Impex MWM-1840の取扱説明書

29ページ 5.06 mb
ダウンロード

ページに移動 of 29

Summary
  • Impex MWM-1840 - page 1

    NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Resistance Chart Warranty Ordering Parts Model MWM-1840 Retain This Manual for Reference 101015 OWNER'S MANUAL MARCY ® MWM-1840 HOME GYM IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 9 ...

  • Impex MWM-1840 - page 2

    TABLE OF CONTENTS BEFORE YOU BE GIN....................................................................................……….. 1 IMPORTANT SAFETY NOTICES ...................................................................……….. 2 HARDWARE IDENTI FIER.....…..................................................................... ……….. 4 ...

  • Impex MWM-1840 - page 3

    IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipm ent. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the ma ...

  • Impex MWM-1840 - page 4

    WARNING LABEL PLACEMENT The w arning labels show n here have been placed on the Middle Stabilizer and Upper Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location show n. 3 ...

  • Impex MWM-1840 - page 5

    HARDWARE PACK NOTE: The follow ing parts are not draw n to scale. Please use your own ruler to measure the size. 4 ...

  • Impex MWM-1840 - page 6

    HARDWARE PACK NOTE: The follow ing parts are not draw n to scale. Please use your own ruler to measure the size. 5 ...

  • Impex MWM-1840 - page 7

    HARDWARE PACK NOTE: The follow ing parts are not draw n to scale. Please use your own ruler to measure the size. 6 ...

  • Impex MWM-1840 - page 8

    ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Place the Middle Stabilizer (#2) on flat surface. B.) Attach the Base Frame (#3) to the fr ont of Mi ...

  • Impex MWM-1840 - page 9

    STEP 2 (See Diagram 2) A.) Insert the two Guide Rods (#11) into the holes on the Middle Stabilizer (#2). Secure each Guide Rod with one M10 x 1” Allen Bolt (#81) and two  ¾” Washers (#91) from the bottom. Slide two Ø 2 ¼” x 1” Guide Rod Rubber Bumpers (#39) onto the two Guide Rods from top to bottom. B.) Do not tighten all Nuts and Bo ...

  • Impex MWM-1840 - page 10

    DIAGRAM 2 9 ...

  • Impex MWM-1840 - page 11

    STEP 3 (See Diagram 3) A.) Slide 14 Weight Plates ( #42) onto the Guide Rods (#11). Make sure the deep grooves on the Weight Plates all face the back of the machine and downw ard. B.) Align the holes on the Weight Plates. Insert a Selector Rod (#21) through the center hole. Slide the Selector Stem (#41) onto the Guide Rods. C.) Use the Weight Selec ...

  • Impex MWM-1840 - page 12

    STEP 4 (See Diagram 4) A.) Place the Upper Frame (#1) onto the Vertical Frame (#4). B.) Attach the brackets on the Upper Frame to the two Guide Rods. Secure the Guide Rods to the brackets with two M10 x 1” Allen Bolts (#81) and Ø ¾” Washers (#91). C.) Secure the Upper Frame to the Power Stati on Vertical Frame (#26) with two M10 x 2 3/8” Ca ...

  • Impex MWM-1840 - page 13

    DIAGRAM 4 12 ...

  • Impex MWM-1840 - page 14

    STEP 5 (See Diagram 5) A.) Attach the Front Press Base (#8) to the Upper Frame (#1). Secure it with one 8 ½” Front Press Axle (#19), two Ø 1” Large Washers (#96), and two M10 Aircraft Nuts (#97). Do not over tighten the Nuts. B.) Insert the axle on the Left Butterfly (#9) th rough the open hole on Front Press Base from bottom. Secure it with ...

  • Impex MWM-1840 - page 15

    DIAGRAM 5 14 ...

  • Impex MWM-1840 - page 16

    STEP 6 (See Diagram 6) A.) Attach the Left Dip Support (#28) into Ri ght Dip Support (#27) behind the Power Station Vertical Frame (#26). B.) Attach the holes on the bracket of Left & Right Dip Support to the hole on the Vertical Frame. Align the holes. Secure the Left & Right Dip Support, and the Vertical Frame together with one M10 x 4 7/ ...

  • Impex MWM-1840 - page 17

    DIAGRAM 6 16 ...

  • Impex MWM-1840 - page 18

    STEP 7 (See Diagram 7) A.) Attach one Swivel Pulley Bracket (#17) to the open bracket on the back of Vertical Frame (#4). Secure it with one M10 x 2 ½” A llen Bolt (#76), two Ø ¾” Washers (#91), and one M10 Aircraft Nut (#97) . Do not over tighten the Nut and Bolt. Make sure the Swivel Pulley Bracket can swivel freely. B.) Repeat Procedure A ...

  • Impex MWM-1840 - page 19

    STEP 8 (See Diagram 8) A.) Attach the Power Station Arm Pads (#35) to the Right & Left Dip Support (#27 & #28). Secure each Arm Pad with two M8 x 2 ¾” A llen Bolts (#84) and two Ø 5/8” x 1” Curved Washers (#94). B.) Attach two Vertical Handles (#13) to Ri ght & Left Dip Support. Secure each Handle to each Support with one M10 x ...

  • Impex MWM-1840 - page 20

    STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach the 127 ½” Upper Cable (#56) to the front open bracket under the Upper Frame (#1). B.) Attach a Pulley (#40) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#74), two Ø ¾” Washers (#91), and one M10 Aircraft Nut (#97). C.) Draw the Cable under the Upper Frame towards the ...

  • Impex MWM-1840 - page 21

    DIAGRAM 9 20 ...

  • Impex MWM-1840 - page 22

    STEP 10 (See Diagram 10 & Cable Loop Diagram) A.) Hook one end of the 98” Butterfly C able (#57) to Right Butterfly (#10). B.) Draw the Cable towards the right open Swivel Pulley Bracket (#17). C.) Attach a Pulley (#40) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#74), two  ¾” Washers (#91), and one M10 Aircraft Nut (#9 ...

  • Impex MWM-1840 - page 23

    STEP 11 (See Diagram 11 & Cable Loop Diagram) A.) Attach the 159” Lower Cable (#58) to the opening bracket on Leg Developer (#7). B.) Attach a Pulley (#40) to the opening. Se cure it with one M10 x 2 ½” Allen Bolt (#76), two  1” x 5/8” Pulley Bushings (#52), and one M10 Aircraft Nut (#97). C.) Draw the Cable underneath the Pulley to ...

  • Impex MWM-1840 - page 24

    23 ...

  • Impex MWM-1840 - page 25

    STEP 12 (See Diagram 12) A.) Connect Lat Bar (#14) to the Upper Cable ( #56) with two Hooks (#63) and one 15-link Chain (#55) when doing Lat Pull exercises. B.) Connect Shiver Bar (#15) to the Lower Cabl e (#33) use the two Hooks and the 15-link Chain from Lat Bar when doing Arm Curl exercises C.) Replace Shiver Bar with the Ankle Strap (#66) or Si ...

  • Impex MWM-1840 - page 26

    Set up the Lock Combination A.) The combination is pre-se t to 0-0-0 by the factory. B.) Turn the dials to 0-0-0 and ali gned to the Combination Set Up Line. C.) Pull out the shackle and turn 180 0. D.) Press down on the shackle. E.) Turn the dials (aligned to the Combination Set Up Line) to your desired combination. F.) Pull out the shackle and tw ...

  • Impex MWM-1840 - page 27

    PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Upper Frame 1 51 Ø 1” x Ø ½” Bushing 2 2 Middle Stabilizer 1 52 Ø 1” x 5/8” Pulley Bushing 4 3 Base Frame 1 53 Combination Lock 1 4 Vertical Frame 1 54 2” Weight Plate Lock Pin 1 5 Seat Support 1 55 15-link Chain 1 6 Vertical Seat Support 1 56 127 ½” Upper Cable 1 7 Leg Developer 1 57 98” B ...

  • Impex MWM-1840 - page 28

    MWM1840 WEIGHT RESISTANCE CHART Weight Plate Leg Developer Front Press Butterfly Lat Pull Low Pulley 1 30 31 15 30 30 2 40 44 20 40 40 3 50 57 25 50 50 4 60 70 30 60 60 5 70 83 35 70 70 6 80 96 40 80 80 7 90 109 45 90 90 8 100 122 50 100 100 9 110 135 55 110 110 10 120 148 60 120 120 11 130 161 65 130 130 12 140 174 75 140 140 13 150 187 80 150 150 ...

  • Impex MWM-1840 - page 29

    IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two y ears on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is ...

メーカー Impex カテゴリー Fitness Equipment

Impex MWM-1840のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MWM-1840の取扱説明書
- Impexの製品カード
- パンフレット
- またはImpex MWM-1840の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Impex MWM-1840の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Impex MWM-1840の取り付け説明書、サービスマニュアル、簡易説明書、またはImpex MWM-1840のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Impex MWM-1840の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Impex MWM-1840デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがImpex MWM-1840を使用するのを助ける技術的文書のことです。説明書は通常、全てのImpex MWM-1840ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Impexの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Impex MWM-1840の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははImpex MWM-1840の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Impex MWM-1840に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Impex MWM-1840デバイスの基本機能を使うにあたってのヒント。 Impex MWM-1840のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Impex MWM-1840に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるImpex MWM-1840のメーカー/サービスへの連絡先に関する情報。

Impex MWM-1840についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもImpex MWM-1840の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがImpex MWM-1840で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)