-
Brocade Communications Systems 6720 - page 1
53-1 002085-02 15 D ec em be r , 2 0 11 ® 53-1 002085-02 *53-1002085-02* Brocade VDX 6720 QuickStar t Guide Supporting the VDX 6720-24 and VDX 6720-60 ...
-
Brocade Communications Systems 6720 - page 2
2 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 Copyright © 20 10 Brocade Communications Systems, Inc. All Rights Reser ved. Broc ade, the B-wing symbol , BigIron, DC FM, DCX, Fabri c OS, Fast Iron, Ir onView , NetIr on, SAN Health, ServerI ron, T urb oIron and W ingspa n are registe red trademarks, and Br ocade Assura ...
-
Brocade Communications Systems 6720 - page 3
Brocade VDX 6720 QuickSt art Guide 3 of 12 Publication Number: 53-1002085-02 Overview This Quick Star t guide is intended as an o ver vie w to help e xperienced installers unpack, install, and configure the Brocade VDX 6720 q uickly. F or more detailed inst allation and configuratio n instructions , see the Brocade Network OS Administrat or’s Gui ...
-
Brocade Communications Systems 6720 - page 4
4 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 . Environmental considerations For successful installati on and operation of the switch, ensure that the follo wing en vir onmental requirements are met: • Because the Br ocade VDX 6720 can be o rdered with f ans that ei th er mov e ai r f ron t to ba c k or ba ck to fro ...
-
Brocade Communications Systems 6720 - page 5
Brocade VDX 6720 QuickSt art Guide 5 of 12 Publication Number: 53-1002085-02 Recommendations for cable management The minimum ben d radius f or a 50 micron cable is 2 inches under full tensile load and 1.2 inches with no te nsile load. Cables can be organized and managed in a variety of wa ys , for e xample, using cable channels on the sides of the ...
-
Brocade Communications Systems 6720 - page 6
6 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 ATTENTION Do not connect the switc h to the network until the IP addres s is correctly set. F or instru ctions on how t o set the IP address, see “Set ting the switch IP address.” Rack installation for a Brocade VDX 6720 Fol low the instal lation instructions shi pped ...
-
Brocade Communications Systems 6720 - page 7
Brocade VDX 6720 QuickSt art Guide 7 of 12 Publication Number: 53-1002085-02 1. Connect the serial cable to the serial port on the swit ch and t o an RS-232 serial por t on the workstation or ter mi na l d evic e. If the serial port on the workstation or terminal device is RJ45 instead of RS-232 , remove the adapt er on the end of the serial cable ...
-
Brocade Communications Systems 6720 - page 8
8 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 Setting the switch IP address Y ou can configure the Brocade VDX 6720 with a static IP address, or you can use a DHCP (Dynamic Host Configuration Pro tocol) server t o set the IP address of the switch. DHCP is enabled by default. The Brocade VDX 6720 suppor ts both IPv4 an ...
-
Brocade Communications Systems 6720 - page 9
Brocade VDX 6720 QuickSt art Guide 9 of 12 Publication Number: 53-1002085-02 Another parameters that can be changed if necessar y is the V CS ID. This identifies the V CS fabric of which the switch can be a part. By default, the V CS of ev er y VDX 672 0 is 1. Change the V CS ID if you need to create a new , separate V CS fabric. If y ou need to ch ...
-
Brocade Communications Systems 6720 - page 10
10 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 1. Remov e any prot ector plugs from the tran sceiv er s and the por ts. 2. Making sure that t he bail (wire handle) is in the unlo ck ed position, place the transcei v er in the correctly oriented position on the port, as shown in Figure 1 . 3. Slide the SFP+ into the po ...
-
Brocade Communications Systems 6720 - page 11
Brocade VDX 6720 QuickSt art Guide 11 of 12 Publication Number: 53-1002085-02 FIGURE 2 Inser ting a cable into an SFP+ Connecting to Ethernet or fast Ethernet hubs For copper connections t o Ethernet hu bs, a 1 0/1 00Base- TX or 1000Base- T switch, or another Brocade de vice, a crosso ver cable is required. If the hub is equipped with an uplink por ...
-
Brocade Communications Systems 6720 - page 12
12 of 12 Brocade VDX 6720 QuickSt art Guide Publication Number: 53-1002085-02 ...
Brocade Communications Systems 6720についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもBrocade Communications Systems 6720の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBrocade Communications Systems 6720で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。