Lenovo Types 8380の取扱説明書

44ページ 0.92 mb
ダウンロード

ページに移動 of 44

Summary
  • Lenovo Types 8380 - page 1

    Hard w ar e Rep l ac e m ent Gu i d e Ty p e s 82 88 , 82 9 7 , 83 2 6 Ty p e s 83 2 9 , 8 342, 83 8 0 ...

  • Lenovo Types 8380 - page 2

    ...

  • Lenovo Types 8380 - page 3

    Hard w ar e Rep l ac e m ent Gu i d e Ty p e s 82 88 , 82 9 7 , 83 2 6 Ty p e s 83 2 9 , 8 342, 83 8 0 ...

  • Lenovo Types 8380 - page 4

    First Edition (November 2005) © Copyright Lenovo 2005. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services ar e provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contr ...

  • Lenovo Types 8380 - page 5

    Contents Overview . . . . . . . . . . . . . .v Safety information for replacing CRUs . . . . . .v Safety information for replacing FRUs . . . . . .v Additional information resour ces . . . . . . .v i T ools requir ed . . . . . . . . . . . . .v i Handling static-sensitive devices . . . . . . .v i Chapter 1. Locations . . . . . . . . .1 Locating comp ...

  • Lenovo Types 8380 - page 6

    iv Hardwar e Replacement Guide ...

  • Lenovo Types 8380 - page 7

    Overview This guide is intended to be used by customers who are r eplacing Customer Replaceable Units (CRUs) as well as trained service personnel who are r eplacing Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referr ed to as parts. Note: T rained service personnel should refer to the Hardwar e Maintenance Manual (HMM) ...

  • Lenovo Types 8380 - page 8

    Additional information resources If you have Internet access, the most up-to-date information for your computer is available from the W orld W ide W eb. Yo u can find the following information: v CRU removal and installation information v Publications v T r oubleshooting information v Parts information v Downloads and drivers v Links to other usefu ...

  • Lenovo Types 8380 - page 9

    Chapter 1. Locations This chapter provides illustrations to help locate the various connectors, contr ols and components of the computer . To remove the computer cover , see “Removing the computer cover” on page 5. Locating components The following illustration will help you locate the various components in your computer . 1 Micropr ocess ...

  • Lenovo Types 8380 - page 10

    Locating connectors on the front of the computer The following illustration shows the location of connectors on the front of the computer . 1 USB connector 3 Headphone connector 2 USB connector 4 Microphone connector 2 Hardwar e Replacement Guide ...

  • Lenovo Types 8380 - page 11

    Locating connectors on the rear of the computer The following illustration shows the location of connectors on the rear of the computer . 1 Power supply diagnostics LEDs 9 USB connectors (2) 2 V oltage selection switch 10 Ethernet connector 3 Power connector 11 USB connectors (2) 4 Standard mouse connector ...

  • Lenovo Types 8380 - page 12

    Identifying parts on the system board The system board (sometimes called the planar or motherboard ) is the main cir cuit board in your computer . It pr ovides basic computer functions and supports a variety of devices. The following illustration shows the locations of parts on the system board. 1 Micropr ocessor 11 Clear CMOS/Recovery ...

  • Lenovo Types 8380 - page 13

    Chapter 2. Replacing hardware Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site ...

  • Lenovo Types 8380 - page 14

    5. Remove the two screws on the right side cover , slide the cover to the r ear , and remove. 6 Hardwar e Replacement Guide ...

  • Lenovo Types 8380 - page 15

    Removing and replacing the front bezel To remove and replace the fr ont bezel: 1. Remove the computer cover . See “Removing the computer cover” on page 5. 2. Remove the front bezel by r eleasing the three plastic tabs inside the chassis and push the bezel outward as shown. 3. To reinstall the bezel, align the plastic tabs on the bottom of the b ...

  • Lenovo Types 8380 - page 16

    Replacing the power supply Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site at ...

  • Lenovo Types 8380 - page 17

    Replacing the system board assembly Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We ...

  • Lenovo Types 8380 - page 18

    8. Remove the heat sink 1 from the system boar d by removing the four screws. Then, carefully lift up the heat sink of f the mounting brackets. Place the heat sink on its side on a clean, flat surface so the thermal material on the bottom of the heat sink does not touch the surface and become contaminated. 9. Release the lever 3 holding ...

  • Lenovo Types 8380 - page 19

    10. Using the vacuum pen 1 , remove the micr oprocessor from the system boar d socket by lifting it straight up and out of the socket. Important Do not touch the gold contacts on the bottom of the micropr ocessor . If you must touch the micropr ocessor , touch only the sides. Notes: a. Note the orientation of the notches 1 on the microp ...

  • Lenovo Types 8380 - page 20

    11 . On the new system board, r elease and pivot the locking lever , then pivot the micropr ocessor retainer until it is open. Note: There will be a black plastic cover on the r etainer to protect the micropr ocessor socket. As you close the microprocessor r etainer , remove the black plastic cover . Place the black plastic cover on the micropr oce ...

  • Lenovo Types 8380 - page 21

    15. Install the four screws 1 to secur e the heat sink. 16. Install the new system board assembly into the computer chassis, align the screw holes, and install the scr ews. Note: Use only the screws pr ovided by Lenovo. 17. Reconnect all cables that were disconnected fr om the system board. Make sure all cables are r outed correctly . See “ ...

  • Lenovo Types 8380 - page 22

    Replacing the microprocessor Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site ...

  • Lenovo Types 8380 - page 23

    3. Remove the heat sink 1 from the system boar d by removing the four screws. Then, carefully lift up the heat sink of f the mounting brackets. Place the heat sink on its side on a clean, flat surface so the thermal material on the bottom of the heat sink does not touch the surface and become contaminated. 4. Release the lever 3 holding ...

  • Lenovo Types 8380 - page 24

    5. Using the vacuum pen 1 , remove the micr oprocessor from the system boar d socket by lifting it straight up and out of the socket. Important Do not touch the gold contacts on the bottom of the micropr ocessor . If you must touch the micropr ocessor , touch only the sides. Notes: a. Note the orientation of the notches 1 on the micropr ...

  • Lenovo Types 8380 - page 25

    6. On the system board, r elease and pivot the locking lever , then pivot the micropr ocessor retainer until it is open. 7. Loosen the protective cover 3 that pr otects the gold contacts on the new micropr ocessor 2 but do not remove it. Use the vacuum pen 1 to pick up the micropr ocessor then completely remove the protective cove ...

  • Lenovo Types 8380 - page 26

    10. Use the thermal grease syringe to place five dr ops of grease on the top of the micropr ocessor . Each drop of gr ease should be 0.03ml (3 tick marks on the grease syringe). 11 . Position the heat sink on the heat sink mounting bracket and align the four holes of the heat sink with the holes on the system board. 12. Install the four screws 1 ...

  • Lenovo Types 8380 - page 27

    Replacing a memory module Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site at ...

  • Lenovo Types 8380 - page 28

    Replacing an adapter Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site at http: ...

  • Lenovo Types 8380 - page 29

    3. Install the new adapter into the same adapter connector . 4. Ensure the adapter is fully seated into the adapter connector . 5. At the rear of the computer , align the scr ew hole and install the screw to secure the adapter . 6. Go to “Completing the installation” on page 29. Replacing the hard disk drive Attention: Do not remove the compute ...

  • Lenovo Types 8380 - page 30

    Important When you receive a new har d disk drive, you will also receive a set of Product Recovery CD . The set of Pr oduct Recovery CD will enable you to restore the contents of the hard disk to the same state as when your computer was originally shipped from the factory . For more information on r ecovering factory-installed software, r efer to ? ...

  • Lenovo Types 8380 - page 31

    Replacing an optical drive Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site at ...

  • Lenovo Types 8380 - page 32

    Replacing the diskette drive Attention: Do not remove the computer cover or attempt any r epair before reading the “Important safety information” in the Quick Reference that was included with your computer or in the Hardware Maintenance Manual (HMM) for the computer . To obtain copies of the Quick Reference or HMM , go to the Support We b site ...

  • Lenovo Types 8380 - page 33

    5. Slide the new diskette drive into the drive bay so that the screw holes align with those in the drive bay . 6. Install the two screws to secur e the diskette drive. 7. Go to “Completing the installation” on page 29. Replacing the system fan assembly Attention: Do not remove the computer cover or attempt any r epair before reading the “Impo ...

  • Lenovo Types 8380 - page 34

    4. Remove the four screws that secur e the system fan assembly at the rear of chassis. 5. Lift the system fan assembly out of chassis. 6. Install the new system fan assembly into the chassis so that the screw holes in the system fan assembly align with those in the chassis. 7. Install the four screws to secur e the system fan assembly . Note: Use o ...

  • Lenovo Types 8380 - page 35

    4. Remove the screw that secur es the front audio/USB panel card and lift the front audio/USB panel car d out of the lower slot. 5. Insert bottom of the new front audio/USB panel in the lower slot. 6. Align the front audio/USB panel with the scr ew hole. 7. Install the screw to secur e the front audio/USB panel. 8. Go to “Completing the installat ...

  • Lenovo Types 8380 - page 36

    Note: Y our keyboar d might be connected to the standard keyboar d connector 1 at the rear of the computer or to a USB connector 2 at either the fr ont or rear of the computer . 4. Disconnect the failing keyboard cable fr om the computer and connect the new keyboard cable to the same connector . 5. Go to “Completing the installation? ...

  • Lenovo Types 8380 - page 37

    2. Locate the internal speaker 1 . 3. Locate the internal speaker connector , see “Identifying parts on the system board” on page 4. 4. Disconnect the speaker cable from the system boar d. 5. Remove the speaker by sliding it upward and out of the r etaining bracket. 6. Install the new speaker . 7. Go to “Completing the installation.” ...

  • Lenovo Types 8380 - page 38

    3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed and install the screws. 4. If a cover lock is installed, lock the cover . 5. Reconnect the external cables and power cords into the computer . See “Locating connectors on the front of the ...

  • Lenovo Types 8380 - page 39

    Updating (flashing) BIOS from a diskette or CD-ROM Important Start the Setup Utility program to view your system information. See “Starting the Setup Utility” in your Quick Reference or in the Hardwar e Maintenance Manual . If the serial number and the machine type/model listed on the Main menu do not match what is printed on the label of your ...

  • Lenovo Types 8380 - page 40

    32 Hardwar e Replacement Guide ...

  • Lenovo Types 8380 - page 41

    Appendix. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, program, or service is not intended to state or imply that only that Le ...

  • Lenovo Types 8380 - page 42

    vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data ...

  • Lenovo Types 8380 - page 43

    ...

  • Lenovo Types 8380 - page 44

    Part Number: 41D4474 Printed in USA (1P) P/N: 41D4474 ...

メーカー Lenovo カテゴリー Personal Computer

Lenovo Types 8380のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Types 8380の取扱説明書
- Lenovoの製品カード
- パンフレット
- またはLenovo Types 8380の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Lenovo Types 8380の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Lenovo Types 8380の取り付け説明書、サービスマニュアル、簡易説明書、またはLenovo Types 8380のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Lenovo Types 8380の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Lenovo Types 8380デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがLenovo Types 8380を使用するのを助ける技術的文書のことです。説明書は通常、全てのLenovo Types 8380ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Lenovoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Lenovo Types 8380の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははLenovo Types 8380の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Lenovo Types 8380に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Lenovo Types 8380デバイスの基本機能を使うにあたってのヒント。 Lenovo Types 8380のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Lenovo Types 8380に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるLenovo Types 8380のメーカー/サービスへの連絡先に関する情報。

Lenovo Types 8380についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもLenovo Types 8380の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがLenovo Types 8380で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)