NEC NP01WKの取扱説明書

17ページ 1.9 mb
ダウンロード

ページに移動 of 17

Summary
  • NEC NP01WK - page 1

    W all Mount Unit NP01WK/NP01WK1 Installation and Adjustment Manual English Deutsch Fr ançais Italano Español Português Русский T ürk çe Polski 中文 한글 日本語 Printed in Croatia © NEC Displa y Solutions, Ltd. 2010 NP01WK/NP01WK1 W all mount Unit Installation and Adjustment manual ...

  • NEC NP01WK - page 2

    ENG-1 W all Mount Unit NP01WK/NP01WK1 Installation and Adjustment Manual Thank you for your purchase of this NEC wall mount unit. Please read this installation and adjustment manual car efully to ensure pr oper use. The W all Mount Unit NP01WK/NP01WK1 is exclusively for Projector U300X/U250X/ U310W/U260W and cannot be used for other projectors. Spe ...

  • NEC NP01WK - page 3

    ENG-2 ENG-3 Please heed the following  Symbol In this “Installation and Adjustment Manual”, to ensure the safe and proper use of the product, prevent harm to yourself and others and damage to property , various symbols ar e used. The symbols and meanings are as follows. Please read this manual after ensuring the contents are well understood. ...

  • NEC NP01WK - page 4

    ENG-2 ENG-3 W arning • Do not install in places subject to constant vibration. Extended vibration may cause loosening of the screws and result in the Wall Mount Unit and projector falling and causing injury . Also, it may cause breakdown of the projector . • T o ensure safety , be sure ...

  • NEC NP01WK - page 5

    ENG-4 ENG-5 Pr eparation  Packaged Parts Please check the packaged items. W all adapter:1 Arm:1 Projector adapter:1 W all plate:1 *1 M5 screws:4 *2 *1, *2:T o be used when mounting the wall adapter in the North America region. Cover (A, B):2 pairs Arm cover:1 Plate (B):1 M4 screws:4 M3.5 screws:2 Hex wrench:1 Installation and Adjustment Manual:1 ...

  • NEC NP01WK - page 6

    ENG-4 ENG-5 V ertical adjust/ Arm fixation knobs Arm cover Elongate hole for screw (or bolt) (4 parts) Covers (A, B) Plate (A) Arm fixation screw Grooves for wiring Arm Tilt adjust knobs (4 parts) Central axis W all adapter Cover (B, A) Projector adapter Projector fixation plate Horizontal adjust screws Horizontal fixation nut Plate (B) • • ...

  • NEC NP01WK - page 7

    ENG-6 ENG-7  Dimensions of Parts: (unit: mm) The dimensions of the positions of the wall fixation screws (bolts) of the wall adapter are described. 142 100 100 142 100 100 189 90 - 190 189 219 120 320 280 Projector bottom surface (including the feet) 533 (minimum) -733 (maximum) The center of the wall adapter (central axis) Central axis Project ...

  • NEC NP01WK - page 8

    ENG-6 ENG-7 Mounting the Pr ojector Preparations 1. Determine the installation location of the screen, and accordingly decide the installation position of the wall mount unit.  Refer to the section "Installation" in the user’ s manual included with the projector for more information.  ? ...

  • NEC NP01WK - page 9

    ENG-8 ENG-9 c Align the projector adapter with the holes on the bottom of the projector and securely attach the adapter with the four supplied screws (M4x20). d Loosen the vertical adjust/arm fixation knobs of the projector adapter . Caution Do not try to attach the projector adapter without the foam packing spacers in place. Otherwise the m ...

  • NEC NP01WK - page 10

    ENG-8 ENG-9 b a 3. Attach the arm to the wall adapter .  a Loosen the arm fixation screws (top and bottom) with the supplied hex wrench.  b Insert the arm plate (A) into the wall adapter from the top and tighten the screws (top and bottom) near the center of the elongated hole. * The covers (A) and (B) are to be attached after installa ...

  • NEC NP01WK - page 11

    ENG-10 ENG-11  b Use the two supplied M5.5x9.5 screws to securely attach the supplied plate (B) to the arm.  c Remove the cable cover of the projector . b c Plate (B) W ar ning If plate (B) is not installed, the projector may slide out of the arm and fall off, which may cause injury . ...

  • NEC NP01WK - page 12

    ENG-10 ENG-11 5. Cabling a The power cord and signal cables can be passed through the grooves for wiring on the left and right side of the arm. This should be done before attaching the arm cover . T ake care not to squeeze the cables with the horizontal adjust screws. This concludes the projector installation. ...

  • NEC NP01WK - page 13

    ENG-12 ENG-13 Adjusting the Pr ojection Position  Pr eparations Before adjusting • Project an image from the projector , then rst use the focus lever of the projector to roughly adjust the focus of the projected image.  For information on how to project an image,? ...

  • NEC NP01WK - page 14

    ENG-12 ENG-13 d c c T ur n the left or right knob to adjust projector tilt in the left or right direction. - When the knob shown in black in the illustration is tightened, the projector is rotated in the counterclockwise dir ection. d When the adjustm ent is complete, tighte n the opposite knob that is still loosened. 3. Adjust the horizontal ...

  • NEC NP01WK - page 15

    ENG-14 ENG-15 4. Adjust the tilt. Tilt adjustment is performed with the four adjustment knobs.  Front/r ear tilt adjustment Adjust together Rotation axis Adjust together Rotation axis  Left/right tilt adjustment Fine adjustment in same direction as for vertical adjustment • If tilt adjustment achieved with these knobs? ...

  • NEC NP01WK - page 16

    ENG-14 ENG-15 5. Attach the covers to the pr ojector adapter and the wall adapter . a Attach cover (A) (with hook) and cover (B) (with notch) to the upper side of the wall adapter . Slide the two covers towards the center while pushing them down, as shown in the illustration. The bottom of each cover will then engage with the screw heads of the ...

  • NEC NP01WK - page 17

    ENG-16 Specifications Product name: W all mount unit Model: NP01WK/NP01WK1 Adjustmentangle: Up-downangle±3°,left-rightangle±3°,inclinationangle±10° Adjustmentwidth: Front-r ear±100mm,left-right±50mm,up-down±50mm External dimensions: 280 (W) x 541(D) x 219 (H) mm Weight: Approx. 6 ...

メーカー NEC カテゴリー TV Mount

NEC NP01WKのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- NP01WKの取扱説明書
- NECの製品カード
- パンフレット
- またはNEC NP01WKの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NEC NP01WKの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、NEC NP01WKの取り付け説明書、サービスマニュアル、簡易説明書、またはNEC NP01WKのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NEC NP01WKの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

NEC NP01WKデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNEC NP01WKを使用するのを助ける技術的文書のことです。説明書は通常、全てのNEC NP01WKユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

NECの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. NEC NP01WKの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNEC NP01WKの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NEC NP01WKに関してこのドキュメントで見つけることができる全てのヒントの目次
3. NEC NP01WKデバイスの基本機能を使うにあたってのヒント。 NEC NP01WKのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NEC NP01WKに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNEC NP01WKのメーカー/サービスへの連絡先に関する情報。

NEC NP01WKについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもNEC NP01WKの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC NP01WKで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)