Philips VR458の取扱説明書

26ページ 0.76 mb
ダウンロード

ページに移動 of 26

Summary
  • Philips VR458 - page 1

    1. HOW TO CONNECT YOUR VIDEO RECORDER 4 ......... How to connect your video recorder to the TV set 4 ..... Connecting with a scart cable 4 ...................... Connecting without a scart cable 5 ................... Connecting a decoder or other equipment 5 ............ 2. INSTALLING YOUR VIDEO RECORDER 6 ............... Initial installation 6 ... ...

  • Philips VR458 - page 2

    The remote control TV To call up additional TV functions : Additional TV functions for TV sets with the same remote control code (RC5) TV/STANDBY m Switch off : To switch off set, interrupt menu function, interrupt a programmed recording (TIMER) CHILD LOCK u No function EJECT J Eject : To eject a cassette MONITOR TV monitor : To switch between TV r ...

  • Philips VR458 - page 3

    Front of the set STANDBY m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER) RECORD n Record : To record the programme selected PROGRAMME r Select : One line or programme number down. PROGRAMME q Select : One line or programme number up. STOP/EJECT ? Pause/Stop, eject cassette : To stop the tape and eject the c ...

  • Philips VR458 - page 4

    Acura 02 GoldStar 15, 20, 27 Proline 31 Adyson 20 Goodmans 07, 10, 20, 29, 36 Protech 02, 12, 20, 23, 25, 38 Akai 18, 33 Gorenje 35 Quelle 03, 04, 33 Akura 21, 25 Graetz 33 Questa 07 Alba 02, 07, 21 Granada 10, 18, 20 Rank Arena 07 Allorgan 28 Grandin 26 Rediffusion 33 Amplivision 20 Grundig 17 Rex 25 Amstrad 02 HCM 02, 26 Roadstar 02, 21, 25, 38 A ...

  • Philips VR458 - page 5

    Congratulations! You now own one of the most sophisticated and simple-to-use video recorders (VCR) on the market. With this VCR you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your video recorder. Safety instructions and other notes A Danger: High voltage! Do not remove the top cover a ...

  • Philips VR458 - page 6

    Special functions on your video recorder Philips has developed a system which produces the best possible playback quality. It reduces disturbance on old, worn video cassettes, and emphasises the detail on very good quality cassettes. When you connect your video recorder to your television and plug it into the mains, you will be welcomed with an OSD ...

  • Philips VR458 - page 7

    How to connect your video recorder to the TV set We recommend the use of a scart cable. This will give you the best picture and sound quality. When you install your video recorder for the first time, please read: E If your TV set has a scart socket and you are using a scart cable, please read the section ’Connecting with a scart cable’. E The s ...

  • Philips VR458 - page 8

    Connecting without a scart cable a Switch off the TV set. b Remove the aerial cable plug from your TV set and insert it into the 2 socket at the back of the video recorder. c Plug one end of the aerial cable provided into the 3 socket on the video recorder and the other end into the aerial input socket on your TV set. d Insert one end of the mains ...

  • Philips VR458 - page 9

    Initial installation a Open up the battery compartment of your remote control and place the batteries in it as shown in the picture. b Close the battery compartment. c Confirm the picture on the TV screen with the OK button on the remote control. d Select the language for the on-screen display (OSD) with the P r or P q button. The display on the vi ...

  • Philips VR458 - page 10

    Allocating a decoder Some TV stations will send coded TV channels, that you can only watch when you use a decoder. You can connect such a decoder (descrambler) to your video recorder. With the following function, the connected decoder will automatically be activated for the TV programme you want to watch. a Switch on the TV set. If required, select ...

  • Philips VR458 - page 11

    Channel number or frequency display You can switch between the display for ’channel number’ or ’frequency’ for manual channel search. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button on the remote control. The main menu will appear. c Select the line ’ CHANNEL/FREQUENCY ’ w ...

  • Philips VR458 - page 12

    Automatic TV channel search The video recorder will search for all TV channels. If you want to start the automatic TV channel search again, then follow the instructions below. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button on the remote control. The main menu will appear. c Select th ...

  • Philips VR458 - page 13

    Setting the language You can select the language for the on-screen display (OSD). The small display on the video recorder will only show english text. a Switch on the TV set. If required, select the programme number for the video recorder. b Press the MENU button on the remote control. The main menu will appear. c Select the line ’ LANGUAGE ’ a ...

  • Philips VR458 - page 14

    General information D You can switch on with the STOP h button, the 0-9 buttons or by putting in a cassette. D If you do not use the video recorder for a few minutes, it will switch to standby automatically. Please read the section ’Automatic switch-off (tuner mode)’ in chapter ADDITIONAL FUNCTIONS. D If you have switched the video recorder off ...

  • Philips VR458 - page 15

    Summary of user guide The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. CLOCK OSD CHANNEL ALLOCATION CHANNEL/FREQUENCY MANUAL SEARCH AUTOSEARCH LANGUAGE FOLLOW TV DIRECT RECORD COUNTER ------------------------ -/+ OK MAIN MENU User guide (OSD) The OSD (On-screen display) shows the various fun ...

  • Philips VR458 - page 16

    Playing a cassette a Put a cassette into the cassette slot. ’ v ’ will appear on the display. b Press the PLAY G button. c To stop, press the STOP h button. d To eject the cassette, press the STOP/EJECT ? button on the video recorder. D Some functions switch off automatically after a while (for example, pause, still picture, picture search). Th ...

  • Philips VR458 - page 17

    Searching for tape position without the picture (wind and rewind) a Stop the tape with the STOP h button. b Press the [ (reverse) or I (forward) button. c To stop at a certain picture, press the STOP h button. Instant View With this function you can switch to picture search during wind and rewind. a If you hold the [ (rewind) or I (wind) button dur ...

  • Philips VR458 - page 18

    Use ’Manual Recording’ to make a spontaneous recording (for example, a programme currently being shown). E If you want to start and stop a recording manually, read the section: ’Recording without automatic switch-off’. E If you want to start a recording manually but have it stopped automatically, read the section: ’Recording with automati ...

  • Philips VR458 - page 19

    b With the video recorder switched on, and before you start recording , select the recording speed with the SP/LP, AV button. On the video recorder display you will see: ’ LP ’ : L ong P lay = half recording speed (double recording time). ’ SP ’ : S tandard P lay = normal recording speed. D The picture quality may suffer when you record at ...

  • Philips VR458 - page 20

    Use programmed recording to automatically start and stop a recording at a later date. To make a programmed recording, your video recorder needs to know: * the date you want to make the recording; * the programme number for the TV channel you want to record; * the start and stop time of the recording; * whether you want to use VPS or PDC The video r ...

  • Philips VR458 - page 21

    f Confirm with the OK button when the information is correct. D The programming information has been stored in a TIMER block. g Select the recording speed SP or LP with the SP/LP, AV button.. h Make sure that the cassette you have put in can be recorded on. i Switch off with the TV/STANDBY m button. The programmed recording will only function when ...

  • Philips VR458 - page 22

    D While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed recording, press the TV/STANDBY m button. D If the video recorder is switched on a few minutes before a programmed recording is supposed to begin, ’ TIMER RECORD ’ will flash on the TV screen. D If you reach the en ...

  • Philips VR458 - page 23

    Switching the TV system If you play recordings made on another video recorder or if you record from another source, this may lead to problems with the automatic TV system switch-over. You can switch off the automatic TV system switch-over as follows. a Select the TV system with the SYSTEM button before you start recording, or while you play a casse ...

  • Philips VR458 - page 24

    Reducing picture disturbance (’optimizing the modulator’) You may experience picture disturbance if you have not used a scart cable to connect your video recorder and TV. This is because another TV station in your reception area may already be using UHF-channel CH36 or 591MHz. a Make sure that there is no cassette in the video recorder. With th ...

  • Philips VR458 - page 25

    If, contrary to expectation, you have any problems using this video recorder, it may be caused by one of the reasons mentioned below. You can also call the customer service centre in your country. You will find the phone number in the enclosed guarantee leaflet. Your video recorder does not respond to any button being pressed: • There is no power ...

  • Philips VR458 - page 26

    Technical terms used Current tape position : The part of the tape currently being played. External source : A device connected via a socket (for example, scart socket) which is transmitting audio/video signals to the video recorder. Index marking : A marking which is automatically made on the tape at the beginning of every recording. This marking ( ...

メーカー Philips カテゴリー VCR

Philips VR458のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VR458の取扱説明書
- Philipsの製品カード
- パンフレット
- またはPhilips VR458の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Philips VR458の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Philips VR458の取り付け説明書、サービスマニュアル、簡易説明書、またはPhilips VR458のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Philips VR458の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Philips VR458デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPhilips VR458を使用するのを助ける技術的文書のことです。説明書は通常、全てのPhilips VR458ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Philipsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Philips VR458の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPhilips VR458の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Philips VR458に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Philips VR458デバイスの基本機能を使うにあたってのヒント。 Philips VR458のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Philips VR458に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPhilips VR458のメーカー/サービスへの連絡先に関する情報。

Philips VR458についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPhilips VR458の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPhilips VR458で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)