-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 1
Quick Inst allation Guide Model # APSUSB201 Ve r. 2 A 1-Port USB 2.0 Print Server ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 2
Step 1 Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other end of the cable to a router . Step 2 Make sure the printer is powered OFF , then connect one end of the USB cable to the USB port of the Print Server and attach the other end of the cable to the USB port of the printer . Step 3 Power ON the prin ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 3
Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the setup menu to appear . Step 2 Click on PS Utility . Step 3 Click Next . Note: If the setup menu does not appear automatically after you have inserted the CD, go to Start , Run , type D:autorun.exe (where D is the letter of your CD drive) and click OK . ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 4
Step 4 Click Next . Step 5 Click Ye s . Step 6 Click Finish . ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 5
Section 3 Configuring Network Setting Before configuring the Print Server ’ s network setting, please take note of your computer’s TCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK . Step 2 At the command prompt, type ipconfig and press Enter . Step 3 Write down the ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 6
S tep 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example : If your computer ’s IP Address is 192.168.1 .100 , enter the same three numbers: 192.168.1 in the corresponding fields. Note: Y ou can leave the last IP Address number 254 as is unless another network dev ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 7
V erifying Network Connection Section 4 Step 1 Run the PS Utility by going to S tart , (All) Programs , PS Utility , PS Utility v2.00 . Step 2 Make sure the Print Server is detected under the Device Name . Step 3 Click on Show Web Setup to display the Print Server ’ s Web Configuration Utility . Step 4 Make sure the Printer Status displays On lin ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 8
Step 5 Click on the T ools link and select the port your printer is connected to and click the T est button. The Print Server will perform a low-level print test, bypassing the operating system layer . Note: Y our printer should print out a test p age. If not, verify that the printer is powered on and all cables are securely connected and try again ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 9
Section 5 Running PS Wizard W arning: Make sure you have installed the printer driver locally on every computer that will use the print server in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly . Be sure to run the PS Wizard on all the computers that will use the print server in your network. Step 1 Insert ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 10
Section 4 Step 3 Click Next . Step 4 Select the printer that is connected to the print server and click Next . ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 11
Step 5 Double-click on the Print Server Name , select the Printer Port Name , and click Next . Step 6 Click Finish and OK . (For Windows 95/98/ME, you’ll need to reboot the computer). Step 7 Run the PS Wizard on all the computers in your network that will use the print server . ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 12
Section 6 Performing Operating System Print T est The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP , but the steps are similar for all the other Windows operating systems. Step 1 Click on Start , Settings , Printers and Faxes . Step 2 Right-click o ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 13
Section 7 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User ’ s Manual in the provided CD. Y ou have successfully configured the Print Server for printing. Step 3 Click on the Prin ...
-
Airlink101 1-Port USB 2.0 Print Server APSUSB201 - page 14
Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of A irLink101. All other product or service names are the property of their re ...
Airlink101 1-Port USB 2.0 Print Server APSUSB201についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもAirlink101 1-Port USB 2.0 Print Server APSUSB201の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAirlink101 1-Port USB 2.0 Print Server APSUSB201で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。