Haier HWM90-0713Sの取扱説明書

18ページ 3.47 mb
ダウンロード

ページに移動 of 18

Summary
  • Haier HWM90-0713S - page 1

    User's manual This manual is for HWM90-0713S Please read this manual carefully before using. Retain it for future reference. T win-tub Washing Machine with Pump ...

  • Haier HWM90-0713S - page 2

    Contents Names of the parts - - - - - - - - - - - - - - - - - 1 Safety precautions - - - - - - - - - - - - - - - - - 2 Installation and adjustment - - - - - - - - - - - 4 Preparation before washing - - - - - - - - - - 6 The musts in washing - - - - - - - - - - - - - - - 7 Usage of the detergent - - - - - - - - - - - - - 7 Washing sequence - - - - - ...

  • Haier HWM90-0713S - page 3

    1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that ...

  • Haier HWM90-0713S - page 4

    Safety precautions Please insert the power cord into special receptacle with rated vol- tage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily ...

  • Haier HWM90-0713S - page 5

    Please don t use the washer in the environment below 0 C. If the washer is below 0 C, the washer s water inlet system and draining system will be frozen ,then result in the damaged of the whole machine. If the washer has below 0 C, please be sure to ensure the washer is placed under the room temperature for 2~4 hours and then use . It is suggested ...

  • Haier HWM90-0713S - page 6

    Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub. See to th ...

  • Haier HWM90-0713S - page 7

    5 How to change the direction of the drain hoses Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it) Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Wa ter inlet h ...

  • Haier HWM90-0713S - page 8

    Pr eparation bef or e washing 6 Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang the drain hose up to suitable position . 4.Slanting or uneven ground may resu ...

  • Haier HWM90-0713S - page 9

    The musts in washing 7 The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing ca ...

  • Haier HWM90-0713S - page 10

    Washing sequence 8 Figure 3 Spin timer Was h timer (T o set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer). (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). W ash Figure 2 Figure 1 Wat er inlet SPIN TIMER WASH TIMER WASH SE ...

  • Haier HWM90-0713S - page 11

    9 Rinse with stored water Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is a few , please use "Standard" current. If you use "Strong" ...

  • Haier HWM90-0713S - page 12

    T o do spinning and draining together, please first do spinning for around 1 minute, then do draining . Otherwise the spinning will stop owing to too much water stored in the spin tub. In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning. 10 Ï´µÓÐëÖª Spinning Outer cover of The spi ...

  • Haier HWM90-0713S - page 13

    11 After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction ...

  • Haier HWM90-0713S - page 14

    12 Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounti ...

  • Haier HWM90-0713S - page 15

    13 Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty. Do not wash it directly by water. After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after each using. Pull off the power plug and hang up the power cord. Hang up the drain hose. ...

  • Haier HWM90-0713S - page 16

    14 T ro uble-shooting Ans wer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. ...

  • Haier HWM90-0713S - page 17

    15 W ater inlet hose Gland Lint filter Packing list Twin-tub washing machine with pump Name Quantity User's manual One piece One piece One piece One piece One set ...

  • Haier HWM90-0713S - page 18

    16 Specification W ater level/Water quantity (L) (about) Maximum/48 Medium/39 Minimum/33 Injection pressure(MPa ) 0.02 0.2 Wa shing capacity(kg) 9.0 ...

メーカー Haier カテゴリー Washer

Haier HWM90-0713Sのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HWM90-0713Sの取扱説明書
- Haierの製品カード
- パンフレット
- またはHaier HWM90-0713Sの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Haier HWM90-0713Sの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Haier HWM90-0713Sの取り付け説明書、サービスマニュアル、簡易説明書、またはHaier HWM90-0713Sのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Haier HWM90-0713Sの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Haier HWM90-0713Sデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHaier HWM90-0713Sを使用するのを助ける技術的文書のことです。説明書は通常、全てのHaier HWM90-0713Sユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Haierの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Haier HWM90-0713Sの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHaier HWM90-0713Sの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Haier HWM90-0713Sに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Haier HWM90-0713Sデバイスの基本機能を使うにあたってのヒント。 Haier HWM90-0713Sのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Haier HWM90-0713Sに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHaier HWM90-0713Sのメーカー/サービスへの連絡先に関する情報。

Haier HWM90-0713Sについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHaier HWM90-0713Sの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHaier HWM90-0713Sで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)