-
Harbor Freight Tools 65836 - page 1
PORT ABLE UTILITY PUMP 65836 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by ...
-
Harbor Freight Tools 65836 - page 2
SKU 65836 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...
-
Harbor Freight Tools 65836 - page 3
SKU 65836 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. ...
-
Harbor Freight Tools 65836 - page 4
SKU 65836 For technical questions, please call 1-800-444-3353. Page 4 proved for the specic hazards in the work area. Power tool use and care 4. Do not force the power tool. Use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power too ...
-
Harbor Freight Tools 65836 - page 5
SKU 65836 For technical questions, please call 1-800-444-3353. Page 5 • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Inter- rupter (GFCI) should also be imple- mented – it prevents sustained elec- trical shock. W ARNING: Handling the cord on 6. this product will expo ...
-
Harbor Freight Tools 65836 - page 6
SKU 65836 For technical questions, please call 1-800-444-3353. Page 6 of electric shock. (See 3-Prong Plug and Outlet.) The grounding prong in the plug is 2. connected through the green wire in- side the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must nev ...
-
Harbor Freight Tools 65836 - page 7
SKU 65836 For technical questions, please call 1-800-444-3353. Page 7 dition. Always replace a damaged extension cord or have it repaired by a qualied electrician before using it. Protect the extension cords from 8. sharp objects, excessive heat, and damp or wet areas. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOL T) NAMEPLA T ...
-
Harbor Freight Tools 65836 - page 8
SKU 65836 For technical questions, please call 1-800-444-3353. Page 8 SPECIFICA TIONS Electrical Requirements 1 15 V~ / 60 Hz / 8.4 A Pumping Capacity 1500 GPH Max. Inlet & Outlet Size 1” x 1 1.5 TPI (Standard Hose Size) Pump Lift Capacity 120 Feet UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any par ...
-
Harbor Freight Tools 65836 - page 9
SKU 65836 For technical questions, please call 1-800-444-3353. Page 9 T ool Set Up TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. This pump operates immediately 1 ...
-
Harbor Freight Tools 65836 - page 10
SKU 65836 For technical questions, please call 1-800-444-3353. Page 10 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Unplug the tool from its electrical outlet before performing any inspection, maintenance, o ...
-
Harbor Freight Tools 65836 - page 11
SKU 65836 For technical questions, please call 1-800-444-3353. Page 1 1 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start No power at outlet. 1. Cord not connected. 2. Worn out or damaged Carbon 3. Brushes. Check power at outlet. 1. Check that cord is plugged in. 2. Replace Carbon Brushes. 3. Pump operates but does not ...
-
Harbor Freight Tools 65836 - page 12
SKU 65836 For technical questions, please call 1-800-444-3353. Page 12 ASSEMBL Y DIAGRAM ...
Harbor Freight Tools 65836についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 65836の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 65836で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。