Graco 258849の取扱説明書

28ページ 6.74 mb
ダウンロード

ページに移動 of 28

Summary
  • Graco 258849 - page 1

    3A1456D Operation EasyMax ™ WP Cor dless P aint Spra y er U .S. Pate nt 6,619,569; D630,708S and othe r patents pendin g Communit y Design Registration No. 0012282 55; India P atent No. 230058 China P atent No. ZL201030238 948.3; T aiwan P atent No. 142952 - For portable spray applications of wate r -based arc hitectural paints and coatings only ...

  • Graco 258849 - page 2

    Table of Contents 2 3A1456D T able of Contents W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Component Ident ification . . . . . . . . . . . . . . . . . . . . . . . . . 5 Common Pr ocedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pressure Relief Procedure . . . . . . . . . . . . . . . . . ...

  • Graco 258849 - page 3

    Warnings 3A1456D 3 Wa r n i n g s The follo wing war nings are for the setup, use, ma intenance, and repair of this equipment. Th e e xclamatio n point symbol aler ts y ou to a general warning and the ha zard symbols refer to procedure-sp ecific risks. When these symbols appear in the body of thi s manual, ref er back to these W ar nings. Product-s ...

  • Graco 258849 - page 4

    Warnings 4 3A1456D B A TTER Y HAZARD The batter y may leak, e xplode, cause b ur ns, or cause an explosion if mishandled. Contents of an open battery can cause se vere irritation and/or chemical burns. If on skin, wash with soap and w ater . If in ey es, flush with water f or at least 15 minutes and seek immediate medical attention. • Do not shor ...

  • Graco 258849 - page 5

    Component Identification 3A1456D 5 Component Identification *NO TE: Filter asse mbly is re verse-threade d. T ur n left (or co unter-clockwise) to tigh ten, tur n rig ht (or clockwise) to loo sen. ti15479a D Fa E R J K C Y T S W B D N A Fa Fb P H G M Z A Cordless Paint Spra yer B Spra yer Hook C Outlet V alve Repair Access D Spra y Tip/Guard Assemb ...

  • Graco 258849 - page 6

    Common Procedures 6 3A1456D Common Pr ocedures Pressure Relief Pr ocedure 1. Engage tr igger lock. 2. Put control valve UP to release pres sure. Tr i g g e r L o c k Spra y Tip P osition Contr ol V alve P osition Do not opera te or spra y near children. Do not aim the spra yer at, or spra y any person or animal. K eep hands and other body par ts aw ...

  • Graco 258849 - page 7

    Charging the Battery 3A1456D 7 Char ging the Batter y Batteries are initially 50% charge s to provide optimum battery life and requir e charging before first use. It takes approximatel y 45 minutes to charge a dead battery to 80%, at which point it can be used.It will take approxi- mately 75 minutes to fully char ge a dead battery. 1. Slide batter ...

  • Graco 258849 - page 8

    Setup 8 3A1456D Setup Suction T ube Selection This spra yer comes with two diff erent suction tubes. Standar d Suction T ube (spra ys ceilings and walls): When spra ying walls, the inlet of the suction tube should be aimed at the fr ont of the material cup . When spra ying ceilings , the inlet of the suction tube should be aimed at th e back of the ...

  • Graco 258849 - page 9

    Setup 3A1456D 9 Spra ying Stains or Clear Coats (Fine-Finish Optimizer) The Fine-Finish Optimizer should be installed an d used when spraying thin materi al such as stain or clear coats. The Fine-Finish Op timizer restricts the mat er ial flow resulting in a finer quality finish. Installation 1. Remove material cup and suctio n tube. 2. Push Fine-F ...

  • Graco 258849 - page 10

    Setup 10 3A1456D Materials NO TE: Wh en sprayin g water-bas ed materials, flush the spra yer th oroughly with water . Star ting a New Job (or Refilling the Cup) 1. Engage trigger lock and put prime/relief valv e UP to release pressure. 2. Use the Fine-F inish Optimizer cleaning tool to lightly push on inlet v alve to mak e sure it mov es up and dow ...

  • Graco 258849 - page 11

    Setup 3A1456D 11 Install Tip/Guar d Assembly (if not installed) Rever sible Tip Selection Chart 1. Engage trigger lock and put prime/relief valv e UP to release pressure . Then remove Tip/Guard Assemb ly . 2. Install filter to Spra y Tip/Guard Assembly (make sure filter is fully installed into spra yer). NO TE: Filter ass em- bly is re v erse-threa ...

  • Graco 258849 - page 12

    Setup 12 3A1456D Basic Spra ying T echniques NO TE: Use a piece of scrap cardboa rd to practice these basic spra ying techniques bef ore you begin spr ayi ng the surf ace. Anything y ou don’t want painted that is in the area of your spraying surface shou ld be covered or remo ved. Hold spra ye r at least 25 cm (10 in .) from surf ace and adjust a ...

  • Graco 258849 - page 13

    Unclogging Spray Tip/Guard Assembly 3A1456D 13 Unc logging Spra y Tip/Guar d Assembl y Occasionally , debris from material can accumulate and clog the spra y tip. P erf or m the fo llowing steps to unclog the tip . 1. T o unclog tip obstr uction, en gage trig ger lock and pull relief valv e UP to release pressure. 2. Re verse spra y tip to UNCLOG p ...

  • Graco 258849 - page 14

    Shutdown and Cleaning 14 3A1456D Shutdo wn and Cleaning Flushing Spra yer 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remo ve material cup and properly dispose cup liner or e xcess material. 3. Remo ve and clean sp ray er intak e tube and screen with wat er (or flushing fluid) and a brush e v er y time you flush the sp ...

  • Graco 258849 - page 15

    Shutdown and Cleaning 3A1456D 15 6. Disconnect trigger loc k and trigger spra yer f or appro ximately 15 se conds. Engage trigger loc k. 7. Discard contaminated fluid and refill with appropr i- ate flushing fluid. 8. Disengage trigger loc k, re verse tip to UNCLOG position, an d pull tr igger for 5 seconds to prime spra yer . 9. Put prime/relief v ...

  • Graco 258849 - page 16

    Storage 16 3A1456D Cleaning Spra yer Exterior • Wipe paint off outside of spray er using a soft cloth moistened with w ater or flushing fluid . Do NO T submerge the spra yer . Tips • Tips will require replac ement depending on abrasiveness of paint. • Do not spra y with worn tip . See T roub leshooting , page 21. Storage 1. Dilute 4 oz. of Pu ...

  • Graco 258849 - page 17

    Replacement Parts and Kits 3A1456D 17 Replacement P ar ts and Kits 1 8 11 6 5 4 3 7 12 16 ti15497a 2 15 14 17 10 18 9 19 21 20 22 13a 13 13a 13 Ref. P art Description 1 262583 Spray er , replacement (no tip , battery , suction tube , or material cup) 2 16D562 Liner , replacement (10 pac k) 3 24F045 Fine Finish Opti mizer (with Cleaning T ool) 2-P a ...

  • Graco 258849 - page 18

    Repair Kit 18 3A1456D Repair Kit Outlet V alve Fitting NO TE: Before doing any repair to pump, perf or m Flushing Spra yer procedure , page 14. Re m ova l 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remove battery . 3. Remove pump outlet cap . 4. Use tool (sup plied) to loosen and remov e outlet valv e fitting. Install ...

  • Graco 258849 - page 19

    Alternate Priming Method 3A1456D 19 Alternate Priming Method 1. Engage tr igger lock and put p rim e/relief valve UP to release pressure . 2. Remov e material cup and f ill with flushing mater ial. 3. With spray er in pr ime mode, tur n s pra yer upside-down, remov e strainer and slowly po ur flush- ing mater ial into the intake tube u ntil full. 4 ...

  • Graco 258849 - page 20

    Alternate Priming Method 20 3A1456D Inlet V alve Cleaning Re m ova l 1. Engage trigger lock and pull relief v alve UP to release pressure . 2. Remove material cup and suctio n tube. 3. Hold spr ay er upside-down and use wrench or sock et to loo sen and remove inlet fitting, inlet valv e, and spring. NO TE: Make sure the spring also comes out. U se ...

  • Graco 258849 - page 21

    Troubleshooting 3A1456D 21 T roub leshooting Chec k ev er ything in this T roubleshooting T able bef ore you br ing the spra ye r to an authorized serv ice center . Prob lem Cause Solution Spra yer mak es no sound when trigger is pulled T rigger is locked. Disengage trigger lock. See page 6. Status Indicator Light is solid RED when trig- gering, in ...

  • Graco 258849 - page 22

    Troubleshooti ng 22 3A1456D Spra y Pattern Dia gnostics Spra ys with poor results Tip is pa r tially c logged See Unclog ging Tip/Guard Assembl y , page 13. Tip is not in corre ct position Rotate tip to SPR A Y po sition. Incorrect tip for application of material. See Rev ersible Tip Selection Chart, page 11. Tip filter is par tially clogged Clean ...

  • Graco 258849 - page 23

    Troubleshooting 3A1456D 23 Spra y patter n is too narrow: Spra yer is too close to target surface . Incorrect tip for application of material. Tip is wor n or damaged. Mov e spra yer aw ay from surf ace (10 in). See Rever sible Tip Selection Chart, page 11. Replace tip . See Install Tip/Gua rd Assembl y , page 11. Spra y patter n is too wide: Spra ...

  • Graco 258849 - page 24

    Technical Data 24 3A1456D T e c hnical Data Sprayer: Maximum working pressure 2000 psi (137.8 bar , 13.7 MPa) W eight 6.32 lb (2.87 kg) Dimensions: Length 13.25 in. (33.6 cm) Width 5.0 in. (12.7 cm) Height 10.375 in. (33.9 cm) Storage temperature r ange ◆❖ 32° to 122°F (0° to 50°C) Operating temperature r ange ✔ 40° to 90° F (4° to 32? ...

  • Graco 258849 - page 25

    Notes 3A1456D 25 Notes ...

  • Graco 258849 - page 26

    Notes 26 3A1456D Notes ...

  • Graco 258849 - page 27

    Notes 3A1456D 27 Notes ...

  • Graco 258849 - page 28

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. Original instructions. T his manual contains English. MM 3 A1456 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Kor ...

メーカー Graco カテゴリー Paint Sprayer

Graco 258849のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 258849の取扱説明書
- Gracoの製品カード
- パンフレット
- またはGraco 258849の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Graco 258849の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Graco 258849の取り付け説明書、サービスマニュアル、簡易説明書、またはGraco 258849のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Graco 258849の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Graco 258849デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGraco 258849を使用するのを助ける技術的文書のことです。説明書は通常、全てのGraco 258849ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Gracoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Graco 258849の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGraco 258849の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Graco 258849に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Graco 258849デバイスの基本機能を使うにあたってのヒント。 Graco 258849のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Graco 258849に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGraco 258849のメーカー/サービスへの連絡先に関する情報。

Graco 258849についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGraco 258849の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGraco 258849で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)