Grundig STR 400 APの取扱説明書

32ページ 0.53 mb
ダウンロード

ページに移動 of 32

Summary
  • Grundig STR 400 AP - page 1

    SA TELLITE TV RECEIVER STR 322 TWIN SA TELLITE TV RECEIVER + Antenna-Positioner STR 400 AP ...

  • Grundig STR 400 AP - page 2

    ķ 2 Installation and Safety Precautions Installation and Safety Precautions........................... 3 Protect Y our Environment! ..................................... 3 Connection Examples Connection Examples ........................................... 4 Buttons on the Remote Control Handset Buttons on the Remote Control Handset ............... ...

  • Grundig STR 400 AP - page 3

    ķ 3 POWER STORE/CLEAR EDIT/COPY TUNING DSR/FM ATS POWER STORE/CLEAR EDIT/COPY TUNING DSR/FM ATS POWER STORE/CLEAR EDIT/COPY TUNING DSR/FM ATS POWER STORE/CLEAR EDIT/COPY TUNING DSR/FM ATS +40 +5 0 POWER STORE/CLEAR EDIT/COPY TUNING DSR/FM ATS 10 cm This satellite receiver is intended for reception of picture and sound signals. Any other applicatio ...

  • Grundig STR 400 AP - page 4

    ķ 4 Connection Examples 910 . . .2050MHz 14/19V 0.5A ɯ B É REM. CONTR. VCR R AUDIO OUT EURO AV TV EURO AV DECODER EURO AV VCR ǵ e n STR 400 AP GAW 8951 220-240V~ 50/60Hz j B Z T 705 K 93 U00 220 - 240V ~ 50 - 60Hz ON OFF INPUT - SA T L 36V/2.5A 0/12V/0.1A AGC GND 5V/0.2A POL. MAGN. GND M2 M1 LNC LN C LN C MAG. POL. A } OMT 11 GHz 12,5 GHz A xxx ...

  • Grundig STR 400 AP - page 5

    ķ 5 Connection Examples TV Decoder VCR STR 400 AP TV Radio terr . HF-Signal LR HiFi-Amplifier ŀ ŀ Decoder VCR Remote Control (Timer) Ant. Control ASTRA T wo aerial systems can be connected to the aerial inputs of the SA T receiver , for example: Input A: Rotary system. Control takes place via the "Ant. Control." connections. Input B: F ...

  • Grundig STR 400 AP - page 6

    ķ 6 Buttons on the Remote Control Handset 1 0 … 9 – The desired programme position is directly selected with the numeric buttons, e.g. 123. When selecting a multi-digit programme position, the numbers are entered in sequence from left to right. For example, enter 1, 2, and 3. When you enter the digit 1, the following appears in the display: If ...

  • Grundig STR 400 AP - page 7

    ķ 7 2 ¢ TV Certain TV sets select automatically the A V mode when switching on the SA T receiver . Y ou can switch back to terrestrial reception mode by pressing the ¢ TV button. 3 . Opens the Timer menu and switches back to the current programme. 4 - Shift button for switching to the second remote control level for a 2nd SA T receiver .** 5 – ...

  • Grundig STR 400 AP - page 8

    Buttons and Connections on the Receiver ķ 8 Front of Unit ßU P ANDA logo of Panda/Wegener Communications Inc.. Award for excellent sound quality . ´I I99 2 1 / 2 -digit display (for programme position number). ´? XXXXXXXX 8-digit display ´` STEREO Stereo indication ´Q TIMER Indication; lit when Timer menu is active. ´W “ 1 “ 2 “ 3 “ ...

  • Grundig STR 400 AP - page 9

    ķ 9 Buttons and Connections on the Receiver Rear of Unit qZ INPUT A Connection for satellite aerial (input A). qU INPUT B Connection for satellite aerial (input B). wI Ƕ _ Ƕ Ƕ _ On/Off button for LNC supply voltage. ON...OFF w? É T errestrial aerial input (VHF/UHF). w` ɯ Modulator aerial output (VHF/UHF). wQ REM. CONTR. VCR Connection for rem ...

  • Grundig STR 400 AP - page 10

    ķ 10 Important Information General For the description of the unit´s functions, it is assumed that the aerial has correctly been installed and that the receiver has correctly been connected. Button Lock When switching the receiver off by means of the POWER ¢ I Ǽ switch, or with the remote control handset to standby , the lock is activated again ...

  • Grundig STR 400 AP - page 11

    ķ 11 Attention! It is not allowed to use these limits to protect the aerial from running against obstructions. If a test run should be necessary for adjustments at a later date, these limits would be overridden and the aerial thus could be dama- ged. The following illustration shows the relations. General A polarmount aerial is constructed so that ...

  • Grundig STR 400 AP - page 12

    ķ 12 Setting the Zero Position and Limits Driving the exactly mounted aerial to the east end stop Before setting the limits L 1 (East) and L 2 (West), it is absolu- tely necessary that the aerial has been driven to its mechani- cal east end stop for setting the internal counter to zero. The aerial must be mounted in such a way that no obstruc- tio ...

  • Grundig STR 400 AP - page 13

    ķ 13 Basic Adjustment of the Polarmount Aerial S ystem 1 Frequency switching with 14/18 V , e.g., Grundig package STP 400/STP 300 A, or 0/12 V , e.g., Grundig package STP 300, or with 0/22 kHz, e.g., future Astra solution. Polarization switching: exclusively with motor -driven or magnetic polarizer . Frequency Polarization LNC power Preprogrammed ...

  • Grundig STR 400 AP - page 14

    Basic Adjustment of the Polarmount Aerial ķ 14 STR 400 AP installation mode (LNC frequency entry) Press and hold down the ¢ V/H button and switch the unit on. Indication after 3 seconds. with ¢ < / > buttons switch to ¢ MODE ɶ ɶ ¢ MODE ɶ ɶ system selection with ¢ < / > buttons ¢ MODE ɶ ɶ ¢ MODE ɶ ɶ with system 1 or 2 wit ...

  • Grundig STR 400 AP - page 15

    ķ 15 Basic Adjustment of the Polarmount Aerial Installation Menu With the unit switched off, press and hold down the ¢ V/H button and switch the unit on. The display indicates " INSTALL ". The preceding diagram shows an overview of the installation menu. After approx. 3 seconds, the display indication chan- ges to " INPUT A ". ...

  • Grundig STR 400 AP - page 16

    Basic Adjustment of the Polarmount Aerial ķ 16 Manual motor control with the remote control After pressing the ¢ F ( ßR ) button, you have 8 seconds for manually controlling the motor with the xc buttons. Pressing the O button stores the new aerial position in memory . The display indicates, for example: Neutral adjustment It is possible to conn ...

  • Grundig STR 400 AP - page 17

    ķ 17 Buttons and their Functions on the Receiver ¢ P/F – Selecting Programme/Frequency Ku-Band reception (10700 to 13000 MHz) Use the ¢ P/ F button to switch between programme posi- tion mode and frequency entry mode. The display indicates the programme positions 1 to 199 or , in frequency entry mode, 10700 to 13000 MHz. Real reception, howeve ...

  • Grundig STR 400 AP - page 18

    Buttons and their Functions on the Receiver ķ 18 Examples: IF 1: Entry: Indication: 1200 MHz 01200 11200 Mz 950 MHz 00950 10950 Mz Please also observe setting of the video deviation –1, –2 or –3 (see paragraphe " ¢ Video – Adjusting the Video Deviation"). ¢ ¢ V/H – Selecting V ertical/Horizontal Polarization and Input A/B Pr ...

  • Grundig STR 400 AP - page 19

    ķ 19 Buttons and their Functions on the Receiver ¢ ʐ – Aerial positioning / designating the satellite position and station Aerial positioning Pressing the ¢ ʐ button calls up a submenu with functions for adjusting the aerial and naming the stations and satellites. The diagram below provides you with an overview. These functions have already ...

  • Grundig STR 400 AP - page 20

    Buttons and their Functions on the Receiver ķ 20 Overview diagram of the aerial adjustment submenu Button for calling up the aerial adjustment functions. T o access the submenu for naming the aerial position and stations, press the ¢ MODE ɶ ɶ / ʺ ʺ buttons. ¢ ʐ MAN (Manual aerial control) ¢ ʐ    ¢ MODE ɶ ɶ / ʺ ʺ Naming the a ...

  • Grundig STR 400 AP - page 21

    ķ 21 The MODE Menu Overview Normal case (e.g. programme mode) ➞ ¢ MODE ɶ ɶ ¢ MODE ɶ ɶ COPY (copy programme) ¢ MODE ɶ ɶ SORT (exchange programme) ¢ MODE ɶ ɶ O VOL T/ 12 VOL T (switching voltage) ¢ V/H (e.g. " H 1 18 V ") ➞ ¢ MODE ɶ ɶ ¢ MODE ɶ ɶ SKEW: –99 … 128 (polarizer adjustment) ¢ MODE ɶ ɶ SKEW ALL (trans ...

  • Grundig STR 400 AP - page 22

    The MODE Menu ķ 22 Use the ¢ MODE ɶ ɶ / ʺ ʺ buttons to select the individual set- ting functions. Changing the settings in the respective mode then is carried out with the ¢ < / > buttons or with the numeric buttons on the remote control handset. Repeated pressures on the ¢ MODE ɶ ɶ / ʺ ʺ buttons will bring you to the menu options ...

  • Grundig STR 400 AP - page 23

    ķ 23 The MODE Menu SKEW ALL – T ransferring the Skew Value After having adjusted the optimum value for a polarization plane, e.g., horizontal, in the "SKEW" menu option (polarizer adjustment), press the ¢ MODE ɶ ɶ button once again. The display indicates " SKEW ALL ". Store with the ¢ MEMORY button. The optimum skew value ...

  • Grundig STR 400 AP - page 24

    The MODE Menu ķ 24 MODULA T . – Adjusting the Modulator Channel The display indicates " MODULAT . " . With the ¢ < / > buttons, it is possible to select an HF chan- nel between CH 25 and CH 60 of the PLL modulator . The fac- tory-presetting is 36 (CH 36). The TV receiver needs to be connected via the HF output of the SA T receiv ...

  • Grundig STR 400 AP - page 25

    ķ 25 The MODE Menu DISPLA Y – Display Brightness Y ou can adjust the display brightness with the ¢ < / > but- tons. When the limits of the control range are reached, the display indicates for approx. 3 seconds " MINIMUM " and " MAXIMUM " , respectively . ACTIVE/ INACTIVE Programme Position At the factory , the receiver ...

  • Grundig STR 400 AP - page 26

    Remote Control Functions ķ 26 b Standby With the b button, the receiver is switched to standby . The display indicates " Ǽ " . LNC, switching- and AV voltages are switched off. When in standby , pressing one of the numeric buttons 0 … 9 switches on the corresponding programme. When using the ]| buttons, the receiver switches to the la ...

  • Grundig STR 400 AP - page 27

    ķ 27 Universal Remote Control Handset The T elepilot TP 720 SA T supplied with the receiver can be used not only for the satellite receiver STR 400 AP but also for a number of GRUNDIG SA T receivers and equivalent receivers of other manufacturers. In addition, it can be used for the remote control of a large number of video recorders and TV sets o ...

  • Grundig STR 400 AP - page 28

    ķ 28 TIMER Menu Timer and Video Recorder In the Timer menu, it is possible to programme the SA T receiver so that it automatically switches on and off on a certain pro- gramme position at certain times for recording with a video recorder which is programmed with the same times. It is possi- ble to switch on and off four different programmes at tim ...

  • Grundig STR 400 AP - page 29

    ķ 29 Clearin g a T imer position It is possible to clear a programmed Timer position in the fol- lowing way: Press the . button to open the Timer menu. Select the desired Timer position with the xc buttons. (The above steps are not necessary if you are already in the Timer menu and the desired T imer position is selected). Press the | button. The ...

  • Grundig STR 400 AP - page 30

    ķ 30 Specification Reception range: Satellite signals of 10700 ... 13000 MHz, according to used LNC, (Ku-band) C- and S-band frequencies: 2500 ... 4000 MHz IF input of tuner: 910 ... 2050 MHz, two signal inputs (A, B) T uning system: Frequency synthesizer with direct frequency entry . Forward in 10 MHz steps. Reverse in 3 MHz steps. Single steps o ...

  • Grundig STR 400 AP - page 31

    Pin Assignment of the EURO-A V Sockets Additional Information for Units sold in Great Britain Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply. In case this appliance is supplied with a Safet y Standard A pproved mains lead fitted with a non-rewireable 13 Amp mains plug which, if unsuitable for your socket, should be ...

  • Grundig STR 400 AP - page 32

    GRUNDIG AG • D - 90762 FÜRTH Printed in Ger many . 4/10 Mü 1 2 3 4 5 6 7 8 9 ķ 21107-941.63 ...

メーカー Grundig カテゴリー Car Satellite Radio System

Grundig STR 400 APのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- STR 400 APの取扱説明書
- Grundigの製品カード
- パンフレット
- またはGrundig STR 400 APの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Grundig STR 400 APの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Grundig STR 400 APの取り付け説明書、サービスマニュアル、簡易説明書、またはGrundig STR 400 APのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Grundig STR 400 APの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Grundig STR 400 APデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGrundig STR 400 APを使用するのを助ける技術的文書のことです。説明書は通常、全てのGrundig STR 400 APユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Grundigの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Grundig STR 400 APの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGrundig STR 400 APの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Grundig STR 400 APに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Grundig STR 400 APデバイスの基本機能を使うにあたってのヒント。 Grundig STR 400 APのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Grundig STR 400 APに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGrundig STR 400 APのメーカー/サービスへの連絡先に関する情報。

Grundig STR 400 APについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGrundig STR 400 APの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGrundig STR 400 APで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)