HHB comm HHB MDP500の取扱説明書

32ページ 0.7 mb
ダウンロード

ページに移動 of 32

Summary
  • HHB comm HHB MDP500 - page 1

    OPERA TING INSTRUCTIONS La versión en español del manual de operaciones la encontrará en la web de HHB – www .hhb.co.uk La version Française de ce manuel d’utilisation est disponible sur le site web de HHB à www .hhb.co.uk Eine deutsche V ersion dieser Bedienungsanleitung ist im Internet unter der Adresse www .hhb.co.uk erhältlich. HHB MD ...

  • HHB comm HHB MDP500 - page 2

    2 PDISC_OP.QXD 6/11/00 12:43 pm Page 3 ...

  • HHB comm HHB MDP500 - page 3

    INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TOP PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • HHB comm HHB MDP500 - page 4

    • V ersatile analog and digital in/out: Analog XLR balanced mic/line input, 2 channels RCA phono unbalanced line output, 2 channels Digital in (SPDIF) Coaxial Optical Digital out (SPDIF) Coaxial (ON or OFF switchable) Optical (ON or OFF switchable) • Impo r ts and expo r ts audio data with a Macintosh or Windows PC via a Universal Serial Bus (U ...

  • HHB comm HHB MDP500 - page 5

    Should the HHB PORT ADISC require ser vice, it must be taken or sent to an HHB authorised dealer . Please retain the original packing for possible future use, and ensure the unit is suitably protected during transit. The manufacturer cannot accept responsibility for damage caused during transpor tation. In order to register ownership it is essentia ...

  • HHB comm HHB MDP500 - page 6

    1 BA TTERY COMP AR TMENT This cover slides off (from right to left in this view) and underneath is the battery caddy , holding 8 x AA batteries. 2 KEYHOLD Use this button to avoid any accidental operation during recording. Each time you press the button for more than two seconds, the hold function changes from ‘Key Hold ON’ to ‘Key Hold OFF? ...

  • HHB comm HHB MDP500 - page 7

    1 BA TTERY COMPARTMENT This cover slides off (from right to left in this view) and underneath is the battery caddy , holding 8 x AA batteries. 2 KEYHOLD Use this button to avoid any accidental operation during recording. Each time you press the button for more than two seconds, the hold function changes from ‘Key Hold ON’ to ‘Key Hold OFF’ ...

  • HHB comm HHB MDP500 - page 8

    8 SIDE P ANELS PORT ADISC MDP500 MiniDisc Recorder 31 PHONES SOCKET 1/4" jack socket for headphone connection. 32 LINE OUT LEFT AND RIGHT CONNECTORS (Unbalanced RCA phono.) T o send analog output signals to other equipment. 33 COAXIAL I/O CONNECTORS (Unbalanced RCA phono.) SPDIF digital coaxial connectors. 34 MIC/LINE CONNECTORS (Balanced XLR. ...

  • HHB comm HHB MDP500 - page 9

    9 LCD DISPLA Y PORT ADISC MDP500 MiniDisc Recorder 42-3 LEVEL INDICA TOR The bar meter shows the audio level in playback and record. (42) left hand channel (43) right hand channel. 44 RECORD/PLA YBACK MODE INDICATOR The icons indicate pause, play and record modes. 45 DISPLA Y MODE INDICATOR Displays the track number , record/play time, remaining ti ...

  • HHB comm HHB MDP500 - page 10

    AC ADAPTOR Use the AC mains power supply to operate the PORT ADISC by connecting the standard accessory AC adaptor (universal voltage 100-240 V AC) to the DC input connector . Y ou can also use the AC adaptor to charge the rechargeable batteries within the recorder . If the rechargeable batteries are loaded and the charge switch, which is located o ...

  • HHB comm HHB MDP500 - page 11

    AC ADAPTOR Use the AC mains power supply to operate the PORT ADISC by connecting the standard accessory AC adaptor (universal voltage 100-240 V AC) to the DC input connector . Y ou can also use the AC adaptor to charge the rechargeable batteries within the recorder . If the rechargeable batteries are loaded and the charge switch, which is located o ...

  • HHB comm HHB MDP500 - page 12

    CONNECTING MICROPHONES TO THE XLR INPUT If you use a stereo microphone, connect it to the XLR mic inputs. If you use a single microphone, connect it to either the left or right XLR mic input. (See page 15 for fur ther information about recording from a microphone and page 17 for information about mono recording.) If you use a microphone that requir ...

  • HHB comm HHB MDP500 - page 13

    CONNECTING MICROPHONES TO THE XLR INPUT If you use a stereo microphone, connect it to the XLR mic inputs. If you use a single microphone, connect it to either the left or right XLR mic input. (See page 15 for fur ther information about recording from a microphone and page 17 for information about mono recording.) If you use a microphone that requir ...

  • HHB comm HHB MDP500 - page 14

    PREP ARA TION cont. PORT ADISC MDP500 MiniDisc Recorder DISPLA Y BACK LIGHT Press LIGHT to turn on the display back light for 5 seconds or , if you press and hold the LIGHT button, the light will stay on permanently . NOTE – W e recommend minimal use of the display light when the PORT ADISC is powered by batteries. This will maximise battery life ...

  • HHB comm HHB MDP500 - page 15

    15 RECORDING PORT ADISC MDP500 MiniDisc Recorder 1. Press the INPUT button once to recall ‘SOURCE’ mode in order to select the correct input source settings. 2. Press F1 and F3 to choose ‘MIC’. Then press F2 to confirm. Y ou can select the input source for both left and right channels individually: SOURCE mode Input source setting for left ...

  • HHB comm HHB MDP500 - page 16

    16 1. Press the INPUT button once to recall ‘SOURCE’ mode. 2. Press F1 and F3 to choose ‘LINE’. Then press F2 to set-up. Once your input source is selected as ‘LINE’, the limiter setting will also be available by pressing INPUT . See the previous section for fur ther details about the limiter function. 1. Press the INPUT button once to ...

  • HHB comm HHB MDP500 - page 17

    17 16 • RECORD Star t recording • PAUSE , RECORD Record pause followed by PAUSE Start recording 4. Adjust the recording levels so that the peak level meters do not go beyond 0dB (marked ‘OVR’ in the top right of the diagram below). If the recording level goes above 0dB, distor tion to the recorded material may occur . 5. Press the STOP butt ...

  • HHB comm HHB MDP500 - page 18

    19 18 RECORDING cont. PORT ADISC MDP500 MiniDisc Recorder AUTO INCREMENT FUNCTION The function enables new tracks to be created automatically during recording. 1. Press SYSTEM until ‘TRACK-INCREMENT?’ is displayed. 2. Press F1 to choose the auto increment setting from ‘AUTO’ or ‘MANUAL ’. Then press F2 to set-up and F3 to exit. If set t ...

  • HHB comm HHB MDP500 - page 19

    19 AUTO INCREMENT FUNCTION The function enables new tracks to be created automatically during recording. 1. Press SYSTEM until ‘TRACK-INCREMENT?’ is displayed. 2. Press F1 to choose the auto increment setting from ‘AUTO’ or ‘MANUAL ’. Then press F2 to set-up and F3 to exit. If set to ‘AUTO’, a new track will be created if the input ...

  • HHB comm HHB MDP500 - page 20

    1. Load the MD disc to be used for playback into the disc opening. 2. Press the PLA Y button to star t playback. 3. Press the PAUSE or STOP buttons to pause or stop playback. 4. During playback, press the AMS button once to locate the beginning of the next track. Press the AMS button once to locate the beginning of the current track. If you repeate ...

  • HHB comm HHB MDP500 - page 21

    21 EDITING PORT ADISC MDP500 MiniDisc Recorder The PORT ADISC operates in four editing modes – erase, divide, combine and move. In addition, you can also label a disc or individual tracks. These different editing modes enable you to: • go to a par ticular point in the middle of a track instantly , • combine two tracks together to make them in ...

  • HHB comm HHB MDP500 - page 22

    3. The display will repeatedly show the following messages one after another: The PORT ADISC will playback the audio at the dividing point repeatedly . If the audio plays from the correct point, skip to point 5 in this list. 4. It is possible to adjust the divide point in 0.06 second steps by pressing either the FF button or REW buttons repeatedly ...

  • HHB comm HHB MDP500 - page 23

    23 2. Press the F1 button until the track number that you want to move is displayed. Then, press the F3 button to choose the destination track number of the move function. In the example given in point 1, ‘TRK003’ will move to the ‘TRK002’ position. 3. Press the F2 button to move the track. 4. Once the move function has been completed, ‘C ...

  • HHB comm HHB MDP500 - page 24

    OTHER FUNCTIONS PORT ADISC MDP500 MiniDisc Recorder 24 1. Press the SYSTEM button until ‘HEADPHONE MONITOR’ is recalled. 2. Press F1 to select from ‘STEREO’, ‘MONO-L ’, ‘MONO-R’ or ‘BOTH’ and then press F2 to confirm. Press F3 to exit. The digital output on the PORT ADISC can be switched of f, preventing digital howlround when c ...

  • HHB comm HHB MDP500 - page 25

    Universal Serial Bus (USB) audio transfer is provided for easy exchange of audio with a compatible computer . The format of the transfer is streaming audio – the software you are using on the computer will control the stored file format of the audio data. The PORT ADISC will automatically star t any required software installation when connected v ...

  • HHB comm HHB MDP500 - page 26

    MENU OPERA TION PORT ADISC MDP500 MiniDisc Recorder These diagrams show the basic menu operations. Changing a page displays the current settings, with the three functions keys ( F1 , F2 and F3 ) selecting the parameters. When a parameter is flashing, pressing ‘SET’ will action this choice. 27 26 ...

  • HHB comm HHB MDP500 - page 27

    27 PDISC_OP.QXD 6/11/00 12:44 pm Page 28 ...

  • HHB comm HHB MDP500 - page 28

    28 Before you seek advice from an HHB authorised dealer , follow the instructions below if you find any faults during operation: NOT POWERING UP • Replace batteries or recharge them. • Check the battery polarity and batter y case installation. • Check connection of the AC adaptor , mains plug and DC plug. • Remove the battery case and insta ...

  • HHB comm HHB MDP500 - page 29

    The MD has a different recording system from compact cassette or DA T . Because of this, there may be circumstances when the following situations occur during operation. It should be noted that these are not faults. • ‘Disc Full!’ message is showing although there still seems to be enough recordable time remaining. The MD disc cannot record m ...

  • HHB comm HHB MDP500 - page 30

    NOTES PORT ADISC MDP500 MiniDisc Recorder 30 PDISC_OP.QXD 6/11/00 12:44 pm Page 31 ...

  • HHB comm HHB MDP500 - page 31

    NOTES PORT ADISC MDP500 MiniDisc Recorder 31 30 TECHNICAL DA T A PORT ADISC MDP500 MiniDisc Recorder GENERAL Format . . . . . . . . . . . . . . . . . . . MiniDisc digital audio system Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MiniDisc Recording method . . . . . . . . Magnetic field variation over write Reading method ...

  • HHB comm HHB MDP500 - page 32

    V isit HHB online at www .hhb.co.uk HHB Communications Ltd · 73-75 Scrubs Lane, London NW10 6QU, UK T el: 020 8962 5000 · Fax: 020 8962 5050 · E-Mail: sales@hhb.co.uk HHB Communications USA LLC · 1410 Centinela A venue, Los Angeles, CA 90025-2501, USA T el: 310 319 1111 · Fax: 310 319 1311 · E-Mail: sales@hhbusa.com HHB Communications Canada ...

メーカー HHB comm カテゴリー CD Player

HHB comm HHB MDP500のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HHB MDP500の取扱説明書
- HHB commの製品カード
- パンフレット
- またはHHB comm HHB MDP500の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、HHB comm HHB MDP500の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、HHB comm HHB MDP500の取り付け説明書、サービスマニュアル、簡易説明書、またはHHB comm HHB MDP500のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、HHB comm HHB MDP500の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

HHB comm HHB MDP500デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHHB comm HHB MDP500を使用するのを助ける技術的文書のことです。説明書は通常、全てのHHB comm HHB MDP500ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

HHB commの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. HHB comm HHB MDP500の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHHB comm HHB MDP500の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。HHB comm HHB MDP500に関してこのドキュメントで見つけることができる全てのヒントの目次
3. HHB comm HHB MDP500デバイスの基本機能を使うにあたってのヒント。 HHB comm HHB MDP500のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。HHB comm HHB MDP500に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHHB comm HHB MDP500のメーカー/サービスへの連絡先に関する情報。

HHB comm HHB MDP500についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHHB comm HHB MDP500の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHHB comm HHB MDP500で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)