Mercedes-Benz R230の取扱説明書

53ページ 4.32 mb
ダウンロード

ページに移動 of 53

Summary
  • Mercedes-Benz R230 - page 1

    1 Sensotronic Brake Control (SBC) 327 HO 09 SBC (WJB) 03 - 05 - 04 R230 and W211: Starting MY2003 ...

  • Mercedes-Benz R230 - page 2

    2 Objectives At the end of this presentation, you should be able to: 1. Explain the function of and purpose for SBC 2. Describe the customer interface with SBC 3. List the hydraulic and electronic components used for SBC 4. Describe how the “normal” feel of the brake pedal is maintained 5. Explain emergency operation of the SBC braking system 6 ...

  • Mercedes-Benz R230 - page 3

    3 Contents Advantages of SBC 5 Driving with SBC 8 SBC components 13 Brake operating unit (BOU) 17 Traction system hydraulic unit 27 Three pressure stages 32 Temperature Compensation 38 Deactivation 39 System activation 42 Bleeding the system 49 ...

  • Mercedes-Benz R230 - page 4

    4 SBC Incorporates these Functions: ABS (Anti lock Brakes 1984) + ASR (Automatic Slip Regulation 1991) + ETS (Electronic Traction System 1995) + ESP (Electronic Stability Program 1996) + BAS (Brake Assist System 1998) ...

  • Mercedes-Benz R230 - page 5

    5 Advantages of SBC • Improves metering of required brake pressure – each wheel can be precisely controlled • Improved BAS function – monitors release of accelerator pedal and application of brake – maximum pressure available immediately – pre - filling of system (overcoming play) – when the BAS function is anticipated, slight pressur ...

  • Mercedes-Benz R230 - page 6

    6 Advantages of SBC • Electronic Brake Proportioning: EBP – allows brake proportioning front to back and side to side • No pedal vibration during ABS operation – eliminates “distraction” to the driver during critical moments – indicator light in instrument cluster signals traction loss • Improved driving dynamics: ABS, ASR, and ESP ...

  • Mercedes-Benz R230 - page 7

    7 Advantages of SBC • Pressure reduction at standstill – reduces stress on components • Dry braking function – wiper input via CAN – ~every 7 to 14 minutes – brake actuation changes time interval ...

  • Mercedes-Benz R230 - page 8

    8 Driving with SBC - Wake - Up SBC is functional as soon as it is “wakened” by: • opening a door (via CAN) • operating the central locking system (via CAN) • depressing the brake pedal • turning key to position 1 • operating parking brake • The Wake - Up may be followed by a Pre - Drive self Check performed by SBC ...

  • Mercedes-Benz R230 - page 9

    9 Driving with SBC – Pre - Drive Check (PDC) When SBC performs a PDC after a "wake - up", the following are checked: Warning! Pressure is applied to brake calipers (~60 bar) • reservoir pressure (if low, it will be corrected by running th e high pressure charge pump in the hydraulic unit) • pressure sensors • control valves • le ...

  • Mercedes-Benz R230 - page 10

    10 Driving with SBC – Delayed Off Function Time that SBC remains operational after use: • with vehicle stationary and was locked = 20 seconds • with vehicle stationary and ignition in “0”, brake pedal not operated = 2 minutes • with vehicle stationary, ignition in “0”, brake pedal operated in delayed off phase and released again = 4 ...

  • Mercedes-Benz R230 - page 11

    11 Warning Display Complete ESP control module failure - Instrument cluster will scroll through failure displays ...

  • Mercedes-Benz R230 - page 12

    12 Warning Display SBC control module failure Certain faults will trigger audible signal ...

  • Mercedes-Benz R230 - page 13

    13 SBC Components • Brake Operating Unit (BOU) • Wheel speed sensors • Traction System Hydraulic Unit (A7/3) ...

  • Mercedes-Benz R230 - page 14

    14 W211 System Overview SBC control module (A7/3n1) Circuit 30 Circuit 87 Circuit 31 Wheel speed sensors L6/1, L6/2, L6/3, L6/4 Stop lamp switch (S9/1) SBC pedal travel sensor (B37/1) Rear SAM (N10/2) ESP control module (N47/5) Front SAM (N10/1) SBC CAN Wheel speeds Wake up Brake lights Speed status Brake lights Diagnostics Diagnostic connector (X1 ...

  • Mercedes-Benz R230 - page 15

    15 R230 System Overview SBC control module (A7/3n1) Circuit 30 Circuit 87 Circuit 31 Wheel speed sensors L6/1, L6/2, L6/3, L6/4 Stop lamp switch (S9/1) SBC pedal travel sensor (B37/1) Diagnostic connector (X11/4) Rear SAM (N10/8) ESP control module (N47/5) SBC CAN Wheel speeds Brake lights Passenger side SAM (N10/11) Wake up Brake lights Speed stat ...

  • Mercedes-Benz R230 - page 16

    16 X11/4 Diagnosis Connection X11/4 Pin 9 Z6/33 R230 W211 A7/3n1 SBC N47/5 ESP N15/5 ESM N51/2 ABC X11/4 Pin 9 A7/3n1 SBC N47/5 ESP Z70/4 N10/1 L.F.SAM ...

  • Mercedes-Benz R230 - page 17

    17 Brake Operating Unit - (BOU) ...

  • Mercedes-Benz R230 - page 18

    18 Brake Operating Unit The Brake Operating Unit (BOU) consists of the following: • Brake fluid reservoir (Do not overfill!) • SBC pedal value sensor • Tandem master cylinder • Brake pressure simulator (Note: no vacuum booster) ...

  • Mercedes-Benz R230 - page 19

    19 Master Cylinder • Fluid return line • Supply hose to SBC • Do not overfill • Fluid level sensor • Hydraulic lines to SBC ...

  • Mercedes-Benz R230 - page 20

    20 Fluid Reservoir Cover • Ultraviolet protection (211 only) ...

  • Mercedes-Benz R230 - page 21

    21 Pedal Value Sensor - (B37/1) • Contains two hall effect sensors • Converts pedal travel value to an electrical signal • Provides input to SBC control module A7/3 ...

  • Mercedes-Benz R230 - page 22

    22 BOU Tandem Master Cylinder Fluid reservoir Floating piston Primary piston Brake pressure simulator Fill valves GF42.46 - P - 4200 - 03SL A7/3 y1 y2 A7/3 - Traction system hydraulic unit with separation valves y1 and y2 ...

  • Mercedes-Benz R230 - page 23

    23 Normal Braking - Light Pressure A7/3 y1 y2 GF42.46 - P - 4200 - 03SL • Driver applies pressure to the brake pedal • Pedal travel sensor sends a signal to A7/3 • Fill valves close • y1 and y2 energized, preventing fluid movement externally • Floating piston allows fluid to enter simulator, compressing the light spring, providing pedal f ...

  • Mercedes-Benz R230 - page 24

    24 Normal Braking - Increased Pressure A7/3 y1 y2 • Increasing pedal travel causes the larger spring to compress, providing harder pedal feel ...

  • Mercedes-Benz R230 - page 25

    25 Normal Braking - Strongest Feedback A7/3 y1 y2 • Further pedal travel causes piston to compress rubber bumper, providing greatly increased pedal pressure ...

  • Mercedes-Benz R230 - page 26

    26 Emergency Operation A7/3 y1 y2 Left front Right front GF42.46 - P - 4200 - 03SL GF42.46 - P - 3000SL • All electrical functions canceled • Hydraulic pressure created with NO power assist • Pressure directed through A7/3 y1 and y2 to .... Left Front and Right Front calipers only ! ...

  • Mercedes-Benz R230 - page 27

    27 Traction System Hydraulic Unit (A7/3) Consists of: • SBC control module (A7/3n1) • High pressure charge pump (A7/3m1) • Pressure reservoir ...

  • Mercedes-Benz R230 - page 28

    28 Traction System Hydraulic Unit A7/3 GF42.50 - P - 4000 - 03S ...

  • Mercedes-Benz R230 - page 29

    29 Legend 1 Brake Operating Unit 2 Brake pressure simulator 3 Pressure reservoir 7 Left front media separator (dividing piston) 8 Right front media separators (dividing piston) A7/3 Traction system hydraulic unit A7/3b1 Front axle pre - pressure sensor A7/3b2 Reservoir pressure sensor A7/3b3 Left front pressure sensor A7/3b4 Right front pressure se ...

  • Mercedes-Benz R230 - page 30

    30 Emergency Operation Circuit GF42.46 - P3000SL • Pressure applied directly to front calipers • y1 and y2 not energized • b1, b3, and b4 pressure sensors may provide information to SBC control module • Media separator/Dividing piston 7 and 8 isolate emergency circuit from normal circuit ...

  • Mercedes-Benz R230 - page 31

    31 Brake Pressure Supply GF 42.50 - P - 4000 - 04S GF42.46 - P - 0001SL • pressure reservoir charged to 160 bar • the high pressure charge pump runs as needed • pressure blocked by y6, y8, y10, y12 ...

  • Mercedes-Benz R230 - page 32

    32 Three Pressure Stages Same pressure stages as used with ABS functions: • Pressure apply • Pressure hold • Pressure release ...

  • Mercedes-Benz R230 - page 33

    33 Pressure Apply - Rear Wheels GF42.50 - P - 4000 - 04S GF42.46 - P - 1000SL GF42.46 - P - 4500 - 02SL Reservoir pressure Brake pedal pressure • Brake pedal depressed • B37/1 and b1 report brake application to control module • y1 and y2 energized • y10 and y12 intake control valves energized • Pressure at each rear wheel monitored by b5 ...

  • Mercedes-Benz R230 - page 34

    34 Pressure Apply - Front Wheels GF42.50 - P - 4000 - 04S GF42.46 - P - 1000SL Reservoir pressure Brake pedal pressure • y6 and y8 energized • pressure applied to left and right dividing pistons 7 and 8 • 7 and 8 apply pressure to caliper • pressure at each wheel monitored by b3 and b4 • Balance valve y3 not energized ...

  • Mercedes-Benz R230 - page 35

    35 Pressure Apply - All Wheels GF42.50 - P - 4000 - 04S GF42.46 - P - 1000SL • Outlet control valves y7, y9, y11, y13 energized ...

  • Mercedes-Benz R230 - page 36

    36 Pressure Hold - All Wheels GF42.50 - P - 4000 - 04S GF42.46 - P - 1000SL • y6, y8, y10, y12 de - energized ...

  • Mercedes-Benz R230 - page 37

    37 Pressure Reduction - All Wheels GF42.50 - P - 4000 - 04S GF42.46 - P - 1000SL • y7, y9, y11, y13 de - energized ...

  • Mercedes-Benz R230 - page 38

    38 Temperature Compensation During continuous brake use the fluid in the calipers expand, this: • creates high pressure • prevents valves 7 & 8 from moving To reduce this pressure, y1 and y2 are pulsed ...

  • Mercedes-Benz R230 - page 39

    39 Deactivation Deactivating the system will: • empty the pressure reservoir (a lower pressure with no volume may be retained) • prevent the charge pump from operating • Note: the warning buzzer is deactivated when accessing SBC with the SDS. SBC must be deactivated with SDS before any work is performed on the system. This will prevent the pr ...

  • Mercedes-Benz R230 - page 40

    40 Deactivation SBC must be deactivated PRIOR to: • working on the hydraulic system • removing or installing brake pads • replacing rotors • replacing the pressure reservoir • replacing the BOU • replacing the SBC hydraulic unit (A7/3) ...

  • Mercedes-Benz R230 - page 41

    41 Deactivation Charge pump disabled and accumulator fluid returned to the reser voir! Pressure at A7/3b2 ...

  • Mercedes-Benz R230 - page 42

    42 System Activation Activation must be performed anytime the system has been deactivated, BEFORE the engine is started! Failure to activate will prevent proper operation and create fau lt codes! Activating SBC with SDS will: • charge the accumulator • perform a Predrive Check • move the pads towards the rotors with ~60 bar pressure • erase ...

  • Mercedes-Benz R230 - page 43

    43 System Activation ...

  • Mercedes-Benz R230 - page 44

    44 Activation - Left Front Caliper held with ~60 bar ...

  • Mercedes-Benz R230 - page 45

    45 Activation - Right Front Caliper held with ~60 bar ...

  • Mercedes-Benz R230 - page 46

    46 Activation - Right Rear Caliper held with ~60 bar ...

  • Mercedes-Benz R230 - page 47

    47 Activation - Left Rear Caliper held with ~60 bar ...

  • Mercedes-Benz R230 - page 48

    48 Activation - Recharge ...

  • Mercedes-Benz R230 - page 49

    49 Bleeding the Brake System Proper system bleeding is critical! Follow directions in SDS • Bleeding must be performed using the SDS • Pressure at bleeder valves will exceed 100 bar (Hold the bleeder hose securely) • Bleeding may require ~1.5 hours • Bleeding may use ~ 1.5 liters of brake fluid AR42.10 - P - 0012R ...

  • Mercedes-Benz R230 - page 50

    50 Equipment Required • Pressure bleeder • Adapters • Fluid receptacle • SDS - follow instructions carefully CAUTION: Extremely high pressure at bleeder! 211 589 01 91 00 AR42.10 - P - 0010 - 02R AR42.10 - P - 0012R WS42.00 - P - 0048B ...

  • Mercedes-Benz R230 - page 51

    51 Bleeding the Brake System AR42.10 - P - 0012R Connect equipment and follow steps in SDS ...

  • Mercedes-Benz R230 - page 52

    52 Acronym List (Used in This Handout.) ABS - Anti - lock Brake System ASR - Anti Slip Regulation BAS - Brake Assist System BOU - Brake Operating Unit CAN - Controller Area Network EBP - Electronic Brake Proportioning EBR - Electronic Brake Regulation E - Gas - Electronic Accelerator ESP - Electronic Stability Program ETS - Electronic Traction Syst ...

  • Mercedes-Benz R230 - page 53

    53 Appendix AR42.10 - P - 0010I Carrying out bleeding operation AR42.10 - P - 0012R Bleeding system with Star Diagnosis GF42.45 - P - 0001 - 04SL ESP driver information GF42.45 - P - 0001SL ESP function GF42.45 - P - 2000SL ESP brake moment co ntrol GF42.45 - P - 3500SL ASR control mode function GF42.46 - P - 0001SL SBC function GF42.46 - P - 1000S ...

メーカー Mercedes-Benz カテゴリー Nail Gun

Mercedes-Benz R230のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- R230の取扱説明書
- Mercedes-Benzの製品カード
- パンフレット
- またはMercedes-Benz R230の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mercedes-Benz R230の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mercedes-Benz R230の取り付け説明書、サービスマニュアル、簡易説明書、またはMercedes-Benz R230のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mercedes-Benz R230の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mercedes-Benz R230デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMercedes-Benz R230を使用するのを助ける技術的文書のことです。説明書は通常、全てのMercedes-Benz R230ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mercedes-Benzの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mercedes-Benz R230の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMercedes-Benz R230の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mercedes-Benz R230に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mercedes-Benz R230デバイスの基本機能を使うにあたってのヒント。 Mercedes-Benz R230のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mercedes-Benz R230に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMercedes-Benz R230のメーカー/サービスへの連絡先に関する情報。

Mercedes-Benz R230についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMercedes-Benz R230の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMercedes-Benz R230で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)