-
Roland PC-60 - page 1
Color CAMM PRO PC-60 APPLICA TION SOFTW ARE GUIDE CONTENTS Setting & Functions of Windows Driver How to Print from Adobe Illurstrator 7.01 (Basic Operation) How to Print from CorelDRA W 7 (Basic Operation) How to Print T ile Page from Illustrator 7.01 (Advanced Operation) How to Print T ile Page from CorelDRA W 7 (Advanced Operation) How to Pri ...
-
Roland PC-60 - page 2
Sheet Size Width x Length (mm) Printing Area (mm) A4 210 x 297 173.3 x 176.1 A3 297 x 420 260.0 x 298.0 ANSI A 215.9 x 279.4 178.8 x 157.1 ANSI B 279.4 x 431.8 243.8 x 308.8 12inch x 33inch 304.8 x 838.2 268.2 x 715.2 16inch x 33inch 406.4 x 838.2 368.4 x 715.2 24inch x 33inch 609.6 x 838.2 571.6 x 715.2 User Size 50.8 x 128.0 ( MIN ) 12.8 x 5.0 60 ...
-
Roland PC-60 - page 3
3 4 5 Roland ColorCAMM PC-60 Properties (Size) 1 2 Cutting line can be selected and cutting speed can be set. Bitmap data will be printed instead of being cut. Please create the cutting line in vector data. Resolution Resolution for the W indows Driver to generae printing data can be selected. Time for the computer to process the data can be shorte ...
-
Roland PC-60 - page 4
1 2 How to select cutting • By Color Only the vector data pointed out by specific color can be cut. Similar colors won’t be cut. Only colors matched with the numbers selected in R, G and B will be cut. Other colors will be printed. Cutting Speed Speed for cutting can be set. Cutting speed should be changed depending on the type of media and the ...
-
Roland PC-60 - page 5
Sheet Size Feeding Rate A4 174mm A3 297mm ANSI A 156.4mm ANSI B 308.8mm 12inch x 33inch 715.2mm 16inch x 33inch 715.2mm 24inch x 33inch 715.2mm User Size Length of Printing Area Roland ColorCAMM PC-60 Properties (Output Option) 1 2 3 4 1 Output Data • When only selecting [Printing] Only the printing data will be sent to PC-60. Cutting line set in ...
-
Roland PC-60 - page 6
2 Process PC-60 prints in full color using the process color . Do not select any of them when printing in Special Color . • Y .M.C.K PC-60 will print in order of Y ellow --> Magenta --> Cyan --> Black. Printing result should be better by selecting this option when printing image with red and green with resin ribbon. When selecting this o ...
-
Roland PC-60 - page 7
Roland ColorCAMM PC-60 Properties (Image Correction) 1 1 Correction V alue • Brightness Brightness of the image can be adjusted. Image will be brighter when the value is increased. Default is 0. • Contrast Contrast of the image can be adjusted. Contrast will be stronger when the value is increased. Default is 0. • Gamma Gamma of the image can ...
-
Roland PC-60 - page 8
Left data will be used for explanation. How to Print from Adobe Illustrator 7.01 (Basic Operation) Start Illustrator7.01 and enter File --> Document Setup. Select [Use Page Setup] and click the [Page Setup] button. Select the [Size] T ab from the properties. Set the size so that the image can be fit. NOTE Please make sur e not to set both the [W ...
-
Roland PC-60 - page 9
Select the [Output Option] T ab. Make sure [Cutting] is selected when data includes the cutting data. When completing the above settings, click the OK button and move the image inside the page. Select the object which you like to be cut and click the [Stroke]. Display RGB and set the value to be the same as the one set in Win- dows Driver . Set [We ...
-
Roland PC-60 - page 10
Color % R G B Cyan 100% 0 255 255 Cyan 5 0 % 1 2 8 2 5 5 2 5 5 Cyan 2 5 % 1 9 2 2 5 5 2 5 5 Magenta 100% 255 0 255 Magenta 5 0% 2 55 1 28 2 55 Magenta 2 5% 2 55 1 92 2 55 Yellow 100% 255 255 0 Yellow 5 0 % 2 5 5 2 5 5 1 2 8 Yellow 2 5 % 2 5 5 2 5 5 1 9 2 R e d 100% 255 0 0 R e d 50% 255 128 128 R e d 25% 255 192 192 Green 100% 0 255 192 Green 5 0 % ...
-
Roland PC-60 - page 11
How to Print from CorelDRA W 7 (Basic Operation) Left data will be used for explanation. Start CorelDRA W 7 and enter File --> Print Setup. Enter the [Size] T ab from the properties. Set the size so that the image can be fit. Enter the [Cutting] T ab. Select [by Color] for cut lines with CorelDRAW 7. Remember the values (RGB) set here!! ...
-
Roland PC-60 - page 12
Enter the [Output Option] T ab. Make sure [Cutting] is selected when data includes the cutting data. When completing the above settings, click the OK button. Enter Layout --> Page Setup in CorelDRA W 7. The page size set in the Windows Driver will be entered for the page size by clicking [Set From Printer]. Make sure to change the settings of di ...
-
Roland PC-60 - page 13
Software Resolution Length ( Max ) CorelDRAW7 600dpi 1263.5mm 300dpi 2650mm 150dpi 3276.7mm Make sure that the settings of the [Outline T ool] is done correctly at the lower right corner . Open the [File] --> [Print] in CorelDRA W 7 and enter the Print Dialog. Image can be checked whether it is inside the page or not by clicking [Preview]. By se ...
-
Roland PC-60 - page 14
How to Print T ile Page from Illustrator 7.01 (Advanced Operation) This section explains how to print tile page from Illustrator 7.01. Please read the section [How to Print from Illustrator 7.01 (Basic Operation) before trying this section. Data below will be used for explanation. Configure PC-60 as a default printer then open the Illustrator 7.01. ...
-
Roland PC-60 - page 15
Make sure that the image is inside the page displayed. Open the [Document Setup] and remove the check from the [Use Print Setup] and then open the [Properties] by clicking the [PageSetup]. W e will devide the data in half so we will set the [Length] to the half of the size of the cur- rent size and press OK button. Select [T ile Imageable Areas] an ...
-
Roland PC-60 - page 16
<Notes for Printing T ile Page> 1. Because the Illustrator 7.01 is a software made by American Company , Adobe System Corporation, the concept of the unit is in inches. And the data will be sent to PC-60 in dpi (dot per inch = number of dots printed in 1 inch). Therefore, the result of printing tile page would be more correct if working in in ...
-
Roland PC-60 - page 17
How to Print Tile Page from CorelDRA W 7 (Advanced Operation) This section explains how to print tile page from Illustrator CorelDRA W 7. Please read the section [How to Print from CorelDRAW 7 (Basic Operation) before trying this section. Left data will be used for explanation. Configure PC-60 as a default printer then open the CorelDRA W 7. Then s ...
-
Roland PC-60 - page 18
Click OK button after completing the above settings. Click [Preview] from the Print Dialog. After checking the image, click [Option]. Select [Print tiled page] and click [Close] button. Make sure that the image is devided as show above. T o overlap the image at the center , open the Print Option Dialog by clicking the [Op- tion] to enter the values ...
-
Roland PC-60 - page 19
This guide explains the operation based on the fact that the Roland Windows Driver for Windows95/98 is used. Please be noted that the Windows Driver below the version 2.1 can not be used with Illustrator 8.0. Start Illustrator 8.0 and select [Document Setup] from [File]. Put check in [Use Print Setup] and click the [Print Setup] button. Select [Siz ...
-
Roland PC-60 - page 20
Make sure to set the [Weight] in Illustrator 8.0 to 0.1pt (0.04mm) for the lines to be cut. Make sure to select [by Color] for [Cutting] in the [Output Option] tab of the [Windows Driver Properties] Before Printing Remove the check from [Silmulate print colors on display] from the [Color] under [File] of Illustrator 8.0. And also, remove the check ...
-
Roland PC-60 - page 21
What to do if . . . . Windows Driver • Time Out Error is displayed. This error is displayed sometimes when printing image file with a big size. Open the properties of PC-60 Windows Driver from the [Printers] folder in the [Settings] of Windows PC. Then increase the time for [T ransmission Retry] in the Detail T ab. • Memory Not Enough will be d ...
-
Roland PC-60 - page 22
• PC-60 cuts but doesn’t print. When [Printing] is not selected, PC-60 doesn’t print. Make sure to select [Printing]. • Image is printed with Special Color at where it is not suppose to be printed. The color which has been print with Special Color is printed at where it is not supposed to be printed. For example, when the image contains var ...
Roland PC-60についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもRoland PC-60の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRoland PC-60で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。