Roland S-4000Dの取扱説明書

17ページ 3.15 mb
ダウンロード

ページに移動 of 17

Summary
  • Roland S-4000D - page 1

    Owner’s Manual Main Features The S-4000D is a splitter and power distributor for use with the RSS Digital Snake System. Using this device enables you to do the following: • It permits you to split the master REAC device’s input audio to a split REAC device. • It enables you to extend REAC cables in lengths of 100 meters. • This unit suppl ...

  • Roland S-4000D - page 2

    2 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilater ...

  • Roland S-4000D - page 3

    3 USING THE UNIT SAFELY 001-50 ● Connect mains plug of this model to a mains socket outlet with a protective earthing connection. ................................................................................................................................. 002a ● Do not open or perform any internal modifications on the unit. ................ ...

  • Roland S-4000D - page 4

    4 USING THE UNIT SAFELY 013 ● When using this device in an environment where children are present, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. ................................................................................................................. ...

  • Roland S-4000D - page 5

    5 IMPORTANT NOTES 301 ● Do not connect this unit to the same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise m ...

  • Roland S-4000D - page 6

    6 Table of Contents Main Features.......................................................................................... Cover IMPORTANT SAFETY INSTRUCTIONS ............................................................ 2 USING THE UNIT SAFELY ................................................................................ 3 IMPORTANT NOTES ...... ...

  • Roland S-4000D - page 7

    7 Panel Descriptions REAC Ports 1–10 You can connect the master REAC device to the desired REAC port and split its output to other REAC ports. REAC ports 3 to 10 are compatible with REAC EMBEDDED POWER, and can supply power to devices compatible with REAC EMBEDDED POWER. When a REAC device is connected, the system automatically detects whether th ...

  • Roland S-4000D - page 8

    8 Panel Descriptions Grounding Terminal If necessary, use this terminal to connect the S-4000D chassis to an external grounding source. * Never attempt to use the following sources for an external ground connection: • Water pipes (may result in shock or electrocution) • Gas pipes (may result in fire or explosion) • Telephone-line ground or li ...

  • Roland S-4000D - page 9

    9 Turning the Power On and Off Connect one end of the supplied AC power cord to a grounded AC outlet, and the other end to the AC INPUT connector to provide power for the S-4000D’s internal power supply. To prevent the power cord from being unplugged inadvertently, you should secure the power cord in place using the power cord clamp. 1 Lift up th ...

  • Roland S-4000D - page 10

    10 About Placement This unit performs forced cooling by means of a cooling fan. Give attention to the following points. • Never block the cooling-fan intake port or ventilation port in the rear panel. Doing so may cause the temperature of the unit’s interior to rise, resulting in malfunction caused by heat. • Clean away any buildup of dust in ...

  • Roland S-4000D - page 11

    11 About Placement If using commercially available Cat5e Ethernet cables, attach the supplied REAC connector covers to the connectors. * Attaching the REAC connector covers is a necessary measure to counter electromagnetic noise. Attach the rubber feet when not rack mounting the unit. Peel off the backing from the double-sided adhesive tape on the ...

  • Roland S-4000D - page 12

    12 Notes to Observe in Using the REAC System The REAC cables used in digital snake systems employ computer network technology to enable transmission of multichannel audio signals. In very rare cases, however, noise may be generated when these systems are used in certain environments. If noise is present, check the following points. • Ensure that ...

  • Roland S-4000D - page 13

    13 System Connection Example * The M-400 must be running system software version 2.0 or later. * The M-48 can be set and managed from the M-400 only if the M-48 is connected to the M-400’s REAC B port via the S-4000D. * In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat5e Ethernet cable such as the 20 ...

  • Roland S-4000D - page 14

    14 System Connection Example * The S-1608 system must be running system software version 2.0 or later. If you’re using the S-4000 system, the S-4000 system must be running system software 2.1 or later. * In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat5e Ethernet cable such as the 20 meter or 100 me ...

  • Roland S-4000D - page 15

    15 Main Specifications * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Connectors REAC port: (RJ-45 EtherCon type) x 2 REAC EMBEDDED POWER port: (RJ-45 EtherCon type) x 8 Indicators REAC EMBEDDED POWER: Red x 8 LINK: Green x 10 ACT: Yellow x 10 POWER: Blue x 1 P ...

  • Roland S-4000D - page 16

    16 For China This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur ...

  • Roland S-4000D - page 17

    17 For EU Countries S-4000D_e.book 17 ページ 2010年10月8日 金曜日 午後1時1分 ...

メーカー Roland カテゴリー Log Splitter

Roland S-4000Dのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- S-4000Dの取扱説明書
- Rolandの製品カード
- パンフレット
- またはRoland S-4000Dの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Roland S-4000Dの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Roland S-4000Dの取り付け説明書、サービスマニュアル、簡易説明書、またはRoland S-4000Dのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Roland S-4000Dの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Roland S-4000Dデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRoland S-4000Dを使用するのを助ける技術的文書のことです。説明書は通常、全てのRoland S-4000Dユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Rolandの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Roland S-4000Dの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRoland S-4000Dの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Roland S-4000Dに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Roland S-4000Dデバイスの基本機能を使うにあたってのヒント。 Roland S-4000Dのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Roland S-4000Dに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRoland S-4000Dのメーカー/サービスへの連絡先に関する情報。

Roland S-4000Dについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRoland S-4000Dの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRoland S-4000Dで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)