-
Harbor Freight Tools 47612 - page 1
15 GAUGE AIR ANGLE NAILER 47612 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result in DEA TH or SERIOUS INJUR Y . SA VE THIS MANUA ...
-
Harbor Freight Tools 47612 - page 2
Page 2 SKU 47612 For technical questions, please call 1-800-444-3353. Specications Air Inlet 1/4” NPT Recommended Air Pressure 70 – 120 PSI * Nail Size Capacity 1-1/4” to 2-1/2” Long Nails Nail T ype 15 Gauge – 34° Magazine Capacity 100 Nails Safety Feature Full Sequential Contact T ip Overall Dimensions 15-1/4” x 10-3/4” x 3-5/8? ...
-
Harbor Freight Tools 47612 - page 3
Page 3 SKU 47612 For technical questions, please call 1-800-444-3353. Use the right tool for the job. 5. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do n ...
-
Harbor Freight Tools 47612 - page 4
Page 4 SKU 47612 For technical questions, please call 1-800-444-3353. tion. Any part that is damaged should be properly repaired or replaced by a quali- ed technician. Do not use the tool if the trigger does not operate properly . Guard against electric shock. 15. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and ...
-
Harbor Freight Tools 47612 - page 5
Page 5 SKU 47612 For technical questions, please call 1-800-444-3353. Rev 06k T ake caution, as some woods contain preservatives such as copper chromi- 25. um arsenate (CCA) which can be toxic. When stapling or nailing these materials extra care should be taken to avoid inhalation and minimize skin contact. W ARNING: Some dust created by power sand ...
-
Harbor Freight Tools 47612 - page 6
Page 6 SKU 47612 For technical questions, please call 1-800-444-3353. Unpacking When unpacking, check to make sure all parts shown in the Parts List on page 1 1 are in- cluded. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual as soon as possible. Operation For best service, you should i ...
-
Harbor Freight Tools 47612 - page 7
Page 7 SKU 47612 For technical questions, please call 1-800-444-3353. the tool res, stop immediately and have it repaired by a qualied service techni - cian. Depress the nose against the workpiece and squeeze the T rigger (47). 8. The tool must cycle (re) only once. Release the T rigger and squeeze it again. The tool must not cycle (re) ...
-
Harbor Freight Tools 47612 - page 8
Page 8 SKU 47612 For technical questions, please call 1-800-444-3353. Operating the Nailer A LWA Y S WEAR A NSI A PPRO VED IMP ACT SAF ETY GOG GLES WHE N RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles. Attach the Nailer to the air supply at the Air Inlet (57). ...
-
Harbor Freight Tools 47612 - page 9
Page 9 SKU 47612 For technical questions, please call 1-800-444-3353. Clearing Jams A LWA Y S WEAR A NSI A PPRO VED IMP ACT SAF ETY GOG GLES WHE N CLEARING JAMS OR DOING ANY OTHER MAINTENANCE ON THIS T OOL. Other people in the work area must also wear ANSI approved impact safety goggles. 1. Occasionally a Nail may become jammed in the ring mecha ...
-
Harbor Freight Tools 47612 - page 10
Page 10 SKU 47612 For technical questions, please call 1-800-444-3353. Inspection, Maintenance, and Cleaning 1. Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil, then wipe dry . Do not use detergent oil or additives as these lubricants will cause accelerated wear to the internal seals. 2. Inspect the air supply lt ...
-
Harbor Freight Tools 47612 - page 11
Page 1 1 SKU 47612 For technical questions, please call 1-800-444-3353. P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. Part Description 1 Nameplate 2 W arning Plate 3 Bolt 4 W asher 5 O-Ring 6 Deector 7 Rubber Pad 8 Mufer 9 Cap 10 Set Screw 11 Bolt 12 ...
-
Harbor Freight Tools 47612 - page 12
Page 12 SKU 47612 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. ...
Harbor Freight Tools 47612についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 47612の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 47612で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。