Vizio XMF1000の取扱説明書

24ページ 2.44 mb
ダウンロード

ページに移動 of 24

Summary
  • Vizio XMF1000 - page 1

    XMF1000 - QUICK INST ALL GUIDE QUICK INST ALL SLIM HDTV MOUNT UNIVERSAL FOR 32” - 55” TVS UP TO 100 LBS ...

  • Vizio XMF1000 - page 2

    IMPORT ANT SAFETY INFORMA TION Read the Important Safety Information on this page before installing or using this mounting system. Always follow the instructions in this Quick Install Guide. VIZIO is not liable for damage or injury caused by incorrect mounting, assembly , or use. This mount fits most screens from 32” to 55”. This mounting syst ...

  • Vizio XMF1000 - page 3

    STEP 1 - BEFORE YOU BEGIN YOU WILL NEED Power Drill 1/2” (12.7mm) Concrete Drill Bit 7/32” (5.5mm) Drill Bit Pencil Electronic Stud F inder Phillips-head Screwdriver 1/2” Wrench Before you begin the installation, ensure you have all of the items listed on this pa ge. Do not begin the installation unless you have all of the follo wing items. M ...

  • Vizio XMF1000 - page 4

    STEP 2 - REVIEW THE P ACKAGE CONTENTS Before you begin, ensure all parts are included and undamaged. T o prevent loss, do not unpack the small parts until they are required. If any parts are missing or damaged, contact VIZIO Customer Ser vice (877) 698-4946. 2 x 2 x 2 x 1 x 1 x 1 x 1 A B C D E F x 1 x 1 G x 2 x 1 x 1 x 1 H I J x 1 ...

  • Vizio XMF1000 - page 5

    3 x 2 M8 x 4 x 2 M4 x 4 x 2 M5 x 4 x 2 M6 x 4 LAG x 4 x 4 ANCHOR x 4 x 4 MISC x 4 [ M4 x 44 ] [ M4 x 15 ] [ M5 x 44 ] [ M5 x 15 ] [ M6 x 44 ] [ M6 x 15 ] [ M8 x 48 ] [ M8 x 20 ] x 4 [ M6 x 20 ] ...

  • Vizio XMF1000 - page 6

    STEP 3A - MOUNTING TO A WALL WITH WOOD STUDS The mount can be attached to walls with wood studs. The wall covering (drywall, lath, plaster , etc.) may not be thicker than 1/2”. If you are mounting on a concrete wall, go to Step 3B on page 10. 1. Use the electronic stud finder to locate two studs in the wall. The studs should be approximately 16? ...

  • Vizio XMF1000 - page 7

    4 3. Remove 1 lag bolt and 1 washer from the pouch labeled LAG . Place part A against the wall as shown, and use a wrench to insert the lag bolt and washer into the hole you just drilled. 4. Push the bar through the opening in the bracket ( part A ) as shown. Push the other bracket ( part A ) onto the bar and hold it flat against the wall. Ensure ...

  • Vizio XMF1000 - page 8

    5. Remove the bar , the leveler , and the unattached bracket ( part A ) from the wall. Using the power drill and the 7/32” drill bit, drill into the pencil mark as shown. Ensure you are drilling into the stud. Drill the hole about 2” into the stud. 6. Remove 1 lag bolt and 1 washer from the pouch labeled LAG . Place the other bracket ( part A ) ...

  • Vizio XMF1000 - page 9

    7. Push the bar through the openings in each bracket ( part A ) as shown. Snap on the leveler ( part E ) and verify that the bar is level. Make any small adjustments, then use a wrench to tighten the 2 lag bolts completely . 8. Using the power drill and the 7/32” drill bit, drill into the top 2 holes as shown. Ensure you are drilling into the stu ...

  • Vizio XMF1000 - page 10

    8 9. Remove 2 lag bolts and 2 washers from the pouch labeled LAG . Use a wrench to insert the lag bolts and washers as shown. Tighten the bolts completely . 10. Attach the handle ( part F ) to the end of the bar . Secure the handle to the bar by inserting a screw ( part H ) into the bottom hole on the handle. Tighten the screw completely . 10 Inser ...

  • Vizio XMF1000 - page 11

    OPTIONAL: The extender can be attached to lengthen the bar . A longer bar may be easier to access when mounting large TVs. T o attach the extender , push it onto the end of the bar . Secure the extender to the bar by inserting a screw ( part H ) into the bottom hole on the extender . Tighten the screw completely . Secure the handle to the extender ...

  • Vizio XMF1000 - page 12

    1 STEP 3B - MOUNTING TO A CONCRETE WALL 1. Determine the height at which you want the mount to hang. Mark the position of the left bracket hole with a pencil. Using the power drill and the 1/2” concrete drill bit, drill a hole into the pencil mark. Drill about 2 1/2” deep. 2. Remove 1 anchor from the pouch labeled ANCHOR . Push the anchor into ...

  • Vizio XMF1000 - page 13

    11 4 3. Remove 1 lag bolt and 1 washer from the pouch labeled LAG . Place a bracket ( part A ) against the wall as shown, and use a wrench to insert the lag bolt and washer into the anchor . 4. Push the bar through the opening in the bracket ( part A ) as shown. Push the other bracket ( part A ) onto the bar and hold it flat against the wall. Ensu ...

  • Vizio XMF1000 - page 14

    5. Remove the bar , the leveler , and the unattached bracket ( part A ) from the wall. Allow the attached bracket to s wing down. Using the power drill and the 1/2” concrete drill bit, drill into the 3 pencil marks as shown. Drill each hole about 2 1/2” deep. 6. Remove 3 anchors from the pouch labeled ANCHOR . Push the anchors into the holes yo ...

  • Vizio XMF1000 - page 15

    7 7. Remove 3 lag bolts and 3 washers from the pouch labeled LAG . Place the other bracket ( part A ) against the wall as shown, and use a wrench to insert the lag bolts and washers into the anchors. Do not insert the lag bolts completely . Leave 1/2” of the bolts showing. 8. Push the bar through the openings in each bracket ( part A ) as shown. ...

  • Vizio XMF1000 - page 16

    14 9 9. Attach the handle ( part F ) to the end of the bar . Secure the handle to the bar by inserting a screw ( part H ) into the bottom hole on the handle. Tighten the screw completely . OPTIONAL: The extender can be attached to lengthen the bar . A longer bar may be easier to access when mounting large TVs. T o attach the extender , push it onto ...

  • Vizio XMF1000 - page 17

    STEP 4 - A TT ACHING THE TV HOOKS AND KICK ST ANDS 1. Gently place the TV on the floor screen-down. Y ou may want to place a rug or blanket beneath the screen to prevent scratches. In your TV’ s User Guide, find the size and depth of your TV’ s mounting holes. These will be listed as M4 , M5 , M6 , or M8 . Open the pouch labeled with the size ...

  • Vizio XMF1000 - page 18

    OPTIONAL: If you want your TV to have a 9° downward tilt when mounted, use the spacers ( part G ) and the longer screws when mounting the TV hooks. 3. Using the screwdriver , insert the screws and washers as shown. Because each TV is different, your VIZIO TV mount includes screws of different lengths. Use screws that can be inserted completely . D ...

  • Vizio XMF1000 - page 19

    4. Place the two kickstands ( parts C and D ) against the two bottom mounting holes as shown. The larger kickstand can be placed on either the left or right mounting hole. 5. Using the screwdriver , insert the screws and washers as shown. Do not use a short screw if a longer screw can be inserted completely . Go to Step 5 on page 18. 4 Arrow Points ...

  • Vizio XMF1000 - page 20

    STEP 5 - HANGING THE TV ON THE MOUNT 1. T urn the handle on the bar until the flat side of the bar is facing the wall. 2 . With the help of another person , lift the TV and hang the TV hooks on the bar as shown. This step requires lifting the TV . T o prevent injury to yourself or damage to your TV , perform this step with the help of another pers ...

  • Vizio XMF1000 - page 21

    3 3. T urn the handle on the bar until the flat side of the bar is facing down. Ensure the flat side of the bar is f acing down. This locks the TV to the bar . If the flat side of the bar is not f acing down, your TV is not locked to the bar . Adjust the position of the TV by sliding it to the left or right. Hide the handle behind the TV by swin ...

  • Vizio XMF1000 - page 22

    TECHNICAL SUPPORT Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone. For more information on warranty service or repair , after the warranty period, please contact our Support ...

  • Vizio XMF1000 - page 23

    ONE-YEAR LIMITED WARRANTY & INSURANCE Covers units purchased as new in United States and Puerto Rico Only VIZIO warrants for a period of one (1) year from the date of purchase to the original purchaser of its mounting brackets, that the bracket shall be free from defects in assembly , material, or workmanship and will repair or replace, at its ...

  • Vizio XMF1000 - page 24

    TRADEMARKS SHOWN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. IMAGES USED ARE FOR ILLUSTRA TION PURPOSES ONL Y . VIZIO , THE V LOGO , WHERE VISION MEETS V ALUE, AND OTHER VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPER TY OF VIZIO INC. PRODUCT FEA TURES AND SPECIFIC A TIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © 2010 VIZIO INC. ALL RIGHTS RESERVED. ...

メーカー Vizio カテゴリー TV Mount

Vizio XMF1000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- XMF1000の取扱説明書
- Vizioの製品カード
- パンフレット
- またはVizio XMF1000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Vizio XMF1000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Vizio XMF1000の取り付け説明書、サービスマニュアル、簡易説明書、またはVizio XMF1000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Vizio XMF1000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Vizio XMF1000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがVizio XMF1000を使用するのを助ける技術的文書のことです。説明書は通常、全てのVizio XMF1000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Vizioの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Vizio XMF1000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははVizio XMF1000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Vizio XMF1000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Vizio XMF1000デバイスの基本機能を使うにあたってのヒント。 Vizio XMF1000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Vizio XMF1000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるVizio XMF1000のメーカー/サービスへの連絡先に関する情報。

Vizio XMF1000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもVizio XMF1000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがVizio XMF1000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)