-
Belkin P73851-B - page 1
Belkin Wireless USB Network Adapter User Manual Macintosh OS 9.xVersion P73851 - B F5D6050 ver. 2 ...
-
Belkin P73851-B - page 2
Introduction Thank You for purchasing the Belkin Wireless USB Network Adapter (the Adapter). Now you can take advantage of th is great new technology and gain the freedom you need around the home or office without using cables. The Wireless USB Network Adapter works like a conventional network Adapter, but without the wires. The easy installation a ...
-
Belkin P73851-B - page 3
Knowing your Belkin Wireless USB Network Adapter 1. USB “B” socket Statu s Light Indicates network activity and power Adjustable Antennas ...
-
Belkin P73851-B - page 4
Placing the Belkin Wireless USB Network Adapter A six - foot USB c able is provided with the Adapter to allow you to place it as high as possible. The best location is on top of your computer’s monitor. Placing the Adapter on your desktop is acceptable, however, avoid placing the adapter near metal objects such as a compu ter case or speakers. An ...
-
Belkin P73851-B - page 5
6. After the software installation is finished, the message will appear “Installation was successful. You must now restart your computer to use your new softwa re”. Click Restart. While the computer is rebooting, plug the USB cable into the adapter and connect it to an available USB port on your PC or USB hub. Step 2: Connect the Adapter to you ...
-
Belkin P73851-B - page 6
2. Click o n the Apple Menu and select Control Panel. In the Control Panel select the TCPIP Control Panel. In the Connect Via drop down list select “Belkin USB Wireless Driver 11”. Configure your TCPIP Settings to match your network. Please contact your system adm inistrator for these settings. Click on the close box and then click on Save. ...
-
Belkin P73851-B - page 7
Connecting to your wireless network If you already have a wireless router or an access point in your home or office, the Adapter will automatically attempt to connect to your wireless network. In most cases, the Adapter will be able to connect to your network automatically. If your wireless network is using encryption, you will need to set the encr ...
-
Belkin P73851-B - page 8
Using the Belkin Wireless LAN Monitor Utility T o run the Belkin Wireless LAN Monitor Utility, click on the Apple Menu. Click on Control Panel and select Belkin USB_Setup. When you launch the Wireless LAN Monitor Utilty (the Utility), you will be presented with the screen below. The Configuration Screen (a) Network Mode Shows the current wireless m ...
-
Belkin P73851-B - page 9
wirele ss network in the area. To connect to a specific wireless network, you can manually enter the SSID of the known wireless network. Note that the SSID is case - sensitive, so, capital letters do make a difference. To change the SSID, click in the Network SSID field, type the SSID you want, then click “Apply”. (d) PS Mode (Power Save) Enabl ...
-
Belkin P73851-B - page 10
The Site Survey Screen Clicking on the Site Survey radio button will display a list of all available access points in your area. The following information about each is displayed: (a) BSSID – The MAC address of the access point (b) SSID – The Service Set Identifier (wireless network name) of the access point. (c) Channel number – The current ...
-
Belkin P73851-B - page 11
The Encryption Tab The encryption tab is used to set up the wireless encryption settings. There are two ways to set up the encryption settings of your Adapter. Create with Passphrase or Manual Entry . Select 64 - bit from the drop - down me nu. You will notice when using 64 - bit encryption there are four keys labeled “Key 1” through “Key 4? ...
-
Belkin P73851-B - page 12
2. Select “Create with Passphrase” (b) . [passphrase.tif] 3. Enter a Passphrase and click “A pply”. Clicking “Apply” will generate four keys if you choose 64 - bit or 1 key if you choose 128 - bit. 4. You can now select which 64 - bit key you want to use from the ”Use WEP Key” (c) drop - down menu. Leave this set to “1” unless y ...
-
Belkin P73851-B - page 13
Operating in Ad - Hoc/Peer - to - Peer Mode Ad - Hoc mode is a peer - to - peer mode (computer - to - computer). To set two or more computers to communicate directly with each other, follow these steps. 1. ` Select “Peer - to - Peer” from the Mode box. (a) 2. Enter the channel you want to use in the “Channel” box. (b) You can choose any one ...
-
Belkin P73851-B - page 14
Technical Support You can find technical support information at www.networking.belkin.com or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call 800 - 223 - 5546. Technical support is available 24 hours a day, 7 days a week. ...
Belkin P73851-Bについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもBelkin P73851-Bの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBelkin P73851-Bで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。