Kathrein BN 20610071の取扱説明書

24ページ 1.32 mb
ダウンロード

ページに移動 of 24

Summary
  • Kathrein BN 20610071 - page 1

    User manual UFX 314 data bus de-multiplexer (BN 20610071) ...

  • Kathrein BN 20610071 - page 2

    2 Contents Page General 3 1. Features 3 2. Mechanical layout 4 2.1 Rear view 4 2.2 Front view 4 2.3 Status LEDs 4 3. Installation 3.1 Installation 5 3.2 UFO ® compact controller 7 3.3 Network con fi guration 7 3.4 USB installation 8 3.4.1 Microsoft Windows 8 3.4.2 Linux 1 1 4. Software Update 11 5. Web interface 5.1 The main page 12 5.1.1 The dev ...

  • Kathrein BN 20610071 - page 3

    3 General 1. Features Q Facilitates the use of the USW 30 control software Q Required on the use of certain functions for some channel units, e. g. for NIT generation Q Can be used to update older UFO ® compact systems Q Control of individual channel units using UFO ® compact controller (from software version 9.20) or PC with control software USW ...

  • Kathrein BN 20610071 - page 4

    4 2. Mechanical layout The points are described in the plan view from left to right. 2.1 Rear view Redundant Power System Expansion connection for monitoring a redundant power supply , currently has no function Modem USB port for connecting a modem (see section 6) or a USB stick Power Power connection 12.5 V/approx. 200 mA (without controller or US ...

  • Kathrein BN 20610071 - page 5

    5 3. Installation 3.1 Installation The demultiplexer is installed in the 1 HU fan unit that is mounted above the base unit. For this purpose the following steps are required: Q Fit the UFX 314 into the 19” front panel (1 HU) supplied Q Remove the pre-assembled blanking plate Q Connect straight connectors on connecting cables to the demultiplexer ...

  • Kathrein BN 20610071 - page 6

    6 483 44 ( = 1H E) 355 ( = 8H E) K an al z u g 1 K an al z u g 1 2 Ka na l z ug 12 Ka na l z ug 1 Channel unit 1 Channel unit 12 Channel unit 1 Channel unit 12 ...

  • Kathrein BN 20610071 - page 7

    7 3.2 UFO ® compact controller The UFO ® compact controller can be connected to any of the demultiplexers. However , it is to be noted that the controller only operates with the demultiplexers that belong to the same group to which it is connected. The usage of an older UFO ® compact controller prior to software version 9.20 is in principle poss ...

  • Kathrein BN 20610071 - page 8

    8 3.4 USB installation 3.4.1 Microsoft Windows Y ou will fi nd the driver for the connection of a PC using USB on the USW 30 control software CD (not included). T o install the driver , you will need administrator permissions on the PC. The installation is described based on the English version of Windows XP . If the UFX 314 indicates an error aft ...

  • Kathrein BN 20610071 - page 9

    9 Ignore this message by clicking “Continue Anyway”. The driver is now installed. The driver installation is now complete. Windows con fi rms again that the driver has been installed. Note: After driver installation has been completed, a new network connection will be available (name “USB Ethernet/RNDIS”) which can be con fi gured and use ...

  • Kathrein BN 20610071 - page 10

    10 Click “Properties”. Select “Internet Protocol (TCP/IP)” and then click “Properties”. ...

  • Kathrein BN 20610071 - page 11

    11 The connection has now been setup. If there are still problems, contact your network administrator . 3.4.2 Linux The driver is included in Linux from version 2.6, you may need to re-compile the kernel to activate the support. On the USB the UFX 314 is identi fi ed by Linux as “USB Communication Class Ethernet device”. 4. Software update Y o ...

  • Kathrein BN 20610071 - page 12

    12 5. Web interface Every UFX 314 has a web interface that can be reached by entering the IP address for the demultiplexer in a web browser . Y ou can determine the address using USW 30 or KUBdate. 5.1 The main page The main page is divided into two areas, at the top the serial number , IP address and other links for the demultiplexer and below a l ...

  • Kathrein BN 20610071 - page 13

    13 5.3 Status page The Status page contains information on network addresses, software and hardware versions as well as the time and capacity utilisation. 5.4 Update page On this page you can update the device's software. Normally the software is updated using the application KUBdate. Y ou can extract the update archive from the Kathrein updat ...

  • Kathrein BN 20610071 - page 14

    14 Select here “Connect to the Internet” and then click “Next”. Now select “Set up my connection manually”. After selecting “Connect using a dial-up modem”, use “Next” to open the dialog box for the connection's name. ...

  • Kathrein BN 20610071 - page 15

    15 Enter a meaningful name for the connection to this demultiplexer as the name for the Internet service provider . Enter here the telephone number to which the demultiplexer is connected. Enter here the same user name and password as you have set using USW 30. A check mark must also be set at “Make this the default Internet connection”. If you ...

  • Kathrein BN 20610071 - page 16

    16 The “New Connection Wizard” is completed with this dialog box. If you want, you can select “Add a shortcut to this connection to my desktop” to be able to make the connection in future directly from the desktop. Otherwise, you will fi nd the connection in the network connections where you have just opened the wizard. This window always ...

  • Kathrein BN 20610071 - page 17

    17 If you are using an ISDN modem, click “Con fi gure”. Otherwise select the “Security” tab. With an ISDN modem you must change the “Modem protocol” setting to “V .120 (64k)”. After accepting your changes using “OK”, select the “Security” tab. ...

  • Kathrein BN 20610071 - page 18

    18 If “Show terminal window” or “Run script” is selected, clear the selection. Click “Advanced” and then click “Settings” to change the advanced security settings. In this dialog box, select as “Data encryption” “No encryption allowed” and then “Allow these protocols”. Only “Unencrypted password” is to be selected. A ...

  • Kathrein BN 20610071 - page 19

    19 Now click “Dial” to establish the connection. The settings made are saved and do not need to be made again next time. 6.2 Setting up in Linux It is recommended to use a terminal program with a graphic interface such as KPPP . It should be noted that all modems currently available with a USB interface have been primarily developed for Windows ...

  • Kathrein BN 20610071 - page 20

    20 Select the “Accounts” tab and click “New ...”. Select “Manual Setup” at the prompt. Enter a meaningful name for your connection in the “Connection name” box. Click “Add ...” to open a dialog box for entering the demultiplexer's telephone number . On the other tabs you can leave all the default settings. The default setti ...

  • Kathrein BN 20610071 - page 21

    21 Select the “Modems” tab and click “New ...”. Assign a name to your modem and select the appropriate connection in “Modem device”. Ensure the speed is not too high. On the “Modem” tab you can poll the modem to check whether you have selected the right connection and an appropriate speed. ...

  • Kathrein BN 20610071 - page 22

    22 Choose the connection you have just setup and, if you are using several modems, the correct modem. Then enter the same user name and password as you have set using USW 30. The connection is established using “Connect”. If you have not entered a password using USW 30 or have entered a blank password, the UFX 314 will accept every login, indep ...

  • Kathrein BN 20610071 - page 23

    23 Some authors of free software require that their name be mentioned. “This product includes software developed by Computing Services at Carnegie Mellon University (http://www .cmu.edu/computing/).” 7.3 Acknowledgements If you have any questions related to the open source software included, or to order the source code, contact the following ad ...

  • Kathrein BN 20610071 - page 24

    Internet: www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P .O. Box 100 444 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax + 49 8031 184-306 936.3429/A/1008/ZWT T echnical data subject to change. ...

メーカー Kathrein カテゴリー Network Card

Kathrein BN 20610071のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- BN 20610071の取扱説明書
- Kathreinの製品カード
- パンフレット
- またはKathrein BN 20610071の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Kathrein BN 20610071の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Kathrein BN 20610071の取り付け説明書、サービスマニュアル、簡易説明書、またはKathrein BN 20610071のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Kathrein BN 20610071の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Kathrein BN 20610071デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKathrein BN 20610071を使用するのを助ける技術的文書のことです。説明書は通常、全てのKathrein BN 20610071ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Kathreinの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Kathrein BN 20610071の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKathrein BN 20610071の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Kathrein BN 20610071に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Kathrein BN 20610071デバイスの基本機能を使うにあたってのヒント。 Kathrein BN 20610071のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Kathrein BN 20610071に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKathrein BN 20610071のメーカー/サービスへの連絡先に関する情報。

Kathrein BN 20610071についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKathrein BN 20610071の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKathrein BN 20610071で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)