Insignia HD16の取扱説明書

24ページ 0.42 mb
ダウンロード

ページに移動 of 24

Summary
  • Insignia HD16 - page 1

    User Guide HD16 Document 900.0345 – Rev 1.02 – 03/07 CCTV Camera ...

  • Insignia HD16 - page 2

    2 Revisions Issue Date Revisions 1.00 03/06 New document based on 900.0184 rev 4.00 . 1.01 05/06 Amended Figure 11 to show 4 DIP switches. 1.02 03/07 Removed monochrome models, updated specs. ...

  • Insignia HD16 - page 3

    Document 900.0345 Rev 1.02 3 03/07 Wa r n i n g s Installation and servicing should be perf ormed only by qualified and experienced technicians to conform to all local co des and to maintain your warranty. WARNING! The use of CSA Certified/UL Listed Class 2 power adapters is required to ensure compliance with electr ical safety standards. Explanati ...

  • Insignia HD16 - page 4

    4 FCC Compliance Statement Information to the User : This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of t he FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipmen ...

  • Insignia HD16 - page 5

    Document 900.0345 R ev 1.02 5 03/07 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Insignia HD16 - page 6

    6 Overview The HD16 C CTV Camera can be flush or surface m ounted to a wall or ce iling. The HD16 features a high-impact plastic enclosure and polycarbonate dome that has an adjustable dome insert to conceal camera components without compromising light sensitivity or picture quality. The HD16 accommodates a 5-50 mm varifocal auto-iris lens. Before ...

  • Insignia HD16 - page 7

    Document 900.0345 Rev 1.02 7 03/07 Installation The HD16 Camera is designed to be fl ush or surface mounted on a wall or ceiling. It is weather sealed for indoor or outdoor locations. Overview of Assembly Procedure Figure 1 Installation Comp onents T ask See section 1. Mount the HD16 to a ceiling or wall. See “Mount the HD16” on page 8. 2. Conn ...

  • Insignia HD16 - page 8

    8 Mount the HD16 Follow Figure 2 to mount the HD16 flush to a ceiling or wall. Figure 2 Flush Moun t Installa tion Follow Figure 3 to surface mount the HD16 to a wall or ceiling. Figure 3 Surface Mount Insta llation Mounting screws (not supplied) HD16 base Mounting screws (not supplied) #8-32 x 3/8 inch machine screws (x4) Skirt ...

  • Insignia HD16 - page 9

    Document 900.0345 Rev 1.02 9 03/07 Connect the Po wer Cable 1. Follow Figure 4 for the wiring connection. Figure 4 Wiring 2. Connect the power/video cable from the gimbal assembly to the camera board (see Figure 5 ). Note For secure installations, surf ace-mounted cabl es should be protected by plastic or metal cable covers. Figure 5 Power Cable C ...

  • Insignia HD16 - page 10

    10 Install the Camera Assembly To install the camera assembly into the HD16 base: 1. Remove one of the three thumb nuts from the camera chassis (see Figure 6 ). Loosen the other two thumb nuts. 2. Slide the gimbal ring under the two loosened thumb nuts. 3. Adjust the camera position. See “Adjust the Camera” on page 10. 4. Replace the thumb nut ...

  • Insignia HD16 - page 11

    Document 900.0345 Rev 1.02 11 03/07 Figure 7 Recommended C amera Positions Figure 8 shows how to use the thumb nuts and screws to adjust the gimbal. Figure 8 Gimbal Adjustment Recomm ended camera positions Use these alternate positions when your desired field of view (FOV) is a steep angle or parallel to a wall or ceiling. FOV Legend A = Pan rotati ...

  • Insignia HD16 - page 12

    12 4. Tighten the screws and thumb nuts to lock the gimbal assembly in place. 5. Focus the lens: a. Place the dome as shown in Figure 9 . b. Adjust the focal length using the top locking screw. See Figure 10 for color camera s or Figure 11 for monochrome cameras. c. Adjust th e focus using the bottom locking screw (closest to the camera board). See ...

  • Insignia HD16 - page 13

    Document 900.0345 Rev 1.02 13 03/07 DIP Switch F unctions (C olor and TDN Cameras) Figure 10 Color Camera Switch Sett ings (Var i-focal Auto Iris Lens Shown) Adjustment Method (Color and TDN Cameras) Switch no. Fun c t i on O f f On 10 GAMMA Off (0.45) On (1.0) 9 AE (Automatic Exposure) Off On (see Manually Setting Shutter Speed (Color and TDN Came ...

  • Insignia HD16 - page 14

    14 White Balance Adjustment Method (Color and TDN Cameras) Manually Setting Shutter Speed (Color and TDN Cameras) To manually set the shutter speed, turn switch #9 to the ON position; then set switch #6, #7, and #8 for the desired shutter speed (see Figure 10 ). Note FLON, BLC, and IRIS can be set when switch #9 is set to the OFF position. Caution ...

  • Insignia HD16 - page 15

    Document 900.0345 Rev 1.02 15 03/07 DIP Switch F unctions (WDR Cameras) Figure 11 WDR Camera Switch Settings Note The Wide Dynamic Range camera ha s been designed for the best wide dynamic performance and can only be used with Vari-focal Auto Iris lens. Adjustment Method (WDR Camer as) Switch no. Function Off On 1A G C O f f O n 2 Not used Off On* ...

  • Insignia HD16 - page 16

    16 Adjust the Line Lock (V erti cal Phase) F or External Sync Reference Phase adjustment may be necessary in mu ltiple camera installations to prevent picture roll when switching between camera s. To adjust the vertical phase while switching between two cameras, turn the line lock adjustment pot on one camera until there is no vertical roll. See Fi ...

  • Insignia HD16 - page 17

    Document 900.0345 Rev 1.02 17 03/07 Routine Maintenance Use regular liquid cleaners to remove most dirt and grime from the HD16 enclosure. Caution Do not use harsh or abrasive clean ers which can scratch the polycarbonate dome and reduce visibility from the camera. Dome Replacement If the polycarbonate dome is damaged or scratched beyond use, conta ...

  • Insignia HD16 - page 18

    18 Solving Common T echnical Issues Call Honeywell Customer Service for additional a ssistance (s ee Service for contact numbers). No video ❐ Check that the power supply voltage is within the operating specifications for your camera model (see Specifications ) for details). ❐ Connect a video monitor directly to the HD16 video out put cable to e ...

  • Insignia HD16 - page 19

    Document 900.0345 Rev 1.02 19 03/07 Service Subject to the terms and conditions listed on the Product Warranty Card, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service for as ...

  • Insignia HD16 - page 20

    20 Specifications Video spec ification s High RES Standard RES Pickup device: 1/3 in. CCD Electronic iris: 1/60 to 1/100,000 second Surge protecti on: 1.5 kW transi ent Video output impedance: 1 Vp-p @ 75 Ohms Video signal: Color Standard NTSC Resolutio n: High RES Standard RES Color, True Day/Night 480 TV lines 350 TV lines Wide Dynamic, Wide Dyna ...

  • Insignia HD16 - page 21

    Document 900.0345 Rev 1.02 21 03/07 Operating environment Temperature: Operating -13 ° F to 122 ° F (-25 ° C to 50 ° C) Storag e -31 ° F to 140 ° F (-35 ° C to 50 ° C) Humidity: 0 to 95% RH non-c ondensing Size and weight Dimensions 7.5 in. x 5.3 in. (191 mm x 134.5 mm Size 2.0 lb (0.9 kg) Regulatory Emissions FCC, CE (EN55013) Immunity CE ...

  • Insignia HD16 - page 22

    22 Cable Guidelines Power supply cable maximum length (feet/meter s) Wire gauge Total load Power supply 24 AWG 22 AWG 18 AWG 16 AWG Cameras with AC/D C power supplies 3.5 W 15 VDC 180/55 290/88 730/220 1170/352 3.5 W 24 VAC 470/143 760/232 1926/587 3065/934 Note Calculations are based on an unregul ated linear power supply which would be the worst ...

  • Insignia HD16 - page 23

    Document 900.0345 Rev 1.02 23 03/07 HD16 Model Numbers HD16T-DW-480 Typical HD16 model number Camera Resolution 350 Standard Resolution, 350 TVL 480 High Resolution, 480 TVL Camera Options C Color D True Day/Night W Wide Dynamic DW Wide Dynamic True Day/Night Interface C Coaxial T UTP (Twisted Pair) ...

  • Insignia HD16 - page 24

    www.honeywellvideo.com +1.800.796.CCTV (North America only) HVSsupport@honeywell.com Document 900.0345 – Rev 1.02 – 03/ 07 © 2007 Honeywell International Inc. All rights re served. No part of this publication may be reproduced by any means without written perm ission from Honeywell Video Systems. The information i n this publication is believe ...

メーカー Insignia カテゴリー Security Camera

Insignia HD16のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HD16の取扱説明書
- Insigniaの製品カード
- パンフレット
- またはInsignia HD16の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Insignia HD16の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Insignia HD16の取り付け説明書、サービスマニュアル、簡易説明書、またはInsignia HD16のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Insignia HD16の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Insignia HD16デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがInsignia HD16を使用するのを助ける技術的文書のことです。説明書は通常、全てのInsignia HD16ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Insigniaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Insignia HD16の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははInsignia HD16の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Insignia HD16に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Insignia HD16デバイスの基本機能を使うにあたってのヒント。 Insignia HD16のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Insignia HD16に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるInsignia HD16のメーカー/サービスへの連絡先に関する情報。

Insignia HD16についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもInsignia HD16の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがInsignia HD16で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)