-
Omega OS643 - page 1
OMEGA OS643 Infrared Thermometer ...
-
Omega OS643 - page 2
OMEGAnet SM On-Line Service http://www.omega.com Internet e-mail info@omega.com For immediate technical or application assistance: USA and Canada: Mexico and Latin America: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA SM Tel: (95) 800-TC-OMEGA SM Customer Service: 1-800-622-2378 / 1-800-622-BEST SM FAX: (95) 203-359-7807 Engineering Service: 1-80 ...
-
Omega OS643 - page 3
INTRODUCTION This instrument is a portable easy use 3½ digit, compact-sized digital infrared thermometer simple one hand operation. Meter with Backlit LCD display, Auto- hold function and auto power off (15 seconds approx.) feature after releasing MEAS button to extend battery life and with analog signal output function. SAFETY INFORMATION It is r ...
-
Omega OS643 - page 4
2 CAUTION • Do not use the unit near any device which generates strong electromagnetic radiation or near a static electrical charge, as these may cause errors. • Do not point the lens at the sun or at any other source of strong light. If you do, the sensor may be damaged. • Do not contact the lens against the object whose temperature is to be ...
-
Omega OS643 - page 5
SPECIFICATIONS GENERAL Display: 3½ digit liquid crystal display (LCD) with maximum reading of 1999. Overrange : (OL) or (-OL) is displayed. Low battery indication: the " " is displayed when the battery voltage drops below the operating level. Measurement rate: 2.5 times per second, nominal. Operating Environment: 32°F to 122°F (0°C to ...
-
Omega OS643 - page 6
4 ELECTRICAL Temperature Range: 0°F to 500°F / -20°C to 260°C. Display Resolution: 1°F / 1°C. Accuracy: ±3% of reading or ±6°F/3°C, whichever is greater @ 64.4 to 82.4°F (@ 18 to 28°C) ambient operating temperature. Temperature Coefficient: ±0.2% of reading or ±0.36°F/0.2°C, whichever is greater, change in accuracy per °F/°C chang ...
-
Omega OS643 - page 7
5 Spot size increases with distance from the probe tip as shown ...
-
Omega OS643 - page 8
6 OPERATING INSTRUCTIONS Push buttons Display Back-Light Button Release MEAS button then press " " button to toggle between turn on and turn off the Back-Light. When releasing MEAS button Back-Light will turn off auto- matically after 15 seconds to extend battery life. MEAS (MEASURE) Button Depress MEAS button to turn on the meter for mea ...
-
Omega OS643 - page 9
7 OPERATION 1. When the power is off, pressing the MEAS button turns on the power. 2. Use " " button to select turn on or turn off the display Back-Light. 3. Use "°F/°C" button to select °F or °C the Temperature Range. 4. Point the lens at the object whose temperature is to be measured. 5. Press the MEAS button. Measurement ...
-
Omega OS643 - page 10
8 MEASUREMENT CONSIDERATIONS 1. Theory of Measurement Every object emits infrared energy in accordance with its temperature. By measuring the amount of this radiant energy, it is possible to determine the temperature of the emitting object. 2. About Infrared Infrared radiation is a form of light (electromagnectic radiation), and has the property th ...
-
Omega OS643 - page 11
9 4. Emissivity All objects emit invisible infrared energy. The amount of energy emitted is proportional to the object's temperature and its ability to emit IR energy. This ability, called emissivity, is based upon the material that the object is made of and its surface finish. Emissivity values range from 0.10 for a very reflective object to ...
-
Omega OS643 - page 12
10 MAINTENANCE Battery Replacement Power is supplied by four 1.5V (AAA size) batteries. The " " appears on the LCD display when replacement is needed.To replace the batteries, remove the screw from the back of the meter and lift off the battery cover case. Remove the batteries from battery contacts. Cleaning Periodically wipe the case wit ...
-
Omega OS643 - page 13
Substance Thermal Substance Thermal emissivity emissivity Asphalt 0.90 to 0.98 Cloth (black) 0.98 Concrete 0.94 Human skin 0.98 Cement 0.96 Lather 0.75 to 0.80 Sand 0.90 Charcoal (powder) 0.96 Earth 0.92 to 0.96 Lacquer 0.80 to 0.95 W ater 0.92 to 0.96 Lacquer (matt) 0.97 Ic e 0.96 to 0.98 Rubber (black) 0.94 Snow 0.83 Plastic 0.85 to 0.95 Glass 0. ...
-
Omega OS643 - page 14
WARRANTY OMEGA warrants this unit to be free of defects in materials and workmanship and to give satisf actory ser vice for a period of 13 months from date of purchase. OMEGA W arranty adds an additional one (1) month grace period to the nor mal one (1) year product warranty to cov er handling and shipping time. This ensures that OMEGA's custo ...
-
Omega OS643 - page 15
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply . OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believ ed to be correct but OM ...
-
Omega OS643 - page 16
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA...Of Course! HEATERS þ Heating Cable þ Cartridge & Strip Heaters þ Immersion & Band Heaters þ Flexible Heaters þ Laboratory Heaters PRESSURE/STRAIN AND FORCE þ Transducers & Strain Gauges þ Load Cells & Pressure Gauges þ Displacement Transducers þ ...
Omega OS643についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもOmega OS643の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがOmega OS643で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。