Microsoft System Boardのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- System Boardの取扱説明書
- Microsoftの製品カード
- パンフレット
- またはMicrosoft System Boardの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Microsoft System Boardの取扱説明書に含まれています。
- UserManuals.org
- Microsoft
- Microsoft コンピュータハードウェア
- Microsoft System Board
Microsoft System Boardの取扱説明書 span>
ページに移動 of 64
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
Summary
-
Microsoft System Board - page 1
IBUS-BAT-I370 System Board Users Manual 37610914 ...
-
Microsoft System Board - page 2
Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representat ...
-
Microsoft System Board - page 3
CE, FCC and DOC Statement This equipment has been tested and found to comply with the limits for a Class B FCC and Class A CE digital device. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequ ...
-
Microsoft System Board - page 4
Table of Contents Chapter 1 - Introduction 1. 1 Features and Specifications.................................................................................. 1. 2 Package Checklist......................................................................................................... Chapter 2 - Hardware Installation 2. 1 System Board Layout ..... ...
-
Microsoft System Board - page 5
60 60 62 Appendix A - System Error Messages A .1 POST Beep....................................................................................................................... A .2 Error Messages.............................................................................................................. Appendix B - Troubleshooting B.1 Troublesh ...
-
Microsoft System Board - page 6
Introduction 6 1.1 Features and Specifications 1.1.1 Features Chipset Intel 440BX AGPset Processor The system board is equipped with Socket 370 for installing an Intel Celeron TM processor that is packaged in PPGA (Plastic Pin Grid Array). It is also equipped with a switching voltage regulator that automatically detects 1.30V to 2.05V. ...
-
Microsoft System Board - page 7
Introduction 7 The system board is equipped with 1 dedicated AGP slot. AGP is an interface designed to support high performance 3D graphics cards. It utilizes a dedicated pipeline to access system memory for texturing, z-buffering and alpha blending; delivering up to 533MB/ sec. bandwidth for 3D graphics applications. AGP in this system board w ...
-
Microsoft System Board - page 8
Introduction 8 PCI Bus Master IDE Controller Two PCI IDE interfaces support up to four IDE devices Supports ATA/33 or ATA/66 hard drives PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.) Bus mastering reduces CPU utilization during disk transfer Supports ATAPI CD-ROM, LS-120, ZIP and SCSI sequential b ...
-
Microsoft System Board - page 9
Introduction 9 1.1.2 Intelligence Automatic CPU/Chassis Fan Off The CPU and chassis fans will automatically turn off once the system enters the Suspend mode. Dual Function Power Button (ATX power supply only) Depending on the setting in the BIOS setup, this switch will allow the system to enter the Soft-Off or Suspend mode. External Modem Ring- ...
-
Microsoft System Board - page 10
Introduction 10 Important: The power button will not function once a keyboard password has been set in the KB Power On Password field of the Integrated Peripherals setup. You must type the correct password to power-on the system. The 5VSB power source of your power supply must support ≥ 720mA (minimum). ACPI (ATX power supply on ...
-
Microsoft System Board - page 11
Introduction 11 1.2 Package Checklist The system board package contains the following items: þ The system board þ Serial, mouse and printer port cables Option 1: - One card-edge bracket with a 9-pin and 25-pin serial port cables - One card-edge bracket with a 25-pin printer port cable and a PS/2 mouse port cable Option 2: - One card-edge brac ...
-
Microsoft System Board - page 12
12 Hardware Installation 2.1 System Board Layout Chapter 2 - Hardware Installation ...
-
Microsoft System Board - page 13
Hardware Installation 13 2.2 System Memory The 168-pin DIMM (Dual In- line Memory Module) sockets support PC SDRAM DIMM, 3.3V. PC SDRAM (Synchronous Dynamic Random Access Memory) is a fast memory interface technology that includes using the clock on the chip to synchronize with the CPU clock so that the timing of the memory chips and the timing of ...
-
Microsoft System Board - page 14
14 Hardware Installation 2 . 3 D I P S w i t c h S e t t i n g s f o r P r o c e s s o r s (For Factory Use Only) You cannot overclock an Intel Celeron TM PPGA processor because its frequency ratio has been fixed by the manufacturer. Therefore SW1 on the system board is used for factory testing only. The table on the next page, which shows the supp ...
-
Microsoft System Board - page 15
Hardware Installation 15 2 . 4 J u m p e r S e t t i n g s f o r t h e C P U s F r o n t S i d e B u s Jumpe r JP2 CPUs Front Side Bus Select The default setting of jumper JP2 is Auto - the system will automatically run according to the FSB of the processor. The 100MHz setting (1-2-3 Off) is reserved for future 100MHz FSB processors. R ...
-
Microsoft System Board - page 16
16 Hardware Installation 2.5 Jumper Settings for Clearing CMOS Data Jumpe r JP6 Clear CMOS Data If, for some reason, the CMOS data becomes corrupted or you forgot the supervisor/user/ keyboard password, the system can be reconfigured with the default values stored in the ROM BIOS. To load the default values, power off your system and unplug the pow ...
-
Microsoft System Board - page 17
Hardware Installation 17 2 . 6 Jumper Settings for Wake-On-Keyboard/ Wake-On-Mouse ( ATX power supply only) Jumpe r JP1 Wake-On-Keyboard/Wake-On-Mouse The system board supports the Wake-On-Keyboard/Wake- On-Mouse function. This function allows you to use the keyboard or mouse to power- on the system. By default, JP1 is disabled. To use this functio ...
-
Microsoft System Board - page 18
18 Hardware Installation 2 . 7 Connecting the Ribbon Cables and Wires of the Ports and Connectors 2.7.1 Serial Ports The built-in serial ports are RS-232C asynchronous communication ports with 16C550A-compatible UARTs that can be used with modems, serial printers, remote display terminals, and other serial devices. You can set the serial ports I ...
-
Microsoft System Board - page 19
Hardware Installation 19 2.7.2 PS/2 Mouse Port The PS/2 mouse port is a 6-pin connector on the system board. Attach the 6-pin mouse port cable, which is m ounted on a card- edge bracket, to connector J2. Make sure the red wire on the PS/2 mouse connector is aligned with pin 1 of connector J2. Mount the card-edge bracket to the system chassis. The P ...
-
Microsoft System Board - page 20
20 Hardware Installation Connecting the Parallel Printer Port Attach the DB-25 printer port cable to connector JP5 on the system board. Make sure the colored stripe on the ribbon cable aligns with pin 1 of JP5. Use a small nutdriver to mount the cable into a DB-25 cutout in the system chassis. If your printer port cable is attached to a card-edge b ...
-
Microsoft System Board - page 21
Hardware Installation 21 2.7.4 Floppy Disk Controller The system board is equipped with a shrouded floppy disk header that supports two standard floppy disk drives. To prevent improper floppy cable installation, the shrouded floppy disk header has a keying mechanism. The 34-pin connector on the floppy cable can be placed into the header only if pin ...
-
Microsoft System Board - page 22
22 Hardware Installation Adding a Second IDE Hard Driv e W h e n u si n g t w o I DE d r i v e s , o n e mu s t b e s e t a s t he m a s t e r a n d t h e other as the slave. Follow the instructions provided by the drive manufacturer for setting the jumpers and/or switches on the drives. We recommend that you use Enhanced IDE or ATA-2, ATA-3 a nd U ...
-
Microsoft System Board - page 23
Hardware Installation 23 2.7.6 USB Ports The system board is equipped with a header at location J11 on the system board, for external USB ports. USB allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. You must have the proper drivers installed in your operating system to use t ...
-
Microsoft System Board - page 24
24 Hardware Installation 2.7.7 IrDA Connector The system board is equipped with an IrDA connector for wireless connectivity between your computer and peripheral devices. The IRDA (Infrared Data Association) specification supports data transfers of 115K baud at a distance of 1 meter. Connect your IrDA cable to connector J5 on the system board. Set ? ...
-
Microsoft System Board - page 25
Hardware Installation 25 2 . 7 . 8 C P U F a n C o n n e c t o r The processor must be kept cool by using a fan with heatsink. Connect the CPU fan to the 3-pin fan connector at location J1 on the system board. 2.7.9 Chassis Fan Connector The system board is equipped with a chassis fan connector. If you are installing a fan in the system unit, conne ...
-
Microsoft System Board - page 26
26 Hardware Installation 2.7.10 AGP Fan Connector The system board is equipped with an AGP fan connector. If the system board is installed with an AGP add-in card and you wish to install a fan on the add-in card, connect the fans connector to location J6 on the system board. Refer to the add-in cards manual for instructions on installing the ...
-
Microsoft System Board - page 27
Hardware Installation 27 2.7.12 Wake-On-LAN Connector (ATX power supply only) The system board supports the Wake-On-LAN function. This function will allow the network to remotely power-on a Soft Power Down (Soft-Off) PC. However, if your system is in the Suspend mode, you can power-on the system only through an IRQ or DMA interrupt. To use the Wake ...
-
Microsoft System Board - page 28
28 Hardware Installation 2.7.13 Power Connector The pin assignment of the ATX power connector is shown below. Pin 1 2 3 4 5 6 7 8 9 10 Function 3.3V/14A 3.3V/14A COM +5V COM +5V COM PW-OK 5VSB +12V Pin 11 12 13 14 15 16 17 18 19 20 Function 3.3V/14A -12V COM PS-ON COM COM COM -5V +5V +5V Important: Your power supply must meet the ATX speci fication ...
-
Microsoft System Board - page 29
Hardware Installation 29 2.7.14 J9 (LEDs and Switches) ATX-LED: ATX 5VSB Standby LED This LED will light when the 5VSB power is active. HD-LED: Primary/Secondary IDE LED This LED will light when the hard drive is being accessed. G-LED: Green LED This LED will light when the system is in the Suspend mode. ATX-SW: ATX Power Switch Depending on the se ...
-
Microsoft System Board - page 30
30 Hardware Installation Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin Assignment ATX-LED (ATX 5VSB Standby LED) HD-LED (Primary/Secondary IDE LED) G-LED (Green LED) ATX-SW (ATX power switch) G-SW (Green switch) RESET (Reset switch) SPEAKER (Speaker connector) KEYLOCK (Power/Standby LED and Keylock connector) AT ...
-
Microsoft System Board - page 31
31 ! Award BIOS Setup Utility 3.1 The Basic Input/Output System The Basic Input/Output System (BIOS) is a program that takes care of the basic level of communication between the processor and peripherals. In addition, the B IOS also contain codes for various advanced features found in this system board. This chapter explains the Setup Utility for t ...
-
Microsoft System Board - page 32
32 ! Award BIOS Setup Utility Date The date format is <day>, <month>, <date>, <year>. Day displays a day, from Sunday to Saturday. Month displays the month, from January to December. Date displays the date, from 1 to 31. Year displays the year, from 1994 to 2079. Time The time format is <hour>, <minute>, <seco ...
-
Microsoft System Board - page 33
33 ! Award BIOS Setup Utility Drive A and Drive B These categories identify the types of floppy disk drives installed. None No floppy drive is installed 360K, 5.2 5 in. 5-1/4 in. standard drive; 360KB capacity 1.2M, 5.2 5 in. 5-1/4 i n. AT-type high-density drive; 1.2MB capacity 720K, 3 .5 in. 3-1/2 in. double-sided drive; 720KB capacity 1.44M, 3.5 ...
-
Microsoft System Board - page 34
34 ! Award BIOS Setup Utility 3.1.2 BIOS Features Setup The BIOS Features Setup allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. The settings on the screen a ...
-
Microsoft System Board - page 35
35 ! Award BIOS Setup Utility CPU L1 Cache and CPU L2 Cache These categories speed up the memory access. The default value is enabled. Enable the External Cache for better performance. CPU L2 Cache ECC Checking Intel Celeron TM processors come with built-in Level 2 cache. By default, ECC is enabled to check the Level 2 cache. If you are not using t ...
-
Microsoft System Board - page 36
36 ! Award BIOS Setup Utility Boot Up NumLock Status T h i s a l l o w s y o u t o de t e r m i n e t h e d e f a u l t s t a t e o f t h e n u me r i c k e y p a d. By default, the system boots up with NumLock on wherein the function of the numeric keypad is the number keys. When set to Off, the function of the numeric keypad is the arrow keys. Ty ...
-
Microsoft System Board - page 37
37 ! Award BIOS Setup Utility OS Select for DRAM > 64MB This item allows you to access the memory that is over 64MB in OS/2. The options are: Non-OS/2 and OS/2. HDD S.M.A.R.T. Capability The system board supports SMART (Self-Monitoring, Analysis and Reporting Technology) hard drives. SMART is a reliability prediction technology for ATA/IDE and S ...
-
Microsoft System Board - page 38
38 ! Award BIOS Setup Utility 3.1.3 Chipset Features Setup :3 :3 :3 : Disabled : Non-ECC : Disabled : Disabled : Disabled :1 :1 : Disabled : Disabled :6 4 : Default : Disabled ROM PCI/ISA BIOS CHIPSET FEA TURES SETUP A W ARD SOFTW ARE, INC. SDRAM RAS-to-CAS Delay SDRAM RAS Precharge Time SDRAM CAS Latency Time SDRAM Precharge Control DRAM Data Inte ...
-
Microsoft System Board - page 39
39 ! Award BIOS Setup Utility SDRAM CAS Latency Time The default setting is 3 which is 3 clock cycles for the CAS latency. DRAM Data Integrity Mode The ECC (Error Checking and Correction) function is supported only in x72 (72-bit) PC SDRAM DIMMs. If you are using x64 (64-bit) PC SDRAM DIMMs, set this field to Non-ECC. Non -ECC Uses x64 PC SDRAM DIM ...
-
Microsoft System Board - page 40
40 ! Award BIOS Setup Utility Memory Hole At 15M-16M In order to improve system performance, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory space below 16MB. When enabled, the CPU assumes the 15-16MB memory range is allocated to the hidden ISA address range instead of the actual system DRAM. When d ...
-
Microsoft System Board - page 41
41 ! Award BIOS Setup Utility 3.1.4 Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy. If you like to use the soft power down feature of Windows 95/98, you must enable the Power Management below. Select Min. Power, Max. Power or User Defined. Either one can be used as long as i ...
-
Microsoft System Board - page 42
42 ! Award BIOS Setup Utility ACPI Function By default, the ACPI function is disabled. This function should be enabled only in operating systems that support ACPI. Power Management This category allows you to select the type (or degree) of power saving by changing the length of idle time that elapses before the Standby mode and Suspend mode are act ...
-
Microsoft System Board - page 43
43 ! Award BIOS Setup Utility Video Off After N/A The system BIOS will never turn off the screen. Suspend The screen is off when the system is in the Suspend mode. Standby The screen is off when the system is in the Standby mode. MODEM Use IRQ This category is used to set an IRQ channel (IRQ 3, 4, 5, 7, 9, 1 0 or 11) for the external modem installe ...
-
Microsoft System Board - page 44
44 ! Award BIOS Setup Utility Soft-Off by PWR-BTTN This category allows you to select the method of powering off your system. H o ld 4 S e c . Regardless of whether the Power Management field is enabled or disabled, if the power button is pushed and released in less than 4 sec, the system enters the Suspend mode. The purpose of this function is to ...
-
Microsoft System Board - page 45
45 ! Award BIOS Setup Utility 4 . Power-on the computer system. After the memory test, press <Del> to enter the Award BIOS setup utility. 5 . Select Power Management Setup and press <Enter>. 6. Enable the Resume on Ring field. 7 . Press <Esc> to return to the main menu of the A ward B IOS setup utility. Select Save & ...
-
Microsoft System Board - page 46
46 ! Award BIOS Setup Utility The settings on the screen are for reference only. Your version may not be identical to this one. 3.1.5 PNP/PCI Configuration This section describes configuring the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default setti ...
-
Microsoft System Board - page 47
47 ! Award BIOS Setup Utility Assign IRQ for VGA When Enabled, the system automatically assigns an IRQ for the VGA card installed. Your VGA card will need an IRQ only when using the video capture function of the card. If you are not using this function and a new device requires an IRQ, you can set this function to Disabled. The IRQ (previously o cc ...
-
Microsoft System Board - page 48
48 ! Award BIOS Setup Utility IDE HDD Block Mode Enab led The IDE HDD uses the block mode. The system BIOS will check the hard disk drive for the maximum block size the system can transfer. The block size will depend on the type of hard disk drive. Disabl ed The IDE HDD uses the standard mode. IDE Primary Master/Slave PIO and IDE Secondary Master/S ...
-
Microsoft System Board - page 49
49 ! Award BIOS Setup Utility themselves. Your system supports five modes, 0 (default) to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode after checking your drive. Auto The BIOS will automatically set the system according to your hard disk drives timing. 0-4 You can select a mode that mat ...
-
Microsoft System Board - page 50
50 ! Award BIOS Setup Utility Onboard FDC Controller Enab led Enables the onboard floppy disk controller. Disabl ed Disables the onboard floppy disk controller. O n b o a r d S e r i a l P o r t 1 a n d O n b o a r d S e r i a l P o r t 2 Auto The system will automatically select an I/O address for the onboard serial port 1 and serial port 2. 3F8/I ...
-
Microsoft System Board - page 51
51 ! Award BIOS Setup Utility Parallel Port Mode, ECP Mode Use DMA and EPP Mode Select These fields will appear only if you selected an I/O address and IRQ in the Onboard Parallel Port field. These apply to a standard specification and will depend on the type and speed of your device. Refer to your peripherals manual for the best option. The par ...
-
Microsoft System Board - page 52
52 ! Award BIOS Setup Utility Hot Key When this option is selected, the KB Power On Hot Key field will appear. Move the cursor to this field to select a function key you would like to use to power- on the system. The options are from Ctrl-F1 to Ctrl- F12. Mouse L eft When this option is selected, double-click the left but- ton of the mouse to ...
-
Microsoft System Board - page 53
53 ! Award BIOS Setup Utility 3.1.11 IDE HDD Auto Detection Use this option to detect the parameters for the hard disk drives installed in your system. These parameters will then be automatically entered into the "Standard CMOS Setup". The IDE HDD Auto Detection screen displays the following categories of information: Size, Cylinders, H e ...
-
Microsoft System Board - page 54
54 ! Award BIOS Setup Utility 3.1.12 Save & Exit Setup When all the changes have been made, highlight Save & Exit Setup and press <Enter>. The message below will appear: S a v e t o C M O S a n d E x i t ( Y / N ) ? N Type Y and press <Enter>. The modifications you have made will be written into the CMOS memory, and ...
-
Microsoft System Board - page 55
" Supported Softwares 55 4.1 Desktop Management Interface (DMI) The system board comes w ith a DMI built into the BIOS. DMI, along with the appropriately networked software, is designed to make inventory, maintenance and troubleshooting of computer systems easier. W ith DMI, a network administrator or MIS engineer can remotely access some info ...
-
Microsoft System Board - page 56
" 56 Supported Softwares 4.1.2 Using the DMI Utility The four menus located on top of the DMI Configuration Utility screen are Edit DMI, Add DMI, Load DMI File and Save DMI File. Use the ← o r → ( l e f t o r r i g h t ) a r r o w k e ys t o s e l e c t a m en u f r o m t he M e n u bar. On the left side of the screen is a list of the syst ...
-
Microsoft System Board - page 57
" Supported Softwares 57 Add DMI 1 .U s e t h e ← o r → arrow keys to select the Add DMI menu. 2 . Highlight the item on the left screen that you would like to add by using the ↑ o r ↓ arrow keys, then press <Enter>. 3. The cursor will move to the screen you select allowing you to enter information about the added item. 4 . Press ...
-
Microsoft System Board - page 58
" 58 Supported Softwares 4.2 Patch Utility for Windows 9 5 The CD included in the system board package contains a patch utility. If you are running Windows 95 (Win95, Win95+, Win95 OSR1: Windows 95 OEM Service Release 1, Win95 OSR2: Windows 95 OEM Service Release 2.0 or Win95 OSR2.1: Windows 95 OEM Service Release 2.0 plus USB Suppleme ...
-
Microsoft System Board - page 59
) System Error Message 59 When the B IOS encounters an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, w ill be shown in the information box at the bottom. Enter Setup to cor ...
-
Microsoft System Board - page 60
) 60 System Error Message setting than indicated in Setup. Determine which setting is correct, either turn off the system and change the jumper or enter Setup and change the VIDEO selection. FLOPPY DISK(S) fail (80) Unable to reset floppy subsystem. FLOPPY DISK(S) fail (40) Floppy type mismatch. Hard Disk(s) fail (80) HDD reset failed. Hard Disk(s) ...
-
Microsoft System Board - page 61
* Troubleshooting 61 B.1 Troubleshooting Checklist This chapter of the manual is designed to help you with problems that you may encounter with your personal computer. To efficiently troubleshoot your system, treat each problem individually. This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes. Some of the mo ...
-
Microsoft System Board - page 62
* 62 Troubleshooting The picture seems to be constantly moving. 1 . The monitor has lost its vertical sync. Adjust the monitors vertical sync. 2 . Move away any objects, such as another monitor or fan, that may be creating a magnetic field around the display. 3 . Make sure your video cards output frequencies are supported by this monitor. The ...
-
Microsoft System Board - page 63
* Troubleshooting 63 Hard Drive Hard disk failure. 1 . Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2 . If the system is configured w ith two hard drives, make sure the bootable (first) h ard drive is configured as Master and the second hard drive is configured as Slave. The master hard drive must have an a ...
-
Microsoft System Board - page 64
* 64 Troubleshooting Serial Port The serial device (modem, printer) doesn t output anything or is outputting garbled characters. 1 . Make sure that the serial devices power is turned on and that the device is on-line. 2 . Verify that the device is plugged into the correct serial port on the rear of the computer. 3 . Verify that the attached s ...
取扱説明書と呼ばれる文書のグループは、Microsoft System Boardの取り付け説明書、サービスマニュアル、簡易説明書、またはMicrosoft System Boardのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Microsoft System Boardの製品を使用するにあたって最も人気のある説明書を閲覧できます。
関連する取扱説明書
Microsoft System Boardデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMicrosoft System Boardを使用するのを助ける技術的文書のことです。説明書は通常、全てのMicrosoft System Boardユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Microsoftの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Microsoft System Boardの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMicrosoft System Boardの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次 strong>。Microsoft System Boardに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Microsoft System Boardデバイスの基本機能を使うにあたってのヒント strong>。 Microsoft System Boardのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Microsoft System Boardに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMicrosoft System Boardのメーカー/サービスへの連絡先に関する情報。
Microsoft System Boardについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもMicrosoft System Boardの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMicrosoft System Boardで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。