-
Humminbird 595C - page 1
531385-1_A FishFinder 5 95c Oper ations Manual FishFinder 5 95c Oper ations Manual FF595_Man_531385-1_A_PrfE.qxd 12/9/2004 2:40 PM Page 1 ...
-
Humminbird 595C - page 2
ii How Sonar W orks 1 Single Beam Sonar .............................................................................................................. .......................... 1 How GPS and Cartography W ork 2 Multi-Media Card (MMC) ................................................................................................................... ...
-
Humminbird 595C - page 3
iv Powering Up the Unit 26 The Menu System 26 Start-Up Options Menu 28 Normal Operation ............................................................................................................... ....................... 28 Simulator ................................................................................................................. ...
-
Humminbird 595C - page 4
1 v Depth Offset (Advanced) .......................................................................................................................... 64 T emp Offset (Advanced) .......................................................................................................................... 64 Speed Calibration (Advanced, with T emp/Speed ...
-
Humminbird 595C - page 5
2 How GPS and Car togr aphy W ork Y our FishFinder uses GPS and sonar to determine your position, display it on a grid, and provide detailed underwater information. The Global Positioning Syst em (GPS) is a satellite navigation system designed and maintained by the U .S. Department of Defense. GPS was originally in tended for military use; however ...
-
Humminbird 595C - page 6
5 4 What’ s On the Sonar Display The FishFinder can display a variety of useful information about the area under and adjacent t o your boat, including the following items: NOTE: Entries in this view that list (with T emp/Speed or GPS Receiver) are available if either device is connected t o the Fishing Sys tem. If both devices are connected, then ...
-
Humminbird 595C - page 7
7 6 Views The views available on your FishFinder are: Sonar views: Na vig a tion views: • Sonar View • Bird’ s E ye View • Sonar Zoom View • Chart View • Big Digits View • Combo View Sonar View is the default view . When the VIEW key is pressed, the display cycles thr ough the available views. When the EXIT key is pressed, the display ...
-
Humminbird 595C - page 8
9 Bott om Presentation As the boat moves, the unit c harts the changes in depth on the display to create a pr ofile of the Bott om Contour . The type of bot t om can be determined from the return c harted on the display . A Hard Bott om such as compacted sedimen t or flat roc k appears as a thinner line across the display . A Soft Bottom suc h as m ...
-
Humminbird 595C - page 9
11 Big Digits View Big Digits View provides digital data in a large, eas y-to-see format. Depth is always displayed. Readouts for temperature, speed and T riplog information are displayed automatically if the appropriate accessory is connected to the FishFinder . The T riplog shows distance traveled, average speed, and time elapsed since the T ripl ...
-
Humminbird 595C - page 10
12 Bird’ s Eye View Bird's Eye View shows a 3D perspective view of the track and the c hart land contour from a point above and behind the boat (the eye point). As the boat turns , the eye point moves t o follow the boat. When you press the 4-W A Y Cursor key in the Bird’ s Eye View , the position of the eye point will shift. This allows y ...
-
Humminbird 595C - page 11
15 14 Viewing Cartography In the Chart or Combo Views, ther e are several cartography-related functions that you can access using various keys. Panning: Use the 4-W A Y Cursor keys to move the chart around on the display in the direction of the key being pressed. When you do this, a Bullseye Cursor is drawn at the center of the screen and is link e ...
-
Humminbird 595C - page 12
17 Routes link two or more waypoints together to create a path for navigation, and ar e used in trip planning. Y ou can link individual waypoints together by using the GOT O key . A route represents your intended navigation and shows the shortest path from each waypoin t to the next. As you travel a route, staying on the rout e line is the most eff ...
-
Humminbird 595C - page 13
19 Add a W aypoint T arget or T rolling Grid Add or Remove a W aypoint T arget: Fr om the W aypoints submenu, select T arget and press the RIGHT Cursor key to display a list of waypoin ts. Select the waypoint you want to target. A tar get consisting of concen tric circles centered on the selected waypoint will appear on all of the navigation views; ...
-
Humminbird 595C - page 14
Sav e, Edit or Delete a Route Save the current route: While you ar e navigating, the current route can be saved. From the Navigation X -Press™ Menu, select Save Current Route and pr ess the RIGHT Cursor key . Navigation will continue. Display the Routes submenu: Fr om any view , press the MENU key twice to display the Main Menu System, then use t ...
-
Humminbird 595C - page 15
23 VIEW Key The VIEW key is used to cycle through all av ailable views. Press the VIEW key to advance to the ne xt view . Repeatedly pr essing VIEW cycles through all views available. Views can be hidden to optimize the syst em to your fishing requirements (see View Menu T ab ). IN FO K e y Press the INFO key while in Bird's Eye, Chart or Comb ...
-
Humminbird 595C - page 16
25 EXIT K ey The EXIT key has multiple functions, depending on the situation: • If an alarm is sounding, pressing EXIT will cancel the alarm. • If a menu tab is selected, pressing EXIT will exit the menu mode and return t o the view . • If a menu is active, pressing EXIT will return to the previous level in the menu syst em. • Pressing EXIT ...
-
Humminbird 595C - page 17
Press the MENU key twice for the Main Menu, then use the 4-W A Y Cursor LEFT or RIGHT key to select a tab , and use the DOWN or UP key t o select a specific menu item under that tab, then use the LEFT or RIGHT k eys again to change a menu set ting. Press the EXIT ke y to move quic kly to the top of the tab . A down arrow at the bot tom of a menu me ...
-
Humminbird 595C - page 18
System Status Use System Status to view system c onnections and to conduct a unit self -test. E xit System S tatus by powering your FishFinder off . The following screens are displayed in turn when you press the VIEW but ton when using System Status: • Self T est • Accessory T est • GPS Diagnostic View . Self T est displays results from the i ...
-
Humminbird 595C - page 19
Sonar X -Press™ Menu (Sonar Views Only) The Sonar X-Press™ Menu pr ovides access to the set tings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X -Press™ Menu. NOTE: Menu c hoices will vary depending on system set tings suc h as whether the unit is set for Advanced User mode or what transduc ...
-
Humminbird 595C - page 20
33 Upper Range (Advanced: Sonar , Split Sonar and Big Digits Views Only) Upper Range sets the shallowest depth range that will be displayed on the Sonar , Split Sonar and Big Digits Views. The Upper Range menu choice is available when User Mode is set t o Advanced (see Setup Menu T ab: User Mode ) and can only be accessed from the Sonar , Split Son ...
-
Humminbird 595C - page 21
35 Bott om View Bott om View selects the method used to represent bot t om and structure on the display . Structure ID® represents weak returns in blue and strong returns in red. WhiteLine® highlights the str ongest sonar returns in white resulting in a distinctive outline. This has the benefit of clearly defining the bott om on the display . See ...
-
Humminbird 595C - page 22
Sav e Current T rack Save Current T rack allows you to save the current trac k being displayed. Aft er the current trac k is saved, a new current trac k is started. T o Sa v e C urren t T r ack: 1. Highlight Save Current T rack on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Control k ey to initiate saving the curren t track. 3. ...
-
Humminbird 595C - page 23
39 Remo ve Grid (Only if a Grid is Active) Remove Grid removes the waypoint grid from the display . This menu choice will only appear when a grid has already been applied to a waypoint. T o R emo v e a Grid: 1. Highlight Remo ve Grid on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Control k ey to remove the grid. Sonar Window (C ...
-
Humminbird 595C - page 24
41 Fish ID+™ Fish ID+™ uses advanced signal processing to int erpret sonar returns, and will display a Fish S ymbol when very selective requirements are met. When a fish is detected, a fish icon and its depth are displayed abo ve the return that has been classified as being a fish. Three diff erent fish size ic ons represent the in tensity of t ...
-
Humminbird 595C - page 25
43 Depth Lines (Advanced) Depth Lines divide the display into four equal sections that are separat ed by three horizontal depth lines. The depth of each line is displayed along the depth scale. Y ou can either turn Depth Lines On or Off . The Depth Lines menu choice is available when User Mode is set t o Advanced (see Setup Menu T ab: User Mode ). ...
-
Humminbird 595C - page 26
45 Max Depth (Advanced) Max Depth adjusts the maximum depth of operation. The performance of your FishFinder can be tuned to the maximum depth you will be fishing in by set ting the Max Depth. When a maximum depth is set, your FishFinder will not att empt to acquire sonar data below that depth, thus increasing overall performance. When Max Depth is ...
-
Humminbird 595C - page 27
47 T r acks Tr ac k s allows you to view the T racks submenu. T o view the T racks Submenu: 1. Highlight T racks on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Control k eys to view the T racks submenu. The T r ac k s Submenu c on tains the f ollowing menu c hoices: Edit allows you to select a previously-saved track and edit its name. ...
-
Humminbird 595C - page 28
49 Chart Detail Level Chart Detail Level allows you to select how much chart detail you want displayed on the Navigation Views. Basic shows land areas, ports, obstructions and restricted areas. Navigation shows navaids, landmarks , ferryways and navigation routes in addition t o the Basic information. Underwater shows depth cont ours, fishing areas ...
-
Humminbird 595C - page 29
51 Grid Rotation Grid Rotation allows you to set the orientation of the tr olling grid in degrees, where a set ting of 0° displays a standard North, South, East, W est alignment. See W aypoints for information on how t o set a Grid. T o c hang e the Grid R ota tion setting: 1. Highlight Grid Rotation on the Navigation main menu. 2. Use the LEFT or ...
-
Humminbird 595C - page 30
53 Clear Map Offset (Advanced) Clear Map Offset allows you to clear the Map Offset. Clear Map Offset is only accessible if a Map Offset is currently active. T o Clear Map O f fset: 1. Make sur e you are in Advanced User Mode, then highlight Clear Map Offset on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Control k ey to clear the Map O ...
-
Humminbird 595C - page 31
55 Depth Alarm Depth Alarm sounds when the depth becomes equal to or less than the menu set ting. T o c hang e the Depth Alarm setting: 1. Highlight Depth Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys t o change the Depth Alarm set ting. (OFF , 1 to 100 feet, or 0 .5 t o 30 meters [International Models Only] , ...
-
Humminbird 595C - page 32
57 Arrival Alarm Arrival Alarm sounds when the boat has either ex ceeded the distance to the destination waypoint, or has ent ered the Arrival Alarm Circle, based on the menu setting when navigating. Arrival Alarm allows you t o set how close the boat must be to the destination waypoint before the Arrival Alarm will sound. T o c hang e the Arriv al ...
-
Humminbird 595C - page 33
59 Setup Menu T ab From any view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor k ey until the Setup tab is selected. NOTE: Menu c hoices will vary depending on system set tings suc h as whether the unit is set for Advanced User mode and what accessories are at tached to the unit. NOTE: Units - T emp ( ...
-
Humminbird 595C - page 34
61 Units - Speed Units - Speed selects the units of measure for speed-related readouts. T o c hang e the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT 4-WA Y Cursor Control k eys to change the Units - Speed set ting . (kph [International Models Only] , mph, kts, Default = kph f or International models ...
-
Humminbird 595C - page 35
63 Select Readouts (Advanced, Sonar View Only) Select Readouts sets individual digital readouts on the Sonar View . This Advanced feature allows you t o select what data will be displayed in each of 5 fixed -position data windows arranged around the left and bot tom edges of the Sonar View screen, or whether a particular window will be turned off , ...
-
Humminbird 595C - page 36
65 Local Time Zone (Advanced) Local Time Zone selects your time zone in r eference to the time r eported by the GPS receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts). This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode. ) T o c hang e the L ocal Time Zone: 1. M ...
-
Humminbird 595C - page 37
67 NMEA Output (Advanced) NMEA Output turns the NMEA output on or off . This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode. ) The f ollowing N M E A sen t enc es ar e output: DPT - Depth M TW - W ater T emperature GLL - Lat/Lon Position GGA - GPS Fix Data RMC - Recommended Minimum Specific GNSS Data VT G - ...
-
Humminbird 595C - page 38
69 T roubleshooting Before con tacting the Humminbird® Customer Resource Cent er , please read the following section. T aking the time to review these troubleshooting guidelines may allow you t o solve a performance problem yourself , and therefore avoid sending your unit back for r epair . FishFinder Doesn’t Power Up If your FishFinder doesn’ ...
-
Humminbird 595C - page 39
71 Finding the Cause of Noise Electrical noise usually affects the display with many black dots at high speeds , and high sensitivity readings. One or more of the following sources can cause noise or int erference: Possible Source of Noise Isolation Other electronic devices The boat’ s engine Cavitation from the boat’ s propeller T urn off any ...
-
Humminbird 595C - page 40
73 Specifications Depth Capability ..............................................................................................................................1 000 ft (330 m) Power Output ........................................................................ 300 Wat ts (RMS), 2400 Wat ts (P eak to Peak) Operating Frequency .................... ...
-
Humminbird 595C - page 41
74 Contact Humminbird® Contact the Humminbird® Cust omer Resource Cen ter in any of the following ways: By T elephone (Monday - Friday 8:00 a.m. to 4:30 p.m. C entral Standard Time): 1-800- 633- 1468 By e-mail (typically we respond to your e-mail within three business days ): custserv@johnsonoutdoors.com For direct shipping, our address is: Hummi ...
Humminbird 595Cについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHumminbird 595Cの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHumminbird 595Cで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。