Sennheiser SET100の取扱説明書

23ページ 0.95 mb
ダウンロード

ページに移動 of 23

Summary
  • Sennheiser SET100 - page 1

    Headset HME 100 HME 105 HME 120 HMD 120 25 Instructions for use ...

  • Sennheiser SET100 - page 2

    26 Contents Safety tips ...................................................................................................... 27 Headset features ................................................................................................ 28 Product variants ...................................................................................... ...

  • Sennheiser SET100 - page 3

    27 The HME 100, HME 105, HME 120 and HMD 120 are pilot headsets with closed ear protector headphones for use in helicopters, propeller and turboprop aircraft. Safety tips • When using a headset, typical aircraft sounds (for example, those from engines, propellers, warning alarms, etc.) may sound different to you. Before operating any aircraft, ma ...

  • Sennheiser SET100 - page 4

    28 Headset featur es HME 100 headset • New passive headset with excellent noise attenuation • Excellent comfort due to very low weight, soft ear cushions and padded headband as well as best possible freedom of movement due to unilateral connecting cable • Foldable headband for easy and space-saving storage • Clear communications due to MKE ...

  • Sennheiser SET100 - page 5

    29 Product variants HME 105 headset The HME 105 differs from the HME 100 in the following features: • No Mono/Stereo switch • Connection of headphones and microphone via XLR-5 plug HME 120 headset The HME 120 differs from the HME 100 in the following features: • No Mono/Stereo switch • Coiled cable • Connection of headphones and microphon ...

  • Sennheiser SET100 - page 6

    30 HMD 120 headset The HMD 120 differs from the HME 100 in the following features: • No Mono/Stereo switch • Coiled cable • M-87/AIC dynamic microphone and low impedance headphones • Connection of headphones and microphone via U-174/U jack plug to a low impedance interface in the helicopter ...

  • Sennheiser SET100 - page 7

    31 Delivery includes HME 100, HME 105 and HME 120 headsets • Headset • Padded carry and storage bag with shoulder strap for headset and accessories • Wind screen for microphone • Cable clip MZQ 2002-1 (Cat. No. 4470) HMD 120 headset • Headset • Padded carry and storage bag with shoulder strap for headset and accessories • Cable clip M ...

  • Sennheiser SET100 - page 8

    32 Pr eparing the headsets for use Connecting the headsets HME 100 headset: 1 1 / 4 ” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone 씰 Connect the 1 / 4 ” (6.35 mm) stereo jack plug for the headphones and the PJ-068 jack plug for the microphone to the corresponding jack sockets of you ...

  • Sennheiser SET100 - page 9

    33 Connecting cable for HME 120 and HMD 120 HME 120 and HMD 120 headsets: 1 U-174/U jack plug for connecting the headphones and the microphone 씰 Connect the U-174/U jack plug for the headphones and the microphone to the U-174/U socket of your intercom. ...

  • Sennheiser SET100 - page 10

    34 Adjusting the headband For good noise attenuation and best possible comfort, the headband has to be adjusted to properly fit your head: 씰 Wear the headset so that the headband runs over the top of your head. 씰 Adjust the length of the headband so that • your ears are completely inside the ear cushions, • you feel even, gentle pressure ar ...

  • Sennheiser SET100 - page 11

    35 Positioning the microphone Relocating the microphone boom The microphone boom can be worn on either side of the mouth. 씰 Loosen the quick-fixing device. 씰 Rotate the microphone boom by 180 ° . 씰 Tighten the quick-fixing device. Positioning the microphone towards the corner of the mouth The HME 100, HME 105 and HME 120 headsets feature a f ...

  • Sennheiser SET100 - page 12

    36 For positioning the microphone of the HMD 120 headset, proceed as follows: 씰 Adjust the length of the microphone boom so that the microphone is placed at the corner of the mouth. To do so, loosen the quick-fixing device and adjust the microphone boom in length. 씰 Pull the middle part of the microphone boom towards the mouth so that the dista ...

  • Sennheiser SET100 - page 13

    37 Using the headsets Mono/Stereo selection (HME 100 only) In general, you‘ll receive a mono sound source so that the Mono/Stereo switch can remain set to ‘Mono’. When using a stereo intercom system, set the headset to stereo operation. Remove the ear cushion ( 쏅 ‘Replacing the ear cushions’) from the earcup with the micro- phone boom a ...

  • Sennheiser SET100 - page 14

    38 Mic Gain Adjustment Adjusting the microphone gain According to JTSO approval C58a, the microphone output voltage is factory-preset to 400 mV. If the microphone output voltage is too high or too low for your intercom system, it can be re-adjusted on the microphone. To do so, use a small slotted screwdriver and turn the ‘Mic Gain Adjustment’ s ...

  • Sennheiser SET100 - page 15

    39 Additional information for helicopter use of the HME 120 headset The polarity of the microphone connection in helicopters is not standardized. If the microphone of your headset does not work with the existing polarity, you can reverse the polarity on the headset by simply rotating the microphone module. To do so, please proceed as follows: 1. Pu ...

  • Sennheiser SET100 - page 16

    40 Spar e parts The following spare parts are available from your Sennheiser agent: • Wind screen for MKE 45-1 electret microphone • Cable clip • Carry and storage bag with shoulder strap • Ear cushions Replacing the wind screen If the wind screen for the electret microphone shows signs of wear such as tears or holes, replace the wind scree ...

  • Sennheiser SET100 - page 17

    41 3 1 2 23 1 1 2 3 4 4 2 1 3 solder side 5 U174/U jack plug 1 Microphone Lo 2 Audio Hi 3 Microphone Hi 4 Audio Lo PJ-068 jack plug 1 Not assigned! 2 Microphone Hi 3 Microphone Lo 1 / 4 ” (6.35 mm) stereo jack plug 1 Audio Hi left 2 Audio Hi right 3 Audio Lo Connector assignment XLR-5 connector 1 Audio Hi 2 Audio Lo 3 Microphone Hi 4 Microphone L ...

  • Sennheiser SET100 - page 18

    42 In case of dif ficulty If problems occur that are not listed in the below table, please contact your Sennheiser agent. Possible cause and what to do You are using a stereo intercom system but the headset is set to mono operation. 씰 Set the Mono/Stereo switch to ‘Stereo’. You are receiving a mono source but the headset is set to stereo oper ...

  • Sennheiser SET100 - page 19

    43 Possible cause and what to do Re-adjust the output voltage on the microphone. 씰 To do so, use a small slotted screwdriver and turn the ‘Mic Gain Adjustment’ screw (see illustration on page 38) until you have reached the desired setting. Problem Microphone output voltage too high or too low ...

  • Sennheiser SET100 - page 20

    44 T echnical data HME 100  HME 105 and HME 120  HMD 120 Headphones Transducer principle dynamic Ear coupling circumaural, closed Frequency response 45–15,000 Hz Nominal impedance 150 Ω , mono, 300 Ω , stereo  150 Ω , mono  16 Ω , mono Attenuation > 10–40 dB Contact pressure approx. 10 N Microphone incl. preamplifier Tran ...

  • Sennheiser SET100 - page 21

    45 HME 100  HME 105  HME 120  HMD 120 Supply voltage typ. 16 V DC  typ. 16 V DC  typ. 16 V DC  – (8–16 V DC,  (8–16 V DC,  (8–16 V DC,  approx. 8–25 mA  approx. 8–25 mA  approx. 8–25 mA  as per RTCA/DO 214)  as per RTCA/DO 214)  as per RTCA/DO 214)  General Data Connecting cable 1.5 m,  ...

  • Sennheiser SET100 - page 22

    46 Certificate of Conformity Sennheiser electronic GmbH & Co. KG declare that this device conforms to the applicable CE standards and regulations. For up-to-date information on Sennheiser products, you can also visit the Sennheiser Web site at “http://www.sennheiser.com”. ...

  • Sennheiser SET100 - page 23

    136 Sennheiser electronic GmbH & Co. KG Telefon 05130/600-0 D-30900 Wedemark Telefax 05130/600-300 Printed in Germany Publ. 01/03 83566 / A02 ...

メーカー Sennheiser カテゴリー Headphones

Sennheiser SET100のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SET100の取扱説明書
- Sennheiserの製品カード
- パンフレット
- またはSennheiser SET100の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sennheiser SET100の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sennheiser SET100の取り付け説明書、サービスマニュアル、簡易説明書、またはSennheiser SET100のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sennheiser SET100の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sennheiser SET100デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSennheiser SET100を使用するのを助ける技術的文書のことです。説明書は通常、全てのSennheiser SET100ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sennheiserの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sennheiser SET100の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSennheiser SET100の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sennheiser SET100に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sennheiser SET100デバイスの基本機能を使うにあたってのヒント。 Sennheiser SET100のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sennheiser SET100に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSennheiser SET100のメーカー/サービスへの連絡先に関する情報。

Sennheiser SET100についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSennheiser SET100の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSennheiser SET100で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)