ページに移動 of 56
SX10000 High Light Output Pr ojection System • Gr oßbildschirm Projektions-System User ’ s Manual • Bedienungshandbuch ...
SX10000 High Light Output Pr ojection System User’ s Manual ...
E – ii CAUTION: T o turn off the main power , be sure to remov e the plug from power outlet. The pow er outlet socket should be installed as near to the equipment as possible , and should be easily accessible . 3. GSGV Acoustic Noise Information Ordinance: The sound pressure le vel is less than 70 dB(A) according to ISO 3744 or ISO 7779. W ARNING ...
E – iii Fire and Shock Pr ecautions 1. Ensure that there is sufficient ventilation and that v ents are unob- structed to prev ent potentially dangerous concentrations of ozone and the build-up of heat inside y our projector . Allow at least 8 inches (20cm) of space between y our projector and a wall. Allow at least 20 inches (50 cm) of space betw ...
E – iv Précautions contre l'incendie ou la décharge 1. S'assurer qu'il y ait une ventilation suffisante et que les ouv er tures ne soient pas obstru é es afin d' é viter des concentrations potentiellement dangereuses d'ozone et l'accumulation de chaleur à l'int é rieur du projecteur. Laisser au moins 20 cm ...
E – v LIMIT A TION OF IMPLIED W ARRANTIES All implied warranties , including warranties of merchantability and fit- ness for a particular pur pose, are limited in duration to the length of this warranty . EXCLUSION OF DAMAGES NECTECH ’ s liability f or any def ective product is limited to the repair or replacement of the product at our option. ...
E – vi T ABLE OF CONTENTS Video Adj ........................................................................ E-33 Noise Reduction ...................................................... E-33 Color Matrix ............................................................. E-34 Y/C D elay ................................................................. E ...
E – 1 Getting Started The fastest w ay to get started is to take y our time and do e verything right the first time. T aking a few minutes no w to re view the manual ma y sav e you hours later on. At the beginning of each section of the manual you'll find an ov erview . If the section doesn't apply , you can skip it. What's In The ...
E – 2 1. Part Names and Functions PC Card Slot * T o tur n on the main power to the projector , press the switch to the ON position (I) and the POWER indicator on the rear panel will turn or- ange in color . Press to the OFF position (0) to turn the main power off . NO TE: When turning off the main power , first return the projector to the standb ...
E – 3 LENS SHIFT ZOOM MENU SELECT - + ENTER ON INDICATOR POWER STATUS ON/OFF OFF CANCEL FOCUS 11 10 9 8 7 5 4 2 1 3 6 1. Power Button Press to turn the projector on when the projector is in the standby con- dition (Main P ower s witch m ust be on and the POWER indicator lit or- ange). Press and hold f or 2 seconds to turn off the projector . 2. P ...
E – 4 OUTPUT INPUT3 OPTION REMOTE1 RGB OUT IN REMOTE2 REMOTE3 INPUT7 INPUT8 INPUT5 INPUT6 OUT LED ON OFF IN IN Y C S-VIDEO1 S-VIDEO2 VIDEO1 VIDEO2 R/C r B/C b Cb H/H V V V H/H V B/C b G/Y G/Y R / Cr Cr SDI Y INPUT2 INPUT1 INPUT4 OUTPUT INPUT0 RGB DIGITAL INPUT9 OUT 5 1 2 3 4 13 12 11 10 9 8 7 6 T erminal Panel Space to install the optional XT SDI ...
E – 5 1. INPUT 3 RGB Connector (Mini D-Sub 15 pin) Connect your PC or other analog RGB equipment such as a high-defi- nition document camera. This connector accepts RGB signals only . Not compatible with component signals . 2. Option Connector (Mini D-Sub 9 pin) For system e xpansion such as PC-control. IN ................. connect to the externa ...
E – 6 ENTER CANCEL UNDO AUTO HELP ON TEST ABC 1 DEF 2 GHI 3 JKL 4 MNO 5 PQR 6 STU 7 VWX 8 0 YZ / 9 POWER INPUT OFF INFO PIXEL SOUND OSD MAGNIFY/ CTL FOCUS + - ZOOM + MENU/ ADDRESS IMAGE/ PROJECTOR POSI/ LENS KEY ST ./ ON OFF R E-LIST/ PICTURE ADJUST WHITE BAL. B AMP / G PICT/ SHUT - MUTE 2 13 28 8 7 6 22 21 15 17 16 3 10 11 26 2 7 9 23 14 12 19 1 ...
E – 7 19 MUTE OSD Press to tur n off the on-screen displa y . Press again to restore the on- screen displa y . NOTE: Y ou can also turn off the on-screen display by pressing and holding CTL and then pressing MUTE OSD; doing this again restores it. In this case any adjustment will still change the projector's memory settings. This mode is ava ...
E – 8 2. INST ALLA TION Formulas: Screen Width H (5:4) (m) = Screen Height V x 5/4 x 0.0254 Screen Height V (5:4) (m) = Screen Width H x 4/5 x 0.0254 Screen Diagonal (5:4) (m) = Screen Height V x 6.4/4 x 0.0254 Screen Width H (5:4) (inch) = Screen Height V x 5/4 Screen Height V (5:4) (inch) = Screen Width H x 4/5 Screen Diagonal (5:4) (inch) = Sc ...
E – 9 Lens Shift Adjustable Range Lens Shift Adjustable Range f or Desktop and Ceiling Mount Application The diagram belo w shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a star ting point. Maximum Possible Range for TL-1ZH, TL-2Z and TL-4Z P ar ...
E – 10 Selecting A Location The fur ther your projector is from the screen or wall, the larger the im- age. The minim um size the image can be projected is 80" (2 m) mea- sured diagonally . The largest the image can be is 500" (12.7 m). W ARNING • Only use your projector on a solid, le v el surface . If the projector f alls to the gro ...
E – 11 Connecting the Power Cable and T ur ning on the Projector Before y ou turn on your projector , ensure that the computer or video source is turned on and that your lens cap is remov ed. 1. Connect the supplied power cable to the projector . Plug the supplied power cable into the A C outlet. 3. SETUP 2. T urn On The Projector The main power ...
E – 12 About Startup Screen (Menu Language Select screen) When you first turn on the projector , you will get the Startup screen. This screen gives y ou the oppor tunity to select one of the se ven men u languages: English, German, F rench, Italian, Spanish,Swedish and Japanese . T o select a menu language, f ollow these steps: 1. Use the Select ...
E – 13 Set up the projector 1. T urn on the pr ojector 2. Select your type of pr ojection: Desktop fr ont, ceiling r ear , desktop r ear , and ceiling front. 3. Display the test pattern by pr essing the TEST b utton on the re- mote contr ol or using the menu. TEST 4. Adjust the ima ge position and the image size . (1) Press and hold the CTL butto ...
E – 14 Keystone Keystone distortion Normal Ke ystone is the distortion of a projected image that usually creates a wider top than bottom. Aiming a projector upw ard on a wall rather than straight at a wall creates this distortion. Use the 䊴 or 䊳 b uttons on the slide bar to correct this ke ystone (trapezoidal) distortion. NOTE: The keystone f ...
E – 15 3-1-6-3. Remove the PC card from the sla ve projector . NOTE: If you select the RGB1 input on the master projector , you must select the same input on the slave projector . The same applies to the RGB2 input. NOTE: After adjusting and registering signals as mentioned above, you must change the input to RGB on the Entry Edit Command window ...
E – 16 Projector Orientation An image can be projected from in front or behind a screen, and the projector can be installed on the ceiling*. Ceiling Front Pr ojection Use [Projector Options] → [Setup] → [P age 1] → [Orientation] to select "Ceiling F ront". (See page E-38.) Ceiling Rear Projection Use [Projector Options] → [Setup ...
E – 17 When used in standalone operation Connecting Y our PC Or Macintosh Computer Connecting your PC or Macintosh computer to SX10000 Projector will enable you to project y our computer's screen image f or an impressiv e presentation. T o connect to a PC or Macintosh : 1. T urn off the power to your projector and computer . 2. Use a signal ...
E – 18 OUTPUT INPUT3 OPTION REMOTE1 RGB OUT IN REMOTE2 REMOTE3 INPUT7 INPUT8 INPUT5 INPUT6 OUT LED ON OFF IN IN Y C S-VIDEO1 S-VIDEO2 VIDEO1 VIDEO2 R/C r B/C b Cb H/H V V V H/H V B/C b G/Y G/Y R / Cr Cr SDI Y INPUT2 INPUT1 INPUT4 OUTPUT INPUT0 RGB DIGITAL INPUT9 OUT When Used with One Switcher (ISS-6020/ISS-6020G) Up to 10 input signals can be ac ...
E – 19 When Used with T wo or More Switchers (100 Inputs) Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher . How to make connections: 1. Connect the REMOTE 1 terminal of the master Switcher to the RE- MO TE 1 of the projector using the optional control cable (15p-15p/ CTL-6010). 2. Next connect the REMO TE 2 terminal of the master ...
E – 20 Set the DIP switch (S8601) of the Switcher as follows: The Projector Slot 1 of the Master Slot 2 of the Master Slot 3 of the Master Slot 4 of the Master Slot 5 of the Master Slot 6 of the Master Slot 7 of the Master Slot 8 of the Master Slot 9 of the Master Slot 10 of the Master Master Slave 1 Slave 2 Slave 3 Slave 4 Slave 5 Slave 6 Slave ...
E – 21 REMOTE 1 Connector Pin Configuration of Optional CTL-6010 Cable REMOTE 1 connector of the Switcher mini D- sub 15 pin (female) REMOTE 1 connector of the Projector mini D-sub 15 pin (female) Shield (frame ground) Pins without a number are open. 51 42 3 10 11 12 13 14 15 6 97 8 This connector is used for either connecting the ISS-6020/ISS-60 ...
E – 22 When used in stand alone operation. Pin No. 14 5 10 4,8,12,11 SHORT/OPEN SHORT OPEN SHORT OPEN SHORT OPEN FUNCTION External control mode ON External control mode OFF POWER ON POWER OFF PICTURE MUTE ON PICTURE MUTE OFF * When the combinations other than specified in the abov e table are selected, the input will be f orcefully s witched to R ...
E – 23 REMOTE2 INPUT7 S-VIDEO1 Y C IN OUT Operating Multiple Projectors with the Remote Contr ol Y ou can operate multiple projectors with the same remote control in wireless operation. T o do so: 1. Select [Menu] → [Projector Options] → [Setup] → [P age 5] → [Projector ID] and assign an ID number to each projector . See also page E-39. 2 ...
E – 24 Using the RGB DIGIT AL connectors The Link mode function allows y ou to adjust or set multiple projectors using the RGB DIGIT AL and OPTION connectors. The D VI DIGIT AL input accepts up to the SXGA (1280 x 1024 @75Hz) signal in Link mode. NOTE: The Auto Adjust feature does not work for DVI digital signal. When DVI signal is selected and t ...
E – 25 Using The Menus 1. Press the MENU button on the remote control to display the men u. 2. Use the ▲ or ▼ b utton on the remote control to select the sub menu. 3. The r ight-oriented delta symbol indicates fur ther choices are a vail- able. Press the 䊳 button to highlight the item y ou want to adjust or set in the selected menu. 4. Pres ...
E – 26 Customizing Basic/Custom Menu The Basic/Custom menu can be customized to meet y our requirements. Selecting a menu item from the "Basic/Custom Menu Edit" list, allo ws you to custom tailor the menu items to y our needs. 1. Select "Basic/Custom Men u Edit" to display the "Basic/Custom Menu Edit" screen. 2. Use ...
E – 27 A List of Direct Key Combinations CTL+ INPUT (1-10) Switches to any selected signal f ound in the Entry List. T o enable this combination, y ou must first assign specific remote ke ys f or direct input selection in the Entry Edit window . CTL+ ENTER (While displa ying Entry list) Displa ys the Entr y Edit Command window . CTL+ MUTE PICT/SH ...
E – 28 Menu T ree 0 – 100 NTSC, Graphics, Graphics NTSC, PAL/SECAM2.8, PAL/SECAM, Natural 1/Natural 2 Advanced Menu Source Select Adjust (Source) Ref Adj Factory Default Projector Options Help Test Pattern RGB1 RGB2 RGB3 Component (YCbCr) Video1 Video2 S-Video1 S-Video2 RGB (DIGITAL) SDI Entry List Switcher Entry List When Switcher Control is t ...
E – 29 Maximum / Medium / Minimum Advanced Menu Source Select Adjust (Source) Ref Adj Factory Default Projector Options Help Test Pattern All Data / Current Signal Including Entry List Keystone Lamp Ref. White Bal. Contents Source Information Projector Information Lamp Mode Brightness R/G/B, Contrast R/G/B Standalone / Master / Slave Standalone / ...
E – 30 Menu windows or dialog boxes typically have the following elements: Title bar : Indicates the menu title. Highlight: Indicates the selected menu or item. Solid triangle: Indicates further choices are availab le. A highlighted triangle indicates the item is active. T ab: Indicates a group of f eatures in a dialog bo x. Selecting on any tab ...
E – 31 Menu Descriptions & Functions Source Select Enables y ou to select a video source such as a VCR, D VD play er , laser disc play er , computer or document camera depending on what is connected to your inputs . Press the up/down b uttons on your remote control or the projector cabi- net to highlight the menu f or the item you w ant to ad ...
E – 32 Picture Select "List" and press ENTER to display the direct K ey assignment list. Select "OK" and press ENTER to close the window . T o close the List window , press CANCEL on the remote. Adjust (Source) This option corrects gamma. Select the appropriate item. NTSC .......................... Setting for NTSC signals Gra ...
E – 33 Horizontal/V ertical Position (when Auto Adjust is of f) Adjusts the image location from left to right. This adjustment is made automatically when the A uto Adjust is turned on. Aspect Ratio (not available for RGB) Y ou can select the aspect ratio for input signal and displa y area re- spectively . Select the appropriate aspect ratio using ...
E – 34 Color Matrix First, select an appropriate color matrix for your input signal, either HDTV or SDTV . Then select an appropriate matr ix type from B-Y/R- Y , Cb/Cr, Pb/Pr or IVX. NOTE: The Color Matrix feature is available for component video signal only . Y/C Delay (not available for RGB) Adjusts Y/C delay le vel. T elecine Use 3:2 pull dow ...
E – 35 Select either the RGB signal type or the Component signal type. RGB ............. RGB signal Component .. Composite signals such as Y/Cb/Cr , Y/Pb/Pr NOTE: This feature is available on RGB 1 and 2 only . Gain This feature adjusts the input le vel of the signal. This must be done to each color :R, G, and B . V olume This f eature adjusts th ...
E – 36 Lamp Mode This feature allo ws the lamp power supply to operate under three set- tings. Maximum ..... This setting consumes maximum current from the AC input and results in the most light output. NOTE: The Maximum mode shortens the lamp life. Be sure to use this mode at temperature of 95 ˚ F (35 ˚ C) or less. Medium ....... This setting ...
E – 37 5. T o enable your setting, select Active on the Execute Switch. 6. Select OK and press the ENTER button on the remote control to complete the setting. NOTE: When On Timer is set and the projector is in the standby mode, the Status indicator flashes green to show that On Timer program is active. The projector must be in stand-by mode at th ...
E – 38 Setup Enables y ou to set operating options. Press "OK" to sav e your changes f or all the f eatures of P age1, P age2, P age3, P age 4 and P age5. [Page 1] Orientation This reorients your image for y our type of projection. The options are: desktop front projection, ceiling rear projection, desk- top rear projection, and ceiling ...
E – 39 Power Management When this option is on and there is no RGB input f or five minutes or more, the projector will automatically turn itself off. Power Off Confirmation This option determines whether a confir mation dialog f or tur ning off the projector will appear or not. Keystone Save This option enables y ou to sav e your current k eyston ...
E – 40 Source Information Displays the status of the current signal. This dialog bo x has three pages. Projector Information Displays the inf ormation for y our projector such as lamp usage, serial number and v ersion number etc.. Link Mode Displa ying Current Status of Link Mode When selecting the tab "P age 4 ", you will get the f oll ...
E – 41 Selecting a new signal that is close to one of the listed signals in horizontal and vertical frequency Selecting a new signal that is close to one of the listed signals in hori- zontal and v er tical frequency may not displa y the image correctly be- cause the new signal is considered as one of the registered signals listed in the Entr y L ...
E – 42 6. SPECIFICA TIONS Optical P anel * 1 DMD TM .9" x 3 1280 x 1024 native resolution up to 1600 x 1200 with Adv anced AccuBlend TM T echnology Lamp 2.0kW Bubble T ype Shor t Arc Xenon Built in: Ov erheat Protection Lamp Ov er-Usage Protection Light Output 8000 ANSI Lumens Full Light Output at 200- 240V Brightness Uniformity >80% edge ...
E – 43 External Control RS232C (1) D-sub 9 pin Contact Closure Switcher (2) D-sub 15 pin In/Out Addressable Remote Control (wired / wireless) P ower Requirement 200-240 V AC , 50/60Hz Input Current 14 A P ower Consumption 2.8 kW Mechanical Installation Orientation: Desktop/F ront, Desktop/Rear , Ceiling/Front, Ceiling/Rear Stacking: Up to 2 proje ...
E – 44 7. Optional Accessories Lens TL-08SF (Short Focal Lens 0.84) : 10kg TL-1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg TL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kg Interface Board XT SDI BOARD SX HDSDI Board Ceiling Mount Kit XL CMKIT Switcher ISS-6020 Video/RGB Switcher A Serial Digital Interface (SDI) board is optional ...
E – 45 8. Compatible Input Signal List Compatible Input Signal List NOTE 1: The VGA, SVGA, XGA and UXGA signals are displayed with Advanced AccuBlend. NOTE 2: UXGA can be supported for separate sync signal only . NOTE 3: DVI digital signal can support a maximum resolution of SXGA@85Hz. NOTE 4: Digital signals are indicated in shaded areas. 640 76 ...
E – 46 Function Link mode Menu Source Select L Adjust(Source) Picture Brightness L Contrast L The others N White Balance N Image Pixel Adjust L (Phase) P osition L The others N Video Adj N Option Adj N Lens Memory N Signal T ype N Switcher N Ref Adj K eystone N Lamp N Ref . White Bal. N F actory Default N Projector Options Timer L Menu M Setup N ...
E – 47 360 (14.17) 680 (26.77) 43 (1.69) 706 (27.80) 626 (24.65) 60 8 (0.31) (2.36) 286 (11.26) 43 (1.69) 52 (2.05) 973 (38.31) 1016 (40) 1155 (45.47) 836 (32.91) The drawings do not include the lens part. Unit: mm (inch) Appendix Dimensions Lens center Lens center ...
E – 48 Tips on Adjusting Focus for Lens Memory Function Optimum f ocus for lens memory function can be achiev ed on the projector b y paying special attention in a f ew areas. Focus adjustment after the projector has w armed up to nor mal operating temperature is better than doing so when the projector is cold. Lens mechanics interact differently ...
Printed in Japan ...
NEC SX10000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SX10000の取扱説明書
- NECの製品カード
- パンフレット
- またはNEC SX10000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NEC SX10000の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、NEC SX10000の取り付け説明書、サービスマニュアル、簡易説明書、またはNEC SX10000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NEC SX10000の製品を使用するにあたって最も人気のある説明書を閲覧できます。
NEC SX10000デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNEC SX10000を使用するのを助ける技術的文書のことです。説明書は通常、全てのNEC SX10000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
NECの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. NEC SX10000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNEC SX10000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NEC SX10000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. NEC SX10000デバイスの基本機能を使うにあたってのヒント。 NEC SX10000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NEC SX10000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNEC SX10000のメーカー/サービスへの連絡先に関する情報。
NEC SX10000についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもNEC SX10000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC SX10000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。