Sennheiser ASA 1の取扱説明書

22ページ 0.83 mb
ダウンロード

ページに移動 of 22

Summary
  • Sennheiser ASA 1 - page 1

    ASA 1 Antenna Splitter Instruction manual ...

  • Sennheiser ASA 1 - page 2

    ...

  • Sennheiser ASA 1 - page 3

    1 Contents Important safety instructions ....... ... .............. ............... ........... ...... 2 The ASA 1 active antenna splitter .. ............ ........... .............. ......... 4 Delivery includes .. .............. .............. ............... .............. .............. ...... 4 Operating elements .......... .............. ..... ...

  • Sennheiser ASA 1 - page 4

    2 Important safety instructions Important safety instructions • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the device on t o third parties. • Heed all warnings and follow all instruction s. • Clean only with a slightly damp cloth. • Refer all servicing to qualified ser ...

  • Sennheiser ASA 1 - page 5

    3 Important safety instructions Intended use of the device Intended use of the ASA 1 includes: • having read and understood this instr uction manual especially the chapter “Im portant safety instructions” on page 2, • using the device wi thin the operating conditio ns and limitations described in this instruction manual. “Improper use” ...

  • Sennheiser ASA 1 - page 6

    4 The ASA 1 active antenna splitter The ASA 1 active antenna splitter The ASA 1 active antenna spl itter has been designed to enable routing of UHF antenna signals to several receivers in a multi- channel system. Up to four dive rsity receivers may be supplied with signal by only two antennas. The integral RF amplifiers ensure that the ASA 1 does n ...

  • Sennheiser ASA 1 - page 7

    5 Operating elements Operating elements  On/Off button  Operation indicator  Cable grip for cable of mains unit  DC IN socket for connection o f NT 1-1 mains unit  BNC socket RF OUT A RF output only for connection of an additional ASA 1 (to create a 1-to-8 diversity splitter)  Four BNC sockets A1 to A4 RF outputs of diversity sect ...

  • Sennheiser ASA 1 - page 8

    6 Operating elements Block diagram The below block diagram (also depicted on the base of the device) shows the signal flow in the device. ...

  • Sennheiser ASA 1 - page 9

    7 Putting the ASA 1 into operation Putting the ASA 1 into operation Preparing the ASA 1 for use For table-t op use, fix the device feet to the base of the ASA 1. Do not fit the device feet when mounting the ASA 1 into a 19” rack. 왘 Ensure that the base of the ASA 1 is clean and free from grease before fitting th e device feet. 왘 Fix the devic ...

  • Sennheiser ASA 1 - page 10

    8 Putting the ASA 1 into operation Stacking several ASA 1 You can stack the ASA 1 and the re ceivers on top of each other. . 왘 Stack the devices so that the recesses of the stacking elements completely engage with each other. Mounting the ASA 1 into a 19” rack Do not fit the devi ce feet when mounting the ASA 1 into a 19” rack. CAUTION! Dange ...

  • Sennheiser ASA 1 - page 11

    9 Putting the ASA 1 into operation For rack mounting the ASA 1, you require (see “Accessories and spare parts” on page 17): • the GA 3 19“ rack adapter Rack mounting one ASA 1 왘 Unscrew and remove the two recessed head scr ews (M4x8) on one side of th e ASA 1. 왘 Hold one rack mount “ear” to the ASA 1. 왘 Secure the rack mount “ea ...

  • Sennheiser ASA 1 - page 12

    10 Putting the ASA 1 into operation If you want to front mount the antennas: 왘 Use the optional AM 2 antenna front moun t kit (see “Accessories and spare parts” on page 17). I f y o u w a n t t o u s e r e m o t e a n t e n n a s ( s e e “ A c c e s s o r i e s a n d s p a r e parts” on page 17): 왘 Connect the remote antennas. T o mount ...

  • Sennheiser ASA 1 - page 13

    11 Putting the ASA 1 into operation Rack mounting two devices i nto the same 19” slot 왘 Place the two devices (e.g. the ASA 1 and a stationary receiver) side by side upsi de-down onto a flat surface: 왘 Secure the jointing pl ate  to the devices using six recessed head screws (M 3x 6). 왘 Secure the rack mount “ears”  to the devices ...

  • Sennheiser ASA 1 - page 14

    12 Putting the ASA 1 into operation Connecting devices to the ASA 1 and switching the ASA 1 on Connecting the antennas 왘 You can connect the following antenna types to the antenna inputs  and  : – two A 103 1-U or A 2003-UHF passi ve antennas – or a combination of passi ve antenna (A 1031-U or A 2003-U) and a ntenna booster (AB 3). Conn ...

  • Sennheiser ASA 1 - page 15

    13 Putting the ASA 1 into operation Connecting the ASA 1 to the mains For powering the ASA 1, the connected receivers and two optional antenna boosters, yo u require the NT 1-1 mains unit (see “Accessories and spare parts” on page 17). 왘 Pass the cable of the NT 1-1 mains unit through the cable grip  . 왘 Insert the blue DC connector of t ...

  • Sennheiser ASA 1 - page 16

    14 Putting the ASA 1 into operation Making an 8-channel system using the ASA 1 There are two ways to link two ASA 1 together to create a 1-to- 8 diversity splitter: First possibility: T w o antennas supply an 8-channel system * AB-3 antenna boosters are only required for longer antenna cables (from approx. 10 m). AB 3* AB 3* ASA 1 ASA 1 ...

  • Sennheiser ASA 1 - page 17

    15 Putting the ASA 1 into operation Second possibility: Linking tw o 4-channel systems * AB-3 antenna boosters are only required for longer ant enna cables (from approx . 10 m). AB 3* AB 3* ASA 1 ASA 1 ...

  • Sennheiser ASA 1 - page 18

    16 Cleaning the ASA 1 Cleaning the ASA 1 왘 Before cleaning, dis connect the ASA 1 from the mains (see page 13). 왘 Only use a slig htly damp cl oth to clean the devi ce. If a problem occurs ... If a problem occurs tha t is not listed in the above table or i f the problem cannot be solved with the proposed solutions, please contact your local Sen ...

  • Sennheiser ASA 1 - page 19

    17 Accessories and spare parts Accessories and spare parts The following ASA 1 accessories are available from your Sennheiser partner: Cat. No. Accessory/spar e part 503158 NT 1-1 EU Mains unit for powering the ASA 1, four receivers and two antenna boosters, EU version 503873 NT 1-1 US Mains unit for powering the ASA 1, four receivers and two anten ...

  • Sennheiser ASA 1 - page 20

    18 Specifications Specifications Ty p e a p p r o v a l s ASA 1 antenna splitter 2 x 1:4 or 1 x 1:8, active Antenna cable 8 items, 50 cm, BNC Frequency range 500 to 870 MHz at –3 dB Amplification In A – Out A 0 ± 1 dB Amplification In A – Out A1 ... A4 0 ± 1 dB Amplification In B – Out B1 .. . B4 0 ± 1 dB Impedance 50 Ω Operating voltag ...

  • Sennheiser ASA 1 - page 21

    19 Manufacturer Declarations Manufacturer Declarations Wa rr a nt y Sennheiser electronic GmbH & Co. KG gives a war ranty of 24 months on this product. Additional warranty con ditions can be found on our websit e at www.sennheiser.com under “Service & Su pport” and “T erms of Wa rr an ty ”. CE Declaration of Conformity This device i ...

  • Sennheiser ASA 1 - page 22

    Sennheiser electronic GmbH & Co. KG Printed in Germany Am Labor 1, 30900 W edemark, Germany Publ. 01/09 www.sennheiser.com 532034/A01 ...

メーカー Sennheiser カテゴリー Log Splitter

Sennheiser ASA 1のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ASA 1の取扱説明書
- Sennheiserの製品カード
- パンフレット
- またはSennheiser ASA 1の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sennheiser ASA 1の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sennheiser ASA 1の取り付け説明書、サービスマニュアル、簡易説明書、またはSennheiser ASA 1のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sennheiser ASA 1の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sennheiser ASA 1デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSennheiser ASA 1を使用するのを助ける技術的文書のことです。説明書は通常、全てのSennheiser ASA 1ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sennheiserの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sennheiser ASA 1の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSennheiser ASA 1の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sennheiser ASA 1に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sennheiser ASA 1デバイスの基本機能を使うにあたってのヒント。 Sennheiser ASA 1のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sennheiser ASA 1に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSennheiser ASA 1のメーカー/サービスへの連絡先に関する情報。

Sennheiser ASA 1についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSennheiser ASA 1の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSennheiser ASA 1で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)