-
Patton electronic 2040 - page 1
USER MANUAL MODEL 2040 Series V .35/RS-422 to HSSI Interface Converter SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2040-UM Doc# 07720U2-001, Rev . D Revised 1/22/08 CERTIFIED An ISO-9001 Certified Company Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate ...
-
Patton electronic 2040 - page 2
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2040 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...
-
Patton electronic 2040 - page 3
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2040 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...
-
Patton electronic 2040 - page 4
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. It has been thoroughly inspected and tested and is warranted for One Y ear for parts and labor . If you have any questions about this product, please call Patton Electronics T echnical Support at (301) 975-1007. 2.1 FEA TURES • Bi-directionally converts V .35 ...
-
Patton electronic 2040 - page 5
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. It has been thoroughly inspected and tested and is warranted for One Y ear for parts and labor . If you have any questions about this product, please call Patton Electronics T echnical Support at (301) 975-1007. 2.1 FEA TURES • Bi-directionally converts V .35 ...
-
Patton electronic 2040 - page 6
5 3.1 CONFIGURA TION SWITCHES (MODELS 2040MC-MT & 2040MC-MT -422) The Models 2040MC-MT and 2040MC-MT -422 use a mini DIP switch that may be used to configure the units to connect synchronous V .35 or RS-422 DTE equipment to synchronous HSSI DCE equipment. Each interface converter is factory configured as DCE on the V .35 or RS-422 end, and DTE ...
-
Patton electronic 2040 - page 7
5 3.1 CONFIGURA TION SWITCHES (MODELS 2040MC-MT & 2040MC-MT -422) The Models 2040MC-MT and 2040MC-MT -422 use a mini DIP switch that may be used to configure the units to connect synchronous V .35 or RS-422 DTE equipment to synchronous HSSI DCE equipment. Each interface converter is factory configured as DCE on the V .35 or RS-422 end, and DTE ...
-
Patton electronic 2040 - page 8
3.2 CONFIGURA TION SWITCHES (MODELS 2040MT -MC & 2040MT -MC-422) The Models 2040MT -MC and 2040MT -MC-422 use a mini DIP switch that may be used to configure the units to connect synchronous V .35 or RS-422 DCE equipment to synchronous HSSI DTE equipment. Each interface converter is factory configured as DTE on the V .35 or RS-422 end, and DCE ...
-
Patton electronic 2040 - page 9
3.2 CONFIGURA TION SWITCHES (MODELS 2040MT -MC & 2040MT -MC-422) The Models 2040MT -MC and 2040MT -MC-422 use a mini DIP switch that may be used to configure the units to connect synchronous V .35 or RS-422 DCE equipment to synchronous HSSI DTE equipment. Each interface converter is factory configured as DTE on the V .35 or RS-422 end, and DCE ...
-
Patton electronic 2040 - page 10
Off Off Not a V alid Setting 9 Figure 7. A Common V .35/RS-422 DTE to HSSI DCE Installation Figure 8 . A Common HSSI DTE to V .35/RS-422 DCE Installation Router with HSSI Interface (DTE) T1/T3 DSU with V .35 Interface (DCE) Model 2040 T1/E1 CSU/DSU with HSSI Interface (DCE) T1/E1 Router with V .35 Interface (DTE) 4.0 INST ALLA TION The Model 2040 i ...
-
Patton electronic 2040 - page 11
Off Off Not a V alid Setting 9 Figure 7. A Common V .35/RS-422 DTE to HSSI DCE Installation Figure 8 . A Common HSSI DTE to V .35/RS-422 DCE Installation Router with HSSI Interface (DTE) T1/T3 DSU with V .35 Interface (DCE) Model 2040 T1/E1 CSU/DSU with HSSI Interface (DCE) T1/E1 Router with V .35 Interface (DTE) 4.0 INST ALLA TION The Model 2040 i ...
-
Patton electronic 2040 - page 12
4.3 AC POWER CONNECTION The Model 2040 uses a 5VDC, 2A universal input, power supply that is equipped with a male IEC-320 power entry connector and supports a voltage range of 100-240V AC. This transformer connects to the Model 2040 by means of a cannon jack on the rear panel. There are a variety of domestic and international power cords available ...
-
Patton electronic 2040 - page 13
4.3 AC POWER CONNECTION The Model 2040 uses a 5VDC, 2A universal input, power supply that is equipped with a male IEC-320 power entry connector and supports a voltage range of 100-240V AC. This transformer connects to the Model 2040 by means of a cannon jack on the rear panel. There are a variety of domestic and international power cords available ...
-
Patton electronic 2040 - page 14
5.2.1 Local Loopback (LL) The Local Loopback (LL) test checks the performance of the link between the DTE device and the DCE. Any data sent to the Model 2040 from the DTE in this test mode will be sent to the local DCE and will then be echoed (returned) back to the DTE (the Model 2040 simply converts and passes the data to the the local DCE, which ...
-
Patton electronic 2040 - page 15
5.2.1 Local Loopback (LL) The Local Loopback (LL) test checks the performance of the link between the DTE device and the DCE. Any data sent to the Model 2040 from the DTE in this test mode will be sent to the local DCE and will then be echoed (returned) back to the DTE (the Model 2040 simply converts and passes the data to the the local DCE, which ...
-
Patton electronic 2040 - page 16
APPENDIX A MODEL 2040 SPECIFICA TIONS Data Format: Synchronous Data Rate: 0 - 10Mbps Clocking: All HSSI co-directional timing patterns are supported. Standards: V .35 version converts ITU/CCITT V .35 or EIA-422 to HSSI (ANSI/TIA/EIA-613 Dec. “93 and ANSI/TIA/EIA- 612 NOV . “93) electrically and mechanically; Loopbacks: Local and Remote Interfac ...
-
Patton electronic 2040 - page 17
APPENDIX A MODEL 2040 SPECIFICA TIONS Data Format: Synchronous Data Rate: 0 - 10Mbps Clocking: All HSSI co-directional timing patterns are supported. Standards: V .35 version converts ITU/CCITT V .35 or EIA-422 to HSSI (ANSI/TIA/EIA-613 Dec. “93 and ANSI/TIA/EIA- 612 NOV . “93) electrically and mechanically; Loopbacks: Local and Remote Interfac ...
-
Patton electronic 2040 - page 18
APPENDIX C Model 2040 HSSI Interface HD-50 Connector (DCE or DTE) Pin # Signal 1 SGND (Signal Ground) 26 SGND (Signal Ground) 2 RT (Receive T iming-A) 27 RT/ (Receive T iming-B) 3 DSR/(DCE Ready-A) 28 DSR (DCE Ready-B) 4 RD (Receive Data-A) 29 RD/ (Receive Data-B) 5 Reserved for Future Use 30 Reserved for Future Use 6 ST (Send T iming - A, DCE Sour ...
-
Patton electronic 2040 - page 19
APPENDIX C Model 2040 HSSI Interface HD-50 Connector (DCE or DTE) Pin # Signal 1 SGND (Signal Ground) 26 SGND (Signal Ground) 2 RT (Receive T iming-A) 27 RT/ (Receive T iming-B) 3 DSR/(DCE Ready-A) 28 DSR (DCE Ready-B) 4 RD (Receive Data-A) 29 RD/ (Receive Data-B) 5 Reserved for Future Use 30 Reserved for Future Use 6 ST (Send T iming - A, DCE Sour ...
-
Patton electronic 2040 - page 20
APPENDIX D RS-422/RS-449 Interface DB-37 Connector Pin # Signal 1 Shield 4T D 5T C 6R D 7R T S 8R C 9 CTS 1 1 DM (DSR) 12 TR (DTR) 13 RR (CD) 17 TT (XTC) 19 Signal Ground 20 Signal Ground 22 TD/ 23 TC/ 24 RD/ 25 RTS/ 26 RC/ 27 CTS/ 29 DM/ (DSR/) 30 TR/ (DTR/) 31 RR/ (CD/) 35 TT/ (XTC/) 37 Signal Ground 19 4 R TS (Request to Send) 5 CTS (Clear to Se ...
-
Patton electronic 2040 - page 21
APPENDIX D RS-422/RS-449 Interface DB-37 Connector Pin # Signal 1 Shield 4T D 5T C 6R D 7R T S 8R C 9 CTS 1 1 DM (DSR) 12 TR (DTR) 13 RR (CD) 17 TT (XTC) 19 Signal Ground 20 Signal Ground 22 TD/ 23 TC/ 24 RD/ 25 RTS/ 26 RC/ 27 CTS/ 29 DM/ (DSR/) 30 TR/ (DTR/) 31 RR/ (CD/) 35 TT/ (XTC/) 37 Signal Ground 19 4 R TS (Request to Send) 5 CTS (Clear to Se ...
-
Patton electronic 2040 - page 22
APPENDIX D RS-422/RS-530 Interface DB-25 Connector Pin # Signal 1 FG (Frame Ground) 2 TD (T ransmit Data) 3 RD (Receive Data) S1-4 S1-3 S1-1 S1-2 21 Copyright ©2006 Patton Electronics Company All Rights Reserved ...
-
Patton electronic 2040 - page 23
APPENDIX D RS-422/RS-530 Interface DB-25 Connector Pin # Signal 1 FG (Frame Ground) 2 TD (T ransmit Data) 3 RD (Receive Data) S1-4 S1-3 S1-1 S1-2 21 Copyright ©2006 Patton Electronics Company All Rights Reserved ...
-
Patton electronic 2040 - page 24
USER MANUAL MODEL 503S Serial Surge Protector SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M503S-D Doc# 074201UD, Rev . E Revised 1/21/08 CERTIFIED An ISO-9001 Certified Company Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that y ...
Patton electronic 2040についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPatton electronic 2040の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPatton electronic 2040で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。