Husqvarna 335RJxの取扱説明書

36ページ 1.32 mb
ダウンロード

ページに移動 of 36

Summary
  • Husqvarna 335RJx - page 1

    E E E E n n n n g g g g l l l l i i i i s s s s h h h h 333RJ 335RJ X-series Oper ator ′ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions befor e using the machine. ...

  • Husqvarna 335RJx - page 2

    KEY T O SYMBOLS 2 – English Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine. Alwa ys wear : • A protective ...

  • Husqvarna 335RJx - page 3

    CONTENTS English – 3 Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . KEY T O SYMBOLS Symbols ................................................................ 2 CONTENTS Contents ............................................................... 3 Note the follo wing before starting: .................. ...

  • Husqvarna 335RJx - page 4

    4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River , for production of muskets . The location was logical, since w ater power was har ...

  • Husqvarna 335RJx - page 5

    English – 5 WHA T IS WHA T? What is what on the brush cutter? 32 30 31 23 24 23 29 25 26 27 28 1 T rimmer head 2 Grease filler cap, be vel gear 3 Bev el gear 4 Cutting attachment guard 5 Shaft 6 Handle adjustment 7 Loop handle 8 Suspension ring 9 Stop switch 10 Throttle lock out 11 Throttle control 12 Spark plug cap and spark plug 13 Cylinder co ...

  • Husqvarna 335RJx - page 6

    GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal protective equipment HELMET A protectiv e helmet where there is a risk of falling objects HEARING PRO TECTION Wear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you must also w ear approved prote ...

  • Husqvarna 335RJx - page 7

    GENERAL SAFETY PRECA UTIONS English – 7 BOO TS Wear boots with steel toe-caps and non-slip sole . CLO THING Wear clothes made of a strong f abric and avoid loose clothing that can catch on twigs and branches. Alwa ys wear heavy , long pants. Do not wear je weller y , shorts sandals or go barefoot. Secure hair so it is abo ve shoulder lev el. FIRS ...

  • Husqvarna 335RJx - page 8

    GENERAL SAFETY PRECA UTIONS 8 – English be chec ked. See instructions under the heading Maintenance. Stop s witch Use the stop s witch to switch off the engine . Star t the engine and make sure the engine stops when you mov e the stop switch to the stop setting. Cutting attac hment guard This guard is intended to pre vent loose objects from being ...

  • Husqvarna 335RJx - page 9

    GENERAL SAFETY PRECA UTIONS English – 9 fi tted with a catalytic conv er ter is also designed to reduce harmful exhaust gases. In countries that have a w ar m and dry climate there is a significant risk of fire. W e therefore fit certain mufflers with a spark arrestor mesh. Check whether the muffler on your machine is fitted with this kind ...

  • Husqvarna 335RJx - page 10

    GENERAL SAFETY PRECA UTIONS 10 – English attachment rotates. (CA UTION! The nut has a left-hand thread.) Tighten the nut using the socket spanner . The nylon lining inside the locking n ut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on ...

  • Husqvarna 335RJx - page 11

    GENERAL SAFETY PRECA UTIONS English – 11 • Sharpen all edges equally to maintain the balance of the blade. T rimmer head • Only use the recommended trimmer heads and trimmer cords. These have been tested b y the manuf acturer to suit a par ticular engine size. This is especially impor tant when a fully automatic trimmer head is used. Only use ...

  • Husqvarna 335RJx - page 12

    ASSEMBL Y 12 – English Fitting the J-handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw . Do not ov er tighten. • Attach the J-handle to the loop handle using the three screws, as sho wn. ...

  • Husqvarna 335RJx - page 13

    ASSEMBL Y English – 13 The guard e xtension is removed easily using the spark plug spanner , see illustration. Fitting a blade guar d, grass b lade and grass cutter • Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CA UTION! Ensure that the guard extension is remo ved. Use the recommended blad ...

  • Husqvarna 335RJx - page 14

    FUEL HANDLING 14 – English Fuel safety Nev er star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha ve spilt fuel on yourself or y our clothes, change your clothes. W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is leak ...

  • Husqvarna 335RJx - page 15

    FUEL HANDLING English – 15 Mixing • Alwa ys mix the petrol and oil in a clean container intended for fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the ...

  • Husqvarna 335RJx - page 16

    ST AR TING AND ST OPPING 16 – English Check bef ore star ting • Check the b lade to ensure that no cracks hav e formed at the bottom of the teeth or by the centre hole. The most common reason why cr acks are formed is that sharp cor ners have been f ormed at the bottom of the teeth while sharpening or that the blade has been used with dull teet ...

  • Husqvarna 335RJx - page 17

    ST AR TING AND ST OPPING English – 17 Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb . The b ulb need not be completely filled. Hold the body of the machine on the ground using your left hand (CA UTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with y our right hand until you f eel s ...

  • Husqvarna 335RJx - page 18

    W ORKING TECHNIQ UES 18 – English General working instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot affect y our control of the machine. • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting att ...

  • Husqvarna 335RJx - page 19

    W ORKING TECHNIQ UES English – 19 Basic working tec hniques Alwa ys slow the engine to idle speed after each working operation. Long periods at full throttle without any load on the engine can lead to serious engine damage. Grass clearing using a grass b lade • Grass blades and g rass cutters must not be used on woody stems. • A grass b lade ...

  • Husqvarna 335RJx - page 20

    W ORKING TECHNIQ UES 20 – English Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower . Keep the cord parallel to the ground when cutting. A void pressing the trimmer head against the ground as this can ruin the lawn and damage the tool. • Do not allow the trimmer head to constantly come into ...

  • Husqvarna 335RJx - page 21

    MAINTENANCE English – 21 Carburettor Y our Husqv ar na product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, ...

  • Husqvarna 335RJx - page 22

    MAINTENANCE 22 – English cause fire if directed against dry and combustible material. Some mufflers are equipped with a special spark arrestor mesh. If your machine has this type of muffler , you should clean the mesh at least once a week. This is best done with a wire brush. On mufflers without a catalytic conv er ter the mesh should be clea ...

  • Husqvarna 335RJx - page 23

    MAINTENANCE English – 23 • Unnecessary wear to engine par ts. • Excessive fuel consumption. Clean the filter ev er y 25 hours, or more regularly if conditions are exceptionally dusty . Cleaning the air filter Remo v e the air filter cover and take out the filter . Wash it clean in warm, soapy water . Ensure that the filter is dry before ...

  • Husqvarna 335RJx - page 24

    24 – English MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and service wor k described in this Operator’ s Manual. More extensiv e work must be carried out by an authoriz ...

  • Husqvarna 335RJx - page 25

    English – 25 TECHNICAL D A T A T ec hnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conformity with EC directive 2000/14/ EC. Reported sound power le vel for the machine has been measured with the original cutting attachment that gives the highest lev el. The diff erence between guaranteed and measured s ...

  • Husqvarna 335RJx - page 26

    26 – English TECHNICAL D A T A EC-declaration of conf ormity (Applies to Europe onl y) W e, Husqvarna AB, SE-561 82 Huskv ar na, Sweden, tel: +46-36-146500, declare that the brush cutters Husqv arna 333RJ and 335RJX with serial numbers dating from 2009 onwards (the y ear is clear ly stated on the rating plate, f ollowed by the serial number), com ...

  • Husqvarna 335RJx - page 27

    ...

  • Husqvarna 335RJx - page 28

    "Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35 ...

  • Husqvarna 335RJx - page 29

    1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5 ...

  • Husqvarna 335RJx - page 30

    T35, T35x "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm ...

  • Husqvarna 335RJx - page 31

    "Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T45, T45x ...

  • Husqvarna 335RJx - page 32

    ...

  • Husqvarna 335RJx - page 33

    ...

  • Husqvarna 335RJx - page 34

    ...

  • Husqvarna 335RJx - page 35

    ...

  • Husqvarna 335RJx - page 36

    1153299-26 ´®z+U=|¶6J¨ ´®z+U=|¶6J¨ 2010-03-15 Original instructions ...

メーカー Husqvarna カテゴリー Brush Cutter

Husqvarna 335RJxのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 335RJxの取扱説明書
- Husqvarnaの製品カード
- パンフレット
- またはHusqvarna 335RJxの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Husqvarna 335RJxの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Husqvarna 335RJxの取り付け説明書、サービスマニュアル、簡易説明書、またはHusqvarna 335RJxのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Husqvarna 335RJxの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Husqvarna 335RJxデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHusqvarna 335RJxを使用するのを助ける技術的文書のことです。説明書は通常、全てのHusqvarna 335RJxユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Husqvarnaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Husqvarna 335RJxの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHusqvarna 335RJxの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Husqvarna 335RJxに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Husqvarna 335RJxデバイスの基本機能を使うにあたってのヒント。 Husqvarna 335RJxのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Husqvarna 335RJxに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHusqvarna 335RJxのメーカー/サービスへの連絡先に関する情報。

Husqvarna 335RJxについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHusqvarna 335RJxの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHusqvarna 335RJxで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)