Sunbeam 3035の取扱説明書

40ページ 0.72 mb
ダウンロード

ページに移動 of 40

Summary
  • Sunbeam 3035 - page 1

    ...

  • Sunbeam 3035 - page 2

    When using your iron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USE. Use iron only for its intended use. To protect against risk of electric shock, do not immerse the iron in water or other liquids. The iron should always be turned to “OFF” before plugging or unplugging from outlet ...

  • Sunbeam 3035 - page 3

    . If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized serwce center. l Your SUNBEAMa iron is deslgned to rest on the heel rest. Do not leave the iron unattended. Do not set the iron on an unprotected surface, even if it is on its heel rest. SPECIAL INSTRUCTIONS l This is a 1200.Watt ap ...

  • Sunbeam 3035 - page 4

    Welcome......................................3 Learning About Your Iron.. . . . . . . . . . . . . . . . . . . . . . . .4 Filling the Water Reservoir . . . . . . . . . . . . . . .5 Extending the Power Cord . . . . . . . . . . . . . .6 Ironing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .: . . . . .7 Dry Ironing . . . . . . . . ...

  • Sunbeam 3035 - page 5

    Welcome Congratulations on your purchase of a SUNBEAM” Iron! Sunbeam has designed your iron to provide the utmost in quality, ease of use and convenience. SUNBEAM” Simple Pres9 irons offer the following features: . . . . . . . . . . . . SPRAY MIST - Provides a fine mist of water to dampen fabrics for creases or to remove wrinkles from heavy fab ...

  • Sunbeam 3035 - page 6

    1. SPRAY MIST Release 2. Sliding Water Reservoir Cover 3. Water Fill Hole 4. SHOT OF STEAM Button (Model 3040 only) 5. SPRAY MIST Button 6. Steam Control 7. Power Indicator Light 8. Patented MOTION SMART Auto-Off Indicator Blinking Light 9. Comfortable, Ergonomic Grip 1OA. Retractable Cord 10B. Winding Button 11. Heel Rest with Rubber Feet 12. Cord ...

  • Sunbeam 3035 - page 7

    Filling the Water Reservoir You must fill the water reservoir with water to use the SPRAY MIST8 and SHOT OF STEAM features and to get steam out of your iron Tip: Sunbeam tests each iron at the factory to ensure that they function correctly. The test may leave a small, harmless amount of water within the water reservoir. Before you fill the water re ...

  • Sunbeam 3035 - page 8

    Slide the water reservoir cover open and hold the iron at an angle. Fill the water reservoir with tap water until it reaches the maximum fill level (10 ounces). WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot metal parts, hot water and steam can cause injuries. Close the water reservoir cover. Extending the ...

  • Sunbeam 3035 - page 9

    Dry Ironing 1. Make sure that the Steam Control is set to OFF. 2. Plug the cord into a 102-Volt AC outlet. The Power Indicator will light. 3. Turn the Fabric Select dial to the Dry ironing fabric setting you desire (Silk or Synthetics) and allow the iron to heat for 2 minutes. While the Iron is heating, make sure it is sitting on its heel rest on a ...

  • Sunbeam 3035 - page 10

    9 I Jsivthees SPRAY MIST@ The SPRAY MIST” feature dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases. To use the SPRAY MIST feature: Press the SPRAY MIST’ button firmly, SHOT OF STEAM” (Model 3040 only) The SHOT OF STEAM” feature provides an extra burst of steam for deep penetration of stubborn wrinkle ...

  • Sunbeam 3035 - page 11

    Vertical Steam (Model 3040 only) The vertical steam feature allows your iron to function as a garment steamer. Tip: When using the vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. To use the vertical steam: 1. Make sure that the iron has heated up (2 minutes). 2. Ho ...

  • Sunbeam 3035 - page 12

    Patented MOTION SMART’” Auto-Off When the iron is plugged in, the Power Indicator will light steadily, indicating that there is power to the iron. If you leave the iron: . in a vertical position (on its heel rest) without moving it, the iron will automatically turn off after 15 minutes. The Power Indicator will blink to let you know that the ir ...

  • Sunbeam 3035 - page 13

    Turning Off Your Iron 1. Turn the Steam Control and Fabric Select dial to OFF. 2. Unplug the iron from the power source. WARNING: NEVER yank the power cord when ’ unplugging the iron, this can damage the cord. Storing Your Iron 1. 2. 3. 4.’ Allow the iron to cool. Hold the plug with one hand and press the winding button with the other hand to r ...

  • Sunbeam 3035 - page 14

    . . . lq Your Trnn I Cleaning the Soleplate Clean the soleplate if starch or other residue accum11latc. To clean the Soleplate: 1. Allow the iron to cool and then wipe it with a soft, damp cloth. WARNING: DO Not use abrasive cleansers, scouring pads or vinegar to clean the soleplate, this will damage the finish. 2. Run the iron over an all-cotton c ...

  • Sunbeam 3035 - page 15

    2. 3. 4. 5. 6. 7. Fill the water reservoir with tap water (10 oz.) and close the water reservoir cover. Plug the iron into a power outlet. The power indicator will light. Set the Fabric Select dial to Linen and allow the iron to heat for 2 minutes. Turn the Steam Control and the Fabric Select dial to OFF and unplug the iron. Hold the iron over a si ...

  • Sunbeam 3035 - page 16

    8. Turn the Steam Control to OFF. 9. Open the water reservoir cover, turn the iron upside down and allow the remaining water to flow out of the fill hole. 10. Dry the soleplate with a towel. 11. Plug in the iron and set the Fabric Select dial to Linen. Let the iron heat for 2 minutes to dry out the iron completely. 12. Set the Fabric Select dial to ...

  • Sunbeam 3035 - page 17

    Ironing Tips l Always read garment labels and follow the manufacturer’s ironing instructions. l Sort the articles to be ironed according to the type of fabric. . You should first iron garments requiring low temperature (e.g., silks and synthetics) to avoid damaging them with an iron that is too hot. l If you are unsure of the fabric content of th ...

  • Sunbeam 3035 - page 18

    Ironing Guide Fabric Steam Setting Fabric Setting Ironing Recommendations Acrylic DRY Acetate Dry Silk Dry Viscose Dry or Steam Silk Nylon Dry or Steam Polyester Dry or Steam Rayon Dry or Steam Wool Steam Wool Steam blends Cotton Steam blends Corduroy Steam Cotton Steam Linen Steam Denim Steam Synthetic Synthetic Silk Silk Iron garment Inside out w ...

  • Sunbeam 3035 - page 19

    . . Year Imuted Warranty Sunbeam Products, Inc. (“Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacemen ...

  • Sunbeam 3035 - page 20

    How to Obtain Warranty Service Take the product to an authorized Sunbeam service center. You may obtain a list of service centers and other repair/replacement instructions by calling: (800) 458-8407 or send an e-mail to: Consumeraffairs@consumer.sunbeam.com Please include name, address, telephone number, product model number and description of the ...

  • Sunbeam 3035 - page 21

    ...

  • Sunbeam 3035 - page 22

    MEDIDAS DE SEGURIDAD Al usar la plancha, siempre se deben tomar precauciones de seguridad, incluidas las siguientes: l LEA TODAS LAS INSTRUCCIONES ANTES DE USARLA. l Utilice la plancha sólo para su uso indicado. l Para protegerse contra el riesgo de descarga eléctrica, no sumerja la plancha en agua u otros líquidos. l La plancha siempre debe est ...

  • Sunbeam 3035 - page 23

    . Si la plancha no funciona normalmente, desconéctela de la fuente de alimentackín eléctrica y llévela a un centro de servicio autorizado para que sea examinada. . La plancha Sunbeam@ ha sido diseñada para que descanse sobre su talón de apoyo. No deje la plancha desatendida. AJO coloque la plancha sobre una superficie desprotegida, aunque lo ...

  • Sunbeam 3035 - page 24

    PalabrasdeBienvenida...............................3 Información Sobre la Plancha.. . . . . . . . . . . . . . . . . . . . . . . . .4 Cómo Llenar el Depósito de Agua . . . . . . . .5 Extendiendo el Cordón Eléctrico . . .6 Cómo Planchar.. . . . . . . . . . . . . . . . . . ._ . . . . . . . . . . . . . . . . . .7 Planchado en Seco . . . . . . . . ...

  • Sunbeam 3035 - page 25

    a ifelicitaciones por la Compra de su Plancha SUNBEAW! Sunbeam ha diseñado su plancha para brindar la máxima calidad, facilidad de USO y conveniencia. Sunbeam le ofrece una plancha ideal para su estilo de vida: Estas Planchas SUNBEAW Simple Pres9 Ofrecen las Siguientes Funciones: l SPRAY MISP - Proporciona un fino vapor de agua a fin de humedecer ...

  • Sunbeam 3035 - page 26

    la Plancha l.Disparo SPRAY MISTO 2.Depósito de Agua con Tapa Deslizante 3.Agujero para Llenado de Agua 4.Botón SHOT OF STEAM@ (Modelo 3040 solamente) 5.Botón SPRAY MIST@ 6.Control de Vapor 7.Luz Indicadora de Encendido 8.Luz Parpadeante Indicadora de la Función de Apagado Automático MOTION SMART” Patentado 9.Cómodo Mango Ergonómico 10A. Co ...

  • Sunbeam 3035 - page 27

    Cómo llenar el Depósito de Agua Debe llenar el depósito de agua para usar las funciones SPRAY MIST@ y SHOT OF STEAM” y para que salga vapor de la plancha. Recomendación: Sunbeam prueba cada plancha en la fábrica para asegurar su correcto funcionamiento. Esta prueba puede dejar una pequeña cantidad de agua en el depósito, lo cual no danara ...

  • Sunbeam 3035 - page 28

    I 2 Abra el depósito de agua deslizando la tapa y sujete la plancha en forma inclinada. 3. Llene el depósito de agua con agua de caño hasta que llegue al nivel de llenado máximo (10 onzas). ADVERTENCIA: Para evitar el riesgo de quemaduras, tenga cuidado al llenar una plancha caliente con agua. las partes metálicas calientes, el agua caliente y ...

  • Sunbeam 3035 - page 29

    Planchando en Seco 1. Asegúrese de que el control del vapor (Steam) esté en la posición OFF (apagado). 2. Enchufe el cable en un tomacorriente de CA de 120 voltios (in México, 127 voltios). Se encenderá el indicador de encendido. 3. Gire el disco selector de tela (Fabric) a la posición deseada para planchando en seco (Silk [seda] o Synthetics ...

  • Sunbeam 3035 - page 30

    I 00 las es SPRAY MIST” La función SPRAY MISTO humedece la tela para ayudar a eliminar las arrugas de las telas gruesas y asentar pliegues. Para usar la función SPRAY MIST? Presione firmemente el botón SPRAY MISTO. SHOT OF STEAM La función SHOT OF STEAM@ proporciona una descarga adicional de vapor para una penetración profunda de arrugas dif ...

  • Sunbeam 3035 - page 31

    vapor vt?hXd (Modelo 3040 solamente) La función de vapor vertical permite que la plancha funcione como vaporizador de prendas. Recomendación: Cuando use la función de vapor vertical en ropas, cuelgue la ropa en un colgador de ropa para obtener mejores resultados. También se puede vaporizar las cortinas colgadas. Para usar el Vapor Vertical: 1. ...

  • Sunbeam 3035 - page 32

    Función de Apagado Automático MOTION SMARP” Cuando la plancha está encendida, el indicador de encendido se ilumina de manera fija, indicando que la plancha tiene alimentación eléctrica. Si deja la plancha: l En posición vertical (sobre su talón de apoyo) sin moverla, la plancha se apagará automáticamente después de 15 minutos. El indica ...

  • Sunbeam 3035 - page 33

    , la Plancha del TJso Cómo Apagar la Plancha 1. Gire el control del vapor (Steam) y el disco selector de tela (Fabric) a la posición OFF (apagado). 2. Desenchufe la plancha de la fuente de alimentación. ADVERTENCIA: NUNCA tire del cable de alimentación cuando desconecte la plancha, ya que esto puede dañar el cable. Cómo Guardar la Plancha 1. ...

  • Sunbeam 3035 - page 34

    I . . Mantenlmlentr>a 1 Limpieza de la Placa de Base Limpie la placa de base si se acumula almidón LI otros residuos. Para limpiar la Placa de Base: 1. Deje que la plancha se enfríe y luego límpiela con un pafio suave y húmedo. ADVERTENCIA: NO use limpiadores abrasivos, almohadillas raspadoras abrasivas ni vinagre para limpiar la placa de ba ...

  • Sunbeam 3035 - page 35

    2. Llene el depósito de agua con agua de caño (10 onzas) y cierre la tapa del deposito de agua. 3. Enchufe la plancha en un tomacorriente. El indicador de corriente se iluminará. 4. Coloque el disco selector de tela (Fabric) en el nivel de temperatura para planchar lino (Linen) y permita que la plancha se caliente durante 2 minutos. 5. Gire el c ...

  • Sunbeam 3035 - page 36

    8. Gire el control del vapor (Steam) a la posición OFF (apagado). 9. Abra la tapa del depósito de agua, invierta la posición de la plancha y deje que el agua restante salga por el orificio de llenado. 10. Seque la placa de base con una toalla. ll. Enchufe la plancha y establezca el disco selector de tela (Fabric) en Linen (lino). Deje que la pla ...

  • Sunbeam 3035 - page 37

    I Recbs y Giua de P Recomendaciones para el Planchado l Siempre lea las etiquetas de la prenda y siga las instrucciones de planchando del fabricante. l Clasifique las prendas que va a planchar según el tipo de tela. l Primero debe planchar las prendas que requieren baja temperatura (por ejemplo, las prendas de seda y teIa sintética) a fin de evit ...

  • Sunbeam 3035 - page 38

    Guía de Planchado Tela salacchdevapm Acrílico Dry/ (Seco) Acetato Dry/ (Seco) Seda Dry (Seco) Viscosa Dry (Seca) o bien Steam (Vapor) Nylon Poliéster Rayón Lana Dry/(Seco)o bien Steam (Vapor) Dry(Seco) o bien Steam (Vapor) Dry(Seco) o bien Steam (Vapor) Steam (Vapor) Combinaciones Steam (Vapor) de lana Combinaciones Steam (Vapor) de algodón Co ...

  • Sunbeam 3035 - page 39

    de IJn Año Sunbeam Products, Inc. (“Sunbeam”) garantiza, por un período de un año a partir de La fecha de compra, que este producto csta libre de defectos de material y fabricación. Sunbeam, a su discreción, reparara o reemplazará este producto o cualquier componente del producto que se encontrara defectuoso durante el período de la gara ...

  • Sunbeam 3035 - page 40

    Cómo Obtener el Servicio de la Garantía Lleve el producto .a un centro de servicio autorizado Sunbeam. Puede obtener una lista de centros de servicio y otras instrucciones de reparación /reemplazo llamando al teléfono: (800) 458-8407 0 envíe un mensaje por correo electrónico a: Consumeraffairs@consumer.sunbeam.com Por favor incluya su nombre, ...

メーカー Sunbeam カテゴリー Iron

Sunbeam 3035のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 3035の取扱説明書
- Sunbeamの製品カード
- パンフレット
- またはSunbeam 3035の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sunbeam 3035の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sunbeam 3035の取り付け説明書、サービスマニュアル、簡易説明書、またはSunbeam 3035のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sunbeam 3035の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sunbeam 3035デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSunbeam 3035を使用するのを助ける技術的文書のことです。説明書は通常、全てのSunbeam 3035ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sunbeamの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sunbeam 3035の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSunbeam 3035の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sunbeam 3035に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sunbeam 3035デバイスの基本機能を使うにあたってのヒント。 Sunbeam 3035のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sunbeam 3035に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSunbeam 3035のメーカー/サービスへの連絡先に関する情報。

Sunbeam 3035についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSunbeam 3035の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSunbeam 3035で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)