-
Anton/Bauer HyTRON 140 - page 1
BATTERY SYSTEM HyTRON ™ 140 HyTRON ™ 100 HyTRON ™ 50 OWNER’S MANUAL ® ...
-
Anton/Bauer HyTRON 140 - page 2
TABLE OF CONTENTS IMPORTAN T .................................................................................... 2 INTRODUCT ION .............................................................................. 3 FEATURE S ...................................................................................... 4 HIGH VOLTAG E DESIGN ................... ...
-
Anton/Bauer HyTRON 140 - page 3
IMPORTANT The InterActive 2000 HyTRON battery represents the latest in video battery technology. Nickel Metal Hydrid e (NiMH) is similar to NiCad batteries in most characteristics. However, NiMH has more sen sitive charging and discharging parameters and requires a longer charge time for optimum performance. The charge time is approximately 2-6 hou ...
-
Anton/Bauer HyTRON 140 - page 4
INTRODUCTION The development of the new InterA ctive 2000 HyTRON battery system has been made possible by recent advancements in a cell technology originally designed for the mobile computing indus try . These nickel metal hydride cells provide the highest energy density cell available. The high performance of the new batteries is a ssured through ...
-
Anton/Bauer HyTRON 140 - page 5
FEATURES 1. Microprocessor Fuel Compu ter - Accurately monitors the energy put into and taken out of the battery. This data is processed with sophisticated programs that take into account battery age, self discharge, charge/discharge rate , cell imbalance and previously experienced charge/discharge cycles. The HyTRON battery constantly “learns” ...
-
Anton/Bauer HyTRON 140 - page 6
6. Impac ® Case design - The computer designed high impact case eliminates conventional stress points. This feature protects the cells from impact that would damage or destroy conventional batteries. 7. Gold Mount ® Interface - The solid metal mounting studs assure a smooth, precise mounting for the life of the battery. The Logic Series connector ...
-
Anton/Bauer HyTRON 140 - page 7
HIGH VOLTAGE DESIGN Virtually all cameras/camcorders will indicate a low voltage warning or cease to operate at about 11 volts. Unfortunately, a 12 volt battery must be discharged to 10 volts for full discharge. Thus, a camera/camcorder operating on a 12 volt battery will always cease to operate before fully discharging the battery, leaving 50% of ...
-
Anton/Bauer HyTRON 140 - page 8
CHARGING WITH LOGIC SERIES INTERACTIVE CHARGERS Charge this battery fully before using. Allow the battery to reach a steady green (LifeSaver ® ) mode before using. Charging is automatic on all Logic Series InterActive chargers. The flashing red and green lights indicate the charger and battery are establishing communications. The following are the ...
-
Anton/Bauer HyTRON 140 - page 9
OVER-DISCHARGED BATTERIES Warning: The Hy TRON battery has specialized circuits which ty pically will not allow a battery to overdischarge during extended storage (more than 90 days). However , if the battery is left on a load, such as a light, and allowed to discharge to 0 volts, the battery can be irreversibly damaged. Never leave any battery una ...
-
Anton/Bauer HyTRON 140 - page 10
The HyTRON features an all NEW “RealTime” LCD display providing on-the-fly remaining run time estimates in 15 minute increments as well as simultaneously providing remaining capacity information using the traditional “Fuel Gauge” approach. No special adapters or set up is required. RealTime automatically calculates the load and displays cap ...
-
Anton/Bauer HyTRON 140 - page 11
-The large numbers 1, 2 or 3 indicate remaining hours under current load (only one number will display at any one time) -The pie chart numbers (15, 30, 45, or 60) indicate remaining minutes under current load. - The InterActive Segment indicates a FULLY CHARGED battery verified by charger communication -Top BAR: Indicates 75%-96% - 2 nd BAR: Indica ...
-
Anton/Bauer HyTRON 140 - page 12
If the SIDE BARS (only) flash AND other icons are lit and not flashing, this indicates the battery has requested to be fully charged and discharged in order to update its “learned capacity”. This “learning” should ty pically occur during normal equipment operation. However, if the battery has not been fully charged and discharged for some t ...
-
Anton/Bauer HyTRON 140 - page 13
PREVENTATIVE MAINTENANCE The HyTRON battery incorporates unique battery management features. Together with Anton/Bauer diagnostic accessories, an effective preventative maintenance program can easily be created to optimize the return on battery investment and gr eatly simplify battery management operations. The PowerCharger, coupled with a DDM (Dia ...
-
Anton/Bauer HyTRON 140 - page 14
GUIDELINES FOR OPTIMUM PERFORMANCE AND MAXIMUM LIFE 1. Keep batteries cool or at room temperatures whenever possible. Sustained elevated temperatures are the primary reason for premature failure of NiMH batteries: a. Charging - Charge batteries at room temperature. In warm climates keep chargers in air conditioned room s that are maintained between ...
-
Anton/Bauer HyTRON 140 - page 15
5. Routine use of a battery at discharge rates greater than the battery rating (e.g. >50w for Hy tron 50) can reduce overall service life. Always select the proper size battery for y our application. 6. Discharging the battery for di agnostic purposes should only be performed on an occasional basis (once every 6-8 weeks at most). Unnecessary dis ...
-
Anton/Bauer HyTRON 140 - page 16
SERVICE In the unlikely event a Hy TRON battery fails to deliver acceptable performance, it must be returned to the Anton/Baue r Customer Support Department, the only facility qualified and equipped to servi ce the InterActive 2000 HyTRON batteries and calibrate the electronic components and sensors. Any attempt by the user or any other unauthorize ...
-
Anton/Bauer HyTRON 140 - page 17
Limited Warranty This warranty for the battery product specified in this document (“Product”) is given by Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progress Drive, Shelton, Connecticut 06484. If y ou (the purchaser of the Product from Anton/Bauer, or the person for whom the Product was purchased, if it was a gift) have any questions regarding P ...
-
Anton/Bauer HyTRON 140 - page 18
The liability of Anton/Bauer hereunder is expressly limited to a claim for repair or replacement of the Product or as otherwise stated herein at Anton/Bauer’s sole discretion. Notice of any claim under this warranty shall be delivered to Anton/Bauer during the period of the warranty and the Product shall be returned with its packaging promptly, a ...
-
Anton/Bauer HyTRON 140 - page 19
The power behind the best cameras capturing the best images in the world. sm The following are trademarks of Anton/Bauer, Inc.: ACS, ADM, All Chem, Anton/Bauer, Anton/Bauer logo and parallelogram design, Autom atique, Egripz, Elightz, Elipz, Essentialz, DataTap, Dionic, Gold Mount, Hy TRON, Impac, InterActive and design, LifeSaver, Logic Series, Lo ...
Anton/Bauer HyTRON 140についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAnton/Bauer HyTRON 140の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAnton/Bauer HyTRON 140で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。