日本語 dropdown-ico

LevelOne 10/100M 32bit Fast Ethernet PC cardの取扱説明書

51ページ 0.96 mb
ダウンロード

ページに移動 of 51

Summary
  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 1

    LevelOne 10/100M 32bit Fast Ethernet PC card user’s manual Version 1.2 ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 2

    ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 3

    Regulatory compliance This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This equi p ment also c omplies with CE EN55022 Class B and VCCI V3 Class B specifications. These limits are designed to provide reasonable prote c tion against harmful interference when the equ ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 4

    LevelOne Fast Ethernet PC Card user’s manual ii Table of contents Regulatory compliance ...................................................................................... i About this m anual ............................................................................................... i Table of contents .................................... ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 5

    Preface iii Microsoft Windows for Workgroups 3.11 .......................................................38 Netware 3.X/4.X client .....................................................................................39 Microsoft LAN Manager .................................................................................39 Artisoft LANtastic versio ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 6

    4 Chapter 1 Introduction Thank you for purchasing the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card . This high - speed LevelOne 10/100Mbps 32bit Fast Ethernet PC Card co m plies with the CardBus standard and uses a female RJ - 45 adapter to connect to the ne t work. The LevelOne 10/100Mbps 32bit Fast Ethernet PC Card is switc h less and software ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 7

    Hardware installation 5 Chapter 2 Hardware installation This chapter covers inserting your LevelOne 10/100Mbps 32bit Fast Ethernet PC Card in the notebook’s CardBus slot, and co n necting the card to a network. What’s in the package Please ensure that the following items are included in y our pac k age. If any items are missing, contact your de ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 8

    LevelOne Fast Ethernet PC Card user’s manual 6 Please take note that the hardkey of a CardBus card is different from that of the traditional 16 - bit PCMCIA card. This mechanism can protect the 3.3V CardBus card from mis - insertion to 5V 16 - bit PCMCIA slot. Hardkey of 5/3.3V Traditional PCMCIA Card (left) and 3.3V CardBus Card (right) Insertin ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 9

    Hardware installation 7 Follow the procedure below to install the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card. 1. With the card’s 68 - pin connector facing the notebook’s CardBus slots, slide the card all the way into an empty slot. Do not force the connection! 2. Connect to a network. (See Connecting to a LAN that fo l low.) Connecting to ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 10

    LevelOne Fast Ethernet PC Card user’s manual 8 Status LEDs The following illustration shows the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card LEDs: The following table describes the meaning of the LEDs: LED MEANING 10/100M Indicates the connection speed. When off, the conne c tion speed is 10 Mbps. When on, the connection speed is 100 Mbps. LIN ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 11

    Hardware installation 9 Ejecting the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card After you have disconnected the RJ - 45 connectors, y ou can eject the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card from the notebook’s PC Card slot. Note! In Win 95/98/2000/ME operating systems, you do not have to power down the notebook to remove the card. T ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 12

    LevelOne Fast Ethernet PC Card user’s manual 10 N N O O T T E E S S ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 13

    11 Chapter 3 D river installation for Win 95/98/2000/ME/NT The following sections cover LevelOne 10/100Mbps 32bit Fast Ethernet PC Card driver installation in the Wi n dows 2000/98/95/NT/ME operating systems. Before Installation To identify the version of Windows 95, you can check the Ge n eral system prope r ties. To get the general system propert ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 14

    LevelOne Fast Ethernet PC Card user’s manual 12 PCMCIA socket is shown to be PCIC or TCIC compatible Controller , then the notebook cannot support CardBus. Driver installation for Windows 95 Installation of the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card is just the same as for any normal Windows 95 Plug & Play device. Follow the steps be ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 15

    Win 95/98/2000/ME/NT 13 3. Insert the driver disk and click Next to continue the install a tion. Windows searches for the driver and the following screen appears: 4. Click Finish to continue, Windows 95 copies driver files to the hard disk. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 16

    LevelOne Fast Ethernet PC Card user’s manual 14 5. Windows 95 prompts you to res tart the system. Click Yes to complete the install a tion. Driver installation for Windows 98 Follow the steps below to install the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card drivers for Windows 98. 6. Insert the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card i ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 17

    Win 95/98/2000/ME/NT 15 9. Select Search for the best driver for your device. (Reco m mended) and click Next . The following screen appears: 10. Ensure that the CD - ROM drive box is checked. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 18

    LevelOne Fast Ethernet PC Card user’s manual 16 11. Insert the driver disk into your floppy drive and click Next . The following screen appears: 12. Click Next . Windows 98 copies files to your hard disk drive, and you see the following screen: 13. Click Finish . ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 19

    Win 95/98/2000/ME/NT 17 No te! Windows 98 may need to copy r e quired system files and will prompt you to input the path to the files. Follow the instru c tions on your screen, then click OK to continue. You should r e boot your system to finish the ins tallation. Driver installation for Windows 2000 Follow the steps below to install the LevelOne 1 ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 20

    LevelOne Fast Ethernet PC Card user’s manual 18 3. Cli ck Next to continue the installation. A screen appears prompting you to select an installation method: 4. Select Search for a suitable driver for my device (re c ommended) and click Next . The following screen appears: ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 21

    Win 95/98/2000/ME/NT 19 5. Ensure that the Specify a location bo x is checked and click Next. The following screen a p pears: 6. Type “ E: Win2000 ” where “ E ” is your floppy drive letter. Insert the driver disk, and click OK . The following screen appears: ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 22

    LevelOne Fast Ethernet PC Card user’s manual 20 7. Click Next to continue. The following screen appears: 8. Click Yes to continue the installation. 9. Windows copies files and the following screen appears: ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 23

    Win 95/98/2000/ME/NT 21 10. Click Finish to complete the installation. You should reboot the computer to insure a successful installation. Driver installation for Windows ME Follow the steps belo w to install the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card drivers for Windows ME. 1. Insert the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card int ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 24

    LevelOne Fast Ethernet PC Card user’s manual 22 3. Select Specify the location of the driver (Advanced) and click Next . The foll owing screen appears: 4. Select Search for the best driver for your device. (Reco m mended) and choose Specify a location. Type "E: WinME" where " E " is your CD - ROM driver letter. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 25

    Win 95/98/2000/ME/NT 23 Insert the driver disk, and click Next. The following screen a p pears: 5. Click N ext . Windows ME copies files to your hard disk drive, and you see the following screen: 6. Click Finish . ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 26

    LevelOne Fast Ethernet PC Card user’s manual 24 Note! Windows ME may need to copy r e quired system files and will prompt you to input the path to the files. Follow t he instru c tions on your screen, then click OK to continue. You should r e boot your system to finish the installation. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 27

    Win 95/98/2000/ME/NT 25 Driver installation for Windows NT 4.0 This installation procedure assumes that you have installed the ne t work component on your computer . To check whether the network component has been installed, do u ble click the Network icon in the Control Panel . If it has not been installed, refer to the Windows NT 4.0 installation ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 28

    LevelOne Fast Ethernet PC Card user’s manual 26 4. Click Add to add a new adapter. The following screen a p pears: 5. Click Have Disk . The following screen appears: ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 29

    Win 95/98/2000/ME/NT 27 6. Type “ E: WinNT40 ” where “ E ” is your CD - ROM drive le t ter. Insert the driver disk, and click OK . After finding the installation file, the Select OEM Option window is di s played. 7. Click OK . A screens appears prompting you to input the IRQ, I/O port address , and co n nection type: ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 30

    LevelOne Fast Ethernet PC Card user’s manual 28 8. Select the desired resources and co n nection type. Note! You must select resources that are not being used by another device; othe r wise, you will have a system conflict error. In case of a system conflict e r ror, try another se t ting and continue. 9. Click OK to continue. Windows will config ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 31

    Win 95/98/2000/ME/NT 29 10. Click Close to exit the Network window. W indows NT 4.0 will bind the adapter with the network component and you will be prompted to restart the system. When Windows NT is finished binding the adapter to the network component, you are prompted to restart the sy s tem. 11. Click Yes to finish the instal lation. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 32

    30 Chapter 4 Driver installation for DOS environments This section covers CardBus 10/100Mbps Ethernet Card driver i n stallation for DOS environment operating systems. System Requirements Hardware R e quir e ments Notebook equipped with Type II PC Card slot and CardBus controller (PCMCIA 1995 PC Card Standard or higher) Software Requir e ments The ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 33

    Driver installation for DOS environments 31 the most suitable option settings, or you can perform a custom config u ration where you individually select each setting. Quick installation This section gives a brief overview of the installation process. For a more detailed d e scription, refer to The Install Program? 1. Card and Socket Services softwa ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 34

    LevelOne Fast Ethernet PC Card user’s manual 32 Car d Bus controller on your system. However, you must select hardware resource settings tha t are not being used by other d e vices; ot h erwise, your PC system may have device conflicts. 5. Insert the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card into the Car d Bus socket. Then attach the networ ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 35

    Driver installation for DOS environments 33 Press [Enter] to continue the installatio n. The program prompts you for the directory where you want to i n stall the driver files. You can choose the default directory name or enter a new name. Then, press <Enter> to continue with the insta l lation. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 36

    LevelOne Fast Ethernet PC Card user’s manual 34 The next screen asks if you want to do an Auto Configuration or a Custom Config u ration . Select Auto Configuration if you want to do a quick installation and use the default configuration settings. If you wish to individ u ally set any of the settings, then select Custom Configuration. Auto config ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 37

    Driver installation for DOS environments 35 After the configuration process, you are prompted to select the type of network that you are installing. Select a network operating sy s tem from the list by moving the cursor to your selection and pr essing <Enter>. After selecting the network operating system, the INSTALL pr o gram will copy and m ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 38

    LevelOne Fast Ethernet PC Card user’s manual 36 CONFIG.SYS file will also be modified to include the Enabler Driver. You should see the following message if the installation has been successful: Custom configuration To perform a custom installation, you need to select the Custom Configuration Menu after you begin the INSTALL program. After select ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 39

    Driver installation for DOS environments 37 IO port select Move the cursor to the desired I/O address and press <Enter>. Available I/O Ports are D000H, D400H, D800H, E000H, E400H and E800H. ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 40

    LevelOne Fast Ethernet PC Card user’s manual 38 Manual installation In most cases, the INSTALL program can make all system changes necessary for using your LevelOne 10/100Mbps 32bit Fast Ethernet PC Card . However, in some cases, you may wish to make chan ges manually. This section explains how to manually make driver and file modif i cations to ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 41

    Driver installation for DOS environments 39 Socket and Card Services to your notebook before executing the driver. If you do not have the Socket and Card Services program, ple ase contact your notebook vendor. The Install program can use the following syntax and format: RTPCI /?[h] /l /r<d> /s<d> /i<dd> /p<xxxx> /m<xxxx&g ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 42

    LevelOne Fast Ethernet PC Card user’s manual 40 After you executed RTPCI.EXE, you must run the RTBIOS.COM to enhance the PCI BIOS. Driver installation The following sections cover installation of the client driver for Windows for Workgroups 3.11, Netware 3X/4X, Microsoft LAN Manager, and Artisoft LANtastic Version 6.0. Microsoft Windows for Workg ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 43

    Driver installation for DOS environments 41 9. When the CardBus 10/100Mbps Ethernet Card dialog box a p pears, select the o p tions step by step. 10. Follow the instructions on the screen. 11. Reboot your computer. Netware 3.X /4.X client Follow these instructions to install the Netware 3.X/4.X client for your Fast Ethernet PC Card: 1. Run the INST ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 44

    LevelOne Fast Ethernet PC Card user’s manual 42 4. Select Add New Configs and then press <Enter>. 5. Select Other Driver and press <Enter>. 6. Insert the driver dis k into the floppy drive and click OK. 7. Select the Netwo rk Adapter Driver, CardBus 10/100Mbps Et h ernet Card, then click OK. 8. Press <Spacebar> to select the des ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 45

    Installation for LINUX 43 Chapter 5 Installation for LINUX This device driver has been fully tested on the following platforms: Slackware 3.6 Slackware 4.0 Slackware 7.0 Slackware 7.1 Redhat 5.2 Redhat 6.0 Redhat 6.2 The complete file list is as follows: README makefile rtl8139.c en0100r.o Before Installation Before you start rebuilding the driver, ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 46

    LevelOne Fast Ethernet PC Card user’s manual 44 have just rebuilt your kernel, you must first rebuild PCMCIA then the d evice driver to avoid any inconsistency. When you are rebuilding PCMCIA modules, be sure you select the following item: (1) Read from the currently running kernel. Otherwise, you might encounter some problems with when module ve ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 47

    Installation for LINUX 45 4. To install the driver > make install 5. To configure the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card > cd /etc/pcmcia To add the following text into the "config" file (The mode of the "config" file must be the " write" mode.) > vi config device " FPC - 0106TX class "n ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 48

    LevelOne Fast Ethernet PC Card user’s manual 46 N N O O T T E E S S ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 49

    47 Appendix A Troubleshooting Q&A for Windows environments These guidelines give you tips to deal with some problems you may encounter while using the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card. If the problems remain unsolved, contact your dealer for a s sistance. Windows 95/98 Problem: Ejecting the card from the CardBus socket hangs or r ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 50

    LevelOne Fast Ethernet PC Card user’s manual 48 Windows NT 4.0 Question: Does the driver support "hot - swap" on NT 4.0? Answer: Windows NT 4.0 don 't support hot swapping. If you want to remove the card, shut down the computer and remove it. Windows 2000 Question : What is the Microsoft digital signature? Answer: Drivers that pass ...

  • LevelOne 10/100M 32bit Fast Ethernet PC card - page 51

    49 ...

メーカー LevelOne カテゴリー Network Card

LevelOne 10/100M 32bit Fast Ethernet PC cardのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 10/100M 32bit Fast Ethernet PC cardの取扱説明書
- LevelOneの製品カード
- パンフレット
- またはLevelOne 10/100M 32bit Fast Ethernet PC cardの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、LevelOne 10/100M 32bit Fast Ethernet PC cardの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、LevelOne 10/100M 32bit Fast Ethernet PC cardの取り付け説明書、サービスマニュアル、簡易説明書、またはLevelOne 10/100M 32bit Fast Ethernet PC cardのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、LevelOne 10/100M 32bit Fast Ethernet PC cardの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

LevelOne 10/100M 32bit Fast Ethernet PC cardデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがLevelOne 10/100M 32bit Fast Ethernet PC cardを使用するのを助ける技術的文書のことです。説明書は通常、全てのLevelOne 10/100M 32bit Fast Ethernet PC cardユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

LevelOneの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. LevelOne 10/100M 32bit Fast Ethernet PC cardの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははLevelOne 10/100M 32bit Fast Ethernet PC cardの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。LevelOne 10/100M 32bit Fast Ethernet PC cardに関してこのドキュメントで見つけることができる全てのヒントの目次
3. LevelOne 10/100M 32bit Fast Ethernet PC cardデバイスの基本機能を使うにあたってのヒント。 LevelOne 10/100M 32bit Fast Ethernet PC cardのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。LevelOne 10/100M 32bit Fast Ethernet PC cardに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるLevelOne 10/100M 32bit Fast Ethernet PC cardのメーカー/サービスへの連絡先に関する情報。

LevelOne 10/100M 32bit Fast Ethernet PC cardについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもLevelOne 10/100M 32bit Fast Ethernet PC cardの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがLevelOne 10/100M 32bit Fast Ethernet PC cardで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)