-
D-Link DWL-810 - page 1
Air DWL-810 2.4GHz Ethernet-to-Wireless Bridge Manual Rev. 070802 Building Netw orks for People ...
-
D-Link DWL-810 - page 2
2 Contents 1. P ac ka ge Contents ............................... 3 2. Intr oduction ......................................... 4 3. W ir eless Basics ................................... 7 4. Getting Star ted .................................. 10 5. W e b Configur a tion ............................. 12 6. Installa tion ............................. ...
-
D-Link DWL-810 - page 3
3 1. P ac kage Contents Contents of Package: • D-Link Air DWL-810 Ethernet-to-Wireless Bridge • AC Power Adapter – 5V; 2.5A • Manual on CD • Ethernet Cable • Quick Installation Guide If any of the above items are missing, please contact your reseller. System Requirements: • A device, such as a game console, laptop or desktop computer, ...
-
D-Link DWL-810 - page 4
4 2. Intr oduction The D-Link Air DWL-810 Ethernet-to-Wireless Bridge is a device that can be implemented in a variety of ways to provide wireless access by converting an Ethernet connection. For devices with a built-in Ethernet port, the DWL- 810 provides a cost effective way to gain wireless connectivity, virtually transforming wired devices into ...
-
D-Link DWL-810 - page 5
5 Features and Benefits • Transforms an Ethernet port into a wireless connection • Fast 11Mbps wireless connection which is fully compatible with standard 802.11b-compliant devices • Equipped with a 10Base-T Ethernet port • Easy and Fast Wireless connectivity for Ethernet devices • Supports Ad Hoc or Infrastructure modes • Easy web-base ...
-
D-Link DWL-810 - page 6
6 Connections Reset Button – press this button to revert to the factory default settings of the DWL-810 Power Receptor – connect one end of the included 5V DC Power Adapter into the power receptor on the DWL-810 and connect the other end of the Power Adapter to a power outlet. Default Settings Operating Mode Ad-Hoc SSID default Channel 6 Transm ...
-
D-Link DWL-810 - page 7
7 3. W ir eless Basics With the DWL-810 you can provide instant wireless access to the LAN (Local Area Network) for Ethernet-enabled devices. Simply plug the DWL-810 into the Ethernet port of a network device (such as a printer or web camera) for an immediate wireless connection with another device equipped with a wireless network adapter set to Ad ...
-
D-Link DWL-810 - page 8
8 Wireless Basics Now, without an Access Point, or a wireless LAN, you can access a ne twork device (such as a network printer, network scanner, web camera or gaming consoles) wirelessly, quickly and easily, with no need for configuration u sing the DWL-810. People use wireless LAN technology for many different purposes. Mobility - Productivity inc ...
-
D-Link DWL-810 - page 9
9 Wireless Basics The DWL-810 is fully compatible with the recently introduced D-Link AirPlus family of products that include: Enhanced 2.4GHz Wireless Cardbus Adapters used with laptop computers (DWL-650+) Enhanced 2.4GHz Wireless PCI cards used with desktop computers (DWL-520+) Wireless Access Points (DWL-900AP+) Standards - Based Tec ...
-
D-Link DWL-810 - page 10
10 Wireless Basics sure that the Access Points an d Adapters are positioned so that the signal will travel straight through a wall or ceiling for better reception. 3. Building Materials make a difference - A solid metal door or aluminum studs may have a negative effect on range. Try to position the DWL-810, the Access Points, and computers with wir ...
-
D-Link DWL-810 - page 11
11 Getting Started Setup #2: This example illustrates an Infrastructure setup. To connect the DWL-810 to a wireless network with a switch or router, please refer to the Quick Installation Guide. Web configuration is required to connect the DWL- 810 in Setup #2. Setup #2 ...
-
D-Link DWL-810 - page 12
12 5. W eb Configur ation Configuration is required only if you will be using the DWL-810 in Infrastructure mode. If you will be using the DWL-810 in Infra structure mode or if you need to configure the DW L-810, please co nsider the following before using the Web Configuration: Factory Default Settings for the DWL-810 Operating Mode Ad- H o c SSID ...
-
D-Link DWL-810 - page 13
13 Web Configuration Access the Web Configuration by opening the web-browser and typing in the IP Address of the DWL-810. The DWL-810 default IP Address is http://192.168.0.30 , as shown below: (The IP Address shown in the example above is the default setting. Use this IP address when connecting to a network consisting of other D-Link devices set t ...
-
D-Link DWL-810 - page 14
14 Web Configuration Select Wireless in the menu, as shown. A wireless table will appear as shown below. The various input fields may be used to configure the 802.11b wireless and security settings. Wireless Fig. 5.4 Operating Mode: Ad-Hoc - is the default setting. Choose Ad-Hoc or Infrastructure . (Connect right out of the bo x with the Ad-Hoc set ...
-
D-Link DWL-810 - page 15
15 Web Configuration Transmission Rate: Automatic is the default setting. Choose the the transmission rate of the DWL-810 from the pull-down menu. Access Point Density: This field describes the densit y of the Access Points and the traffic level of the wireless network running on Infrastructure Mode, which is determined by the number of Access Poin ...
-
D-Link DWL-810 - page 16
16 Web Configuration Shared Key Authentication: By default, this is not selected. If you would like to include a WEP check before allowing connection on the network, select this item. If it remains unselected, only the SSID will be checked before authorizing connection. Click Apply to update the settings. Click Cancel to discard any changes you hav ...
-
D-Link DWL-810 - page 17
17 Web Configuration Static IP Address Bridge Name: The default setting is to leave this field blank. Y ou m ay en ter a name for the DWL-810. This is optional. Allow Upgrade Uploads: When upgrading firmware, select this checkbox. Deselect this checkbox during normal operation, when not upgrading firmware. After completing the configuration, click ...
-
D-Link DWL-810 - page 18
18 Web Configuration Admin Click on Admin in the menu. An Admin window will appear. Here you can change the password, restart the DWL-810 or reset it to factory default. Change Password: You can use a password to prevent tampering with the configuration of the DWL-810. By default, no password is required. However, if you choose to use a password, t ...
-
D-Link DWL-810 - page 19
19 Web Configuration Help Click on Help in the menu to see an explanation of the items in the Configuration menu. About Click on About in the menu to see the full name of the DWL-810. 6. Installa tion After you have configured the DWL-810, or if you are using Ad-Hoc mode, you are ready to connect it to a network device to achieve wireless transmiss ...
-
D-Link DWL-810 - page 20
20 3. Turn on the power of the DWL-810 by connecting one end of the power adapter (included with your purchase) into the power port on the DWL-810, and connecting the other end into the AC power outlet on your wall. 4. The DWL-810 will automatically detect the MAC address of the network device to which it is connected, and begin wireless transmissi ...
-
D-Link DWL-810 - page 21
21 • The DWL-810 Ethernet-to-Wireless Bridge has a default channel of 6 . Make sure that the channel on the DWL-810 Ethernet-to- Wireless Bridge is exactly the same as the channel on the other wireless client. 4. I cannot connect to an access point or wireless router. • The DWL-810 Ethernet-to-Wireless Bridge has a default wireless setting of A ...
-
D-Link DWL-810 - page 22
22 Network Architecture: • Supports Ad-Hoc Mode (Peer-to-Peer wi thout Access Point) or Infrastructure Mode (Communications to wired networks via Access Points with Roaming) Antenna: • Internal Diversity Patch Frequency Range: • 2.4 – 2.4835 GHz, Direct Sequence Spread Spectrum (DSSS) Transport Protocols: • TCP/IP Physical Dimensions: • ...
-
D-Link DWL-810 - page 23
23 • Operating Voltage: +5V 2.5A Operating Channels: • 1-11 United States (FCC) Safety: • UL 9. Contacting T ec hnical Suppor t You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this produc ...
-
D-Link DWL-810 - page 24
24 10. W ar ranty and Registr ation D-Link Systems, Inc. (“D-Link”) prov ides this 1-Year warranty fo r its product only to the person or entit y who originally purchased the product from: • D-Link or its authorized reseller or distributor. • Products purchased and delivered with the fifty Un ited States, the District of Columbia, US Posses ...
-
D-Link DWL-810 - page 25
25 product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with t he foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not co ver: Prod ucts tha ...
D-Link DWL-810についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもD-Link DWL-810の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがD-Link DWL-810で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。