prevents the vehicle interior from becoming too hot. It also blocks radio waves up into the gigahertz ra ...
Useful information ............................ 412 Engine compartment ........................ 412 Maintenance ...................................... 418 Care .................................................... 419 411 Maintenance and care ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
X Pull release lever : for the hood. The hood is released. ! Make sure that the windshield wipers are not folded away from the windshield. You could otherwise damage the windshield wipers or the hood. X Reach into the gap, pull hood catch handle ; up and lift the hood. Once you have lifted the hood about 15 inches (40cm), it is automatically opened ...
X Slowly slide oil dipstick : into the guide tube to the stop, and take it out again. If the level is between MIN mark = and MAX mark ; , the oil level is correct. X If the oil level is at or below MIN mark = , add 0.55 US qt to 1.1 US qt(0.5 to 1.0 l) of engine oil. Checking the oil level using the on- board computer Measurement X Make sure that t ...
Display messages The measurement takes a few seconds. You will see one of the following messages in the multifunction display: Problem Possible causes/consequences and M Solutions Engine Oil Level OK The oil level is correct. Add 1.0 l Engine Oil At Next Refueling . The oil level is too low. X add 1.0 l of engine oil. Add 1.5 l Engine Oil At Next R ...
H Environmental note When adding oil, take care not to spill any. If oil enters the soil or waterways, it is harmful to the environment. ! Only use engine oils and oil filters that have been approved for vehicles with a service system. You can obtain a list of the engine oils and oil filters tested and approved in accordance with the Mercedes-Benz ...
X Park the vehicle on a level surface. Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. X Turn the SmartKey to position 2 in the ignition lock ( Y page 271). On vehicles with KEYLESS-GO, press the Start/Stop button twice ( Y page 271). X Check the coolant temperature display in the instrument clust ...
If the brake fluid level is between MIN marking ; and MAX marking : on the brake fluid reservoir, it is correct. Maintenance Service interval display Service messages Information on the type of service and service intervals (see separate Maintenance Booklet). You can obtain further information from an authorized Mercedes-Benz Center or at http://ww ...
otherwise lead to increased wear and damage to the major assemblies or the vehicle. Driving abroad An extensive Mercedes-Benz Service network is also available in other countries. You can obtain further information from any authorized Mercedes-Benz Center. Care Notes on care Regular care of your vehicle is a condition for retaining the quality in t ...
R Vehicles with a SmartKey: Do not remove the SmartKey from the ignition lock. Do not open the driver's door or front-passenger door when the engine is switched off. Otherwise, the automatic transmission selects park position P automatically and locks the wheels. You can prevent this by shifting the automatic transmission to N beforehand. R Ve ...
R connectors R lights R seals R trim R ventilation slots Damaged seals or electrical components can lead to leaks or failures. Cleaning the wheels ! Do not use acidic wheel cleaning products to remove brake dust. This could damage wheel bolts and brake components. ! Do not park the vehicle for an extended period straight after cleaning it, particul ...
high-gloss surfaces. Their use on vehicles with matte finish leads to considerable surface damage (shiny, spotted areas). Always have paintwork repairs carried out at a qualified specialist workshop. ! Do not use wash programs with a hot wax treatment under any circumstances. i The vehicle should preferably be washed by hand using a soft sponge, ca ...
shampoo. Or clean the exterior lighting with cleaning cloths. Cleaning the mirror turn signals ! Only use cleaning agents or cleaning cloths that are suitable for plastic lenses. Unsuitable cleaning agents or cleaning cloths could scratch or damage the plastic lenses of the mirror turn signals. X Clean the plastic lenses of the mirror turn signals ...
! For cleaning, do not use any of the following: R alcohol-based thinner or gasoline R abrasive cleaning agents R commercially-available household cleaning agents These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display. Cleaning Night View Assist Plus ! Nev ...
Cleaning the steering wheel and gear or selector lever X Thoroughly wipe with a damp cloth or use leather care agents that have been recommended and approved by Mercedes- Benz. Cleaning genuine wood and trim elements X Wipe the wooden trim and trim pieces with a damp, lint-free cloth, e.g. a microfiber cloth. X Heavy soiling: use car care and clean ...
426 ...
Useful information ............................ 428 Where will I find...? ........................... 428 Flat tire .............................................. 429 Battery ............................................... 434 Jump-starting .................................... 437 Towing and tow-starting .................. 438 Fuses ............... ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
Flat tire Preparing the vehicle i Vehicle preparation is not necessary on vehicles with MOExtended tires. X Stop the vehicle on solid, non-slippery and level ground, as far away as possible from traffic. X Switch on the hazard warning lamps. X Apply the electric parking brake manually ( Y page 288). X Bring the front wheels into the straight- ahead ...
R folding wheel chock R jack X Secure the vehicle to prevent it from rolling away. Securing the vehicle to prevent it from rolling away If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit ( Y page 428). The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example ...
and inserting wheel chocks. Never disengage the parking brake while the vehicle is raised. R the jack must be placed on a firm, flat and non-slip surface. On a loose surface, a large, load-bearing underlay must be used. On a slippery surface, a non-slip underlay must be used, e.g. rubber mats. R do not use wooden blocks or similar objects as a jack ...
Removing a wheel X Unscrew the uppermost wheel bolt completely. X Screw alignment bolt : into the thread instead of the wheel bolt. X Unscrew the remaining wheel bolts fully. ! Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in. X Remove the wheel. Mounting a new ...
X Slide the emergency spare wheel onto the alignment bolt and push it on. X Tighten the wheel bolts until they are finger-tight. X Unscrew the alignment bolt. X Tighten the last wheel bolt until it is finger- tight. Lowering the vehicle G WARNING Tire pressure that is too high or too low can lead to a blowout of the mounted emergency spare wheel/sp ...
MOExtended tires may only be used in conjunction with the activated tire pressure loss warning system or with the activated tire pressure monitoring system. The driving distance in partially laden condition is approximately 50 miles (80 km), and approximately 18 miles (30 km) when fully loaded. In addition to the vehicle load, the driving distance ...
Immediately rinse acid splashes off with clean water. Consult a doctor if necessary. Wear eye protection. Keep children away. Observe this Operator's Manual. H Environmental note Batteries contain dangerous substances. It is against the law to dispose of them with the household rubbish. They must be collected separately and recycled to protect ...
Mercedes-Benz recommends that you do not carry out work on batteries yourself, e.g. removing or charging. Have this work performed at a qualified specialist workshop. Charging the battery G WARNING Never charge a battery still installed in the vehicle unless a battery charger unit approved by Mercedes-Benz is being used. Gases may escape during cha ...
Jump-starting G WARNING Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, ski ...
Position number A identifies the charged battery of the other vehicle or an equivalent jump- starting device. X Remove the cover from positive terminal : . X Connect positive terminal : on your vehicle to positive terminal ; of donor battery A using the jumper cable, beginning with your own battery. X Start the engine of the donor vehicle and run i ...
engine is not running. You will need more force to steer and brake, you may have to depress the brake pedal with maximum force. Before towing away, make sure that the steering can be moved and is not locked. If you tow or tow-start another vehicle, its weight must not exceed the maximum permissible gross vehicle weight of your vehicle. It is better ...
X Press the mark on cover : inwards in the direction of the arrow. X Take cover : off the opening. X Screw the towing eye in clockwise to the stop and tighten it. Removing the towing eye X Loosen the towing eye and unscrew it. X Attach cover : to the bumper and press until it engages. X Place the towing eye in the vehicle tool kit. Towing the vehic ...
As soon as the vehicle is loaded: X Prevent the vehicle from rolling away by applying the electric parking brake. X Shift the automatic transmission to position P . X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey from the ignition lock. X Secure the vehicle. ! Only lash the vehicle down by the wheels or wheel rims, no ...
R fuse box in the engine compartment on the left-hand side of the vehicle, when viewed in the direction of travel R fuse box in the engine compartment on the right-hand side of the vehicle, when viewed in the direction of travel The fuse allocation chart is in the vehicle document wallet. Dashboard fuse box There is a fuse box located on both the d ...
X Remove any existing moisture from the fuse box using a dry cloth. X AMG vehicles: remove the control unit above the fuse box. X To open: undo screws : with an Allen key. X Remove bracket = . X Remove cover ; . X To close: check whether the rubber seal is lying correctly in cover ; . X Put cover ; back in position. X Replace bracket = . X Tighten ...
444 ...
Useful information ............................ 446 Important safety notes .................... 446 Operation ........................................... 446 Winter operation ............................... 448 Tire pressure ..................................... 449 Loading the vehicle .......................... 456 Maximum load rating ............ ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
Notes on regularly inspecting wheels and tires G WARNING Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. There is a risk of accident. Check the tires regularly for signs of damage and replace any damaged tires immediately. R Regularly check the wheels and tires of your vehicle for damage (e ...
R Do not drive with tires which have too little tread depth, as this significantly reduces the traction on wet roads (hydroplaning). R Replace the tires after six years at the latest, regardless of wear. This also applies to the spare wheel/emergency spare wheel. The service life of tires depends on the following factors amongst other things: R dri ...
Mounting an emergency spare wheel may severely impair the driving characteristics. There is a risk of an accident. To avoid hazardous situations: R adapt your driving style accordingly and drive carefully. R never install more than one spare wheel or emergency spare wheel that differs in size. R only use a spare wheel or emergency spare wheel of a ...
Follow recommended tire inflation pressures and check the pressure of all the tires including the spare wheel: R monthly, at least R if the load changes R before beginning a long journey R under different operating conditions, e.g. off-road driving If necessary, correct the tire pressure. The recommended tire pressures for the tires mounted at the ...
and can be found on the tire sidewall ( Y page 463). If the tire pressures have been set to the lower values for lighter loads and/or lower road speeds, the pressures should be reset to the higher values: R if you want to drive with an increased load and/or R if you want to drive at higher road speeds. i The tire pressures for increased loads and/o ...
changes by 18 ‡ (10 †), the tire pressure changes by approximately 10 kPa (0.1 bar/ 1.5 psi). Take this into account when checking the pressure of warm tires and only correct the tire pressure if it is too low for the current operating conditions. If you check the tire pressure when the tires are warm, the resulting value will be higher than if ...
Checking the tire pressures Important safety notes Observe the "Tire pressure information" section ( Y page 449). Information on air pressure for the tires on your vehicle can be found: R on the vehicle's Tire and Loading Information placard on the B-pillar R on the tire pressure label on the fuel filler flap R in the "Tire pres ...
recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver's door B-pillar or the tire pressure label on the inside of the fuel filler flap. If your vehicle has tires of a different size than the size indicated on the Tire and Loading Information placard or the tire pressure label, you should determine th ...
2. this device must accept any interference received, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditi ...
you can also define reference values manually as described here. Restart the tire pressure monitor after you have set the tire pressure to the value recommended for the desired driving situation ( Y page 449). Only correct tire pressures on cold tires. Comply with the recommended tire pressures on the Tire and Loading Information placard the B-pill ...
: B-pillar, driver's side Maximum permissible load i The specifications shown on the Tire and Loading Information placard in the illustration are examples. The maximum permissible load is vehicle-specific and may deviate from the data shown here. The maximum permissible load that applies for your vehicle can be found on your vehicle's Tir ...
X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1 400 - 750 (5 x 150) = 650 lbs). X Step 5: Determine the combined we ...
Example: steps 1 to 3 The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load limit of 1 500 lbs (680 kg). This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle state ...
Example 1 Example 2 Example 3 Step 3 Permissible load and trailer load/ noseweight (maximum permissible load rating from the Tire and Loading Information placard minus the gross weight of all occupants) 1500 lbs (680 kg) - 750 lbs (340 kg) = 750 lbs (340 kg) 1500 lbs (680 kg) - 540 lbs (245 kg) = 960 lbs (435 kg) 1500 lbs (680 kg) - 150 lbs (68 kg) ...
i The actual values for tires are vehicle- specific and may deviate from the values in the illustration. Maximum tire load : is the maximum permissible weight for which the tire is approved. Uniform Tire Quality Grading Standards Overview of Tire Quality Grading Standards Uniform Tire Quality Grading Standards are U.S. government specifications. Th ...
specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. The safe speed on a wet, snow covered or icy road is always lower than on dry road surfaces. You should pay special attention to road conditions when temperatures are around the freezing point. Mercedes-Benz recommends a minimum tread dep ...
Tire size designation, load-bearing capacity and speed rating : Tire width ; Nominal aspect ratio in % = Tire code ? Rim diameter A Load bearing index B Speed rating i Tire data is vehicle-specific and may deviate from the data in the example. General: depending on the manufacturer's standards, the size imprinted in the tire wall may not conta ...
adapt your driving style to the traffic conditions. Summer tires Index Speed rating Q up to 100mph (160 km/h) R up to 106mph (170 km/h) S up to 112mph (180 km/h) T up to 118mph (190 km/h) H up to 130mph (210 km/h) V up to 149mph (240 km/h) W up to 168mph (270 km/h) Y up to 186mph (300 km/h) ZR...Y up to 186mph (300 km/h) ZR...(..Y) over 186mph (300 ...
Make sure that your tires have the required speed rating for your vehicle as specified in the "Tires" section ( Y page 469), e.g. if you buy new tires. Further information about reading tire data can be obtained from any qualified specialist workshop. Load index i Tire data is vehicle-specific and may deviate from the data in the example. ...
Tire characteristics i Tire data is vehicle-specific and may deviate from the data in the example. This information describes the tire cord and the number of layers in sidewall : and under the tread ; . Definition of terms for tires and loading Tire ply composition and material used Describes the number of plies or the number of layers of rubber-co ...
GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle load. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identification plate on the B-pillar on the driver's side. Speed rating The speed rating is part of the tire identification. It specif ...
Aspect ratio Relationship between tire height and tire width in percent. Tire pressure This is pressure inside the tire applying an outward force to each square inch of the tire's surface. The tire pressure is specified in pounds per square inch (psi), in kilopascal (kPa) or in bar. The tire pressure should only be corrected when the tires are ...
Changing a wheel Flat tire The "Breakdown assistance" section ( Y page 429) contains information and notes on how to deal with a flat tire. It also provides instructions on changing a wheel or mounting the spare wheel/emergency spare wheel. Interchanging the wheels G WARNING Interchanging the front and rear wheels may severely impair the ...
Mercedes-Benz specifically for your vehicle. These tires have been specially adapted for use with the control systems, such as ABS or ESP ® , and are marked as follows: R MO = Mercedes-Benz Original R MOE = Mercedes-Benz Original Extended (tires featuring run-flat characteristics) R MO1 = Mercedes-Benz Original (only certain AMG tires) Mercedes-Be ...
i Not all wheel and tire combinations are available at the factory for all countries. Wheel and tire combinations 471 Wheels and tires Z ...
Tires Summer tires Alloy wheels V1 V2 V3 V4 BA 255/45 R18 99 Y MOExtended 23 8.5 J x 18 H2 Wheel offset: 1.69 in (43 mm) # ——— FA RA 255/45 R18 99 Y MOExtended 23 275/45 R18 103 Y MOExtended 23, 24 8.5 J x 18 H2 Wheel offset: 1.69 in (43 mm) 9.5 J x 18 H2 Wheel offset: 1.69 in (43 mm) — # — — BA 255/40 R19 100 Y XL 8.5 J x 19 H2 Wheel o ...
All-weather tires Alloy wheels V1 V2 V3 V4 BA 255/40 R19 100 V XL M+S 8.5 J x 19 H2 Wheel offset: 1.69 in (43 mm) # # — — FA RA 255/40 R19 100 V XL M+S 275/40 R19 101 V M+S 24 8.5 J x 19 H2 Wheel offset: 1.69 in (43 mm) 9.5 J x 19 H2 Wheel offset: 1.69 in (43 mm) — # — — Winter tires Alloy wheels V1 V2 V3 V4 BA 255/45 R18 99 V M+S i 8.5 J ...
474 ...
Useful information ............................ 476 Notes on technical data ................... 476 Genuine Mercedes-Benz parts ......... 476 Warranty ............................................ 477 Identification plates ......................... 477 Service products and filling capaci- ties ..................................................... 47 ...
Useful information i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- relat ...
Warranty The Service and Warranty Information booklet contains detailed information about the warranties covering your vehicle. Your authorized Mercedes-Benz Center will exchange or repair any defective parts originally installed in the vehicle in accordance with the terms of the following warranties: R New Vehicle Limited Warranty R Emission Syste ...
In addition to being stamped on the vehicle identification plate, the vehicle identification number (VIN) is also stamped onto the vehicle body. It is under the trim behind the rear seat armrest. X Fold down the rear seat armrest. X Open the trim. You will see vehicle identification number (VIN) : . Engine number (AMG vehicles) : Emission control i ...
R windshield washer fluid R climate control system refrigerant Components and service products must be matched. You should therefore only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at an authorized Mercedes- Benz Center or on the Internet at http://bevo.mercedes-benz ...
R if the vehicle is carrying a light load, e.g. two passengers without luggage, do not allow the engine to rev above 3000 rpm. R if the vehicle is fully loaded or is being operated in mountainous terrain, do not depress the accelerator pedal further than Ô of the pedal travel. Only refuel with premium-grade unleaded gasoline with a minimum octane ...
intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment. Follow the instructions in the service interval display regarding the oil change. Otherwise, you may damage the engine and the exhaust gas aftertreatment. The engine oils are matched to the performance of Mercedes-Benz engines and s ...
Brake fluid G WARNING Over a period of time, the brake fluid absorbs moisture from the air; this lowers its boiling point. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving downhill). This would impair braking efficiency. You should have the brake fluid ...
Capacity Model Capacity CL 550 4MATIC 30 Approx. 14.5 US qt (13.7 l) CL 600 Approx. 15.3 US qt (14.5 l) CL 63 AMG Approx. 12.2 US qt (11.5 l) CL 65 AMG Approx. 14.7 US qt (13.9 l) i Use MB 325.0 or MB 326.0 corrosion inhibitor/antifreeze. Washer fluid G WARNING Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze o ...
All models (except AMG vehicles) Vehicle length 200.8 in (5099 mm) Vehicle width including exterior mirrors 83.9 in ( 2130 mm) Vehicle height 55.9 in ( 1419 mm) Wheelbase 116.3 in (2955 mm) Turning radius 38.2 ft (11.63 m) Maximum trunk load 220 lb (100 kg) CL 63 AMG Vehicle length 201.2 in (5111 mm) Vehicle width including exterior mirrors 83.9 in ...
Publication details Internet Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only) Editorial office Not to be reprinted, translated or otherwise reproduced, in whole or in part, without the written permission of Daimler ...
Order no. 6515 2375 13 Part no. 216 584 15 82 Edition B 2012 É2165841582ÁËÍ 2165841582 ...
Mercedes-Benz CL-Class Coupe (2012)のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CL-Class Coupe (2012)の取扱説明書
- Mercedes-Benzの製品カード
- パンフレット
- またはMercedes-Benz CL-Class Coupe (2012)の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mercedes-Benz CL-Class Coupe (2012)の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Mercedes-Benz CL-Class Coupe (2012)の取り付け説明書、サービスマニュアル、簡易説明書、またはMercedes-Benz CL-Class Coupe (2012)のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mercedes-Benz CL-Class Coupe (2012)の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Mercedes-Benz CL-Class Coupe (2012)デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMercedes-Benz CL-Class Coupe (2012)を使用するのを助ける技術的文書のことです。説明書は通常、全てのMercedes-Benz CL-Class Coupe (2012)ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Mercedes-Benzの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Mercedes-Benz CL-Class Coupe (2012)の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMercedes-Benz CL-Class Coupe (2012)の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mercedes-Benz CL-Class Coupe (2012)に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mercedes-Benz CL-Class Coupe (2012)デバイスの基本機能を使うにあたってのヒント。 Mercedes-Benz CL-Class Coupe (2012)のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mercedes-Benz CL-Class Coupe (2012)に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMercedes-Benz CL-Class Coupe (2012)のメーカー/サービスへの連絡先に関する情報。
Mercedes-Benz CL-Class Coupe (2012)についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもMercedes-Benz CL-Class Coupe (2012)の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMercedes-Benz CL-Class Coupe (2012)で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。