Dixon Zeeter ZTRの取扱説明書

48ページ 0.85 mb
ダウンロード

ページに移動 of 48

Summary
  • Dixon Zeeter ZTR - page 1

    ZTR ® OPERATORS MANUAL ZEETER MODEL 2003 ...

  • Dixon Zeeter ZTR - page 2

    IMPORTANT - READ CAREFULLY The Dixon ® ZEETER ® Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operators manual carefully and become completely familiar with the controls. The information contained in th ...

  • Dixon Zeeter ZTR - page 3

    3 INDEX Page Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Warranty Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 14-16 Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19 Operation Instructions. . . . . . . . . . ...

  • Dixon Zeeter ZTR - page 4

    4 RIDING LAWN MOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH. The most common causes of injury to the operator or bystander... ...read and understand this manual to prevent injuries. BLADE CONTACT TIP OVER RUN OVER BACK OVER SAFETY ...

  • Dixon Zeeter ZTR - page 5

    5 Safety Alert Symbol When you see this symbol, BE ALERT to the potential for injury. DANGER (highlighted in red) indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING (highlighted in orange) indicates a potentially hazardous situation which, if not avoided, could result in death or serio ...

  • Dixon Zeeter ZTR - page 6

    6 Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: Read, understand, and follow all instructions in the manual and on the mower before starting. Only allow responsible adults, who are familiar with the instructions, to operate the mower. Clear the area of objects such as rocks ...

  • Dixon Zeeter ZTR - page 7

    7 GENERAL OPERATION (continued) : Turn off blades when not mowing. Stop engine before removing grass catcher or unclog- ging chute. Mow only in daylight or good artificial light. Do not operate the mower while under the influence of alcohol or drugs. Watch for traffic when operating near or crossing road- ways. Use extra care when ...

  • Dixon Zeeter ZTR - page 8

    8 SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it! DO Mow across the slope with your Dixon ZTR - never up or down. Remove obstacles such as rocks ...

  • Dixon Zeeter ZTR - page 9

    9 Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly down the slope. If front wheels lift off the ground, pull the levers back to stabilize the mower. DO NOT Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible. Do not mow near drop-offs, di ...

  • Dixon Zeeter ZTR - page 10

    10 SAFETY CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. Keep children out of the mowing area and under the watchful care of another responsible adu ...

  • Dixon Zeeter ZTR - page 11

    11 SERVICE: Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. Use only an approved container. Never remove fuel cap or add fuel with engine running. Allow engine to cool before refueling. Do not smoke while refueling. Never refuel the mower indoors. Never store the mower or fuel container inside a ...

  • Dixon Zeeter ZTR - page 12

    12 SERVICE (continued): Never run a mower inside a closed area. The exhaust fumes are toxic. Keep nuts and bolts tight, especially blade attachment bolts, and keep equipment in good condition. Never tamper with safety devices. Check their proper operation regularly. Keep mower free of grass, leaves, or other debris buildup. Clean up oil ...

  • Dixon Zeeter ZTR - page 13

    13 WARRANTY: Home Owner Application: Dixon Transaxle Models, used only at owners primary place of residence are warranted for a period of two (2) years from date of purchase. Commercial Application: defined as use other than, or in addition to, mowing at owners primary place of residence. Dixon Transaxle Models, used in commercial application ...

  • Dixon Zeeter ZTR - page 14

    14 SPECIFICATIONS ZEETER 30 CHASSIS: 11 gauge welded channel frame BODY: All body parts made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 11 G A stamped steel construction. Single 30 cut blade. Cut height approximately 1-1/2- 4 via ...

  • Dixon Zeeter ZTR - page 15

    15 SPECIFICATIONS ZEETER 36 CHASSIS: 11 gauge welded channel frame BODY: All body parts made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 11 GA laser cut fabricated. 36 cut width. Cut height approximately 1-1/2- 4 via 7-position lif ...

  • Dixon Zeeter ZTR - page 16

    16 SPECIFICATIONS ZEETER 42 CHASSIS: 11 gauge welded channel frame BODY: All body parts made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow transmission service. MOWER DECK: 13 GA stamped steel construction. Three blades combine for a 42 cut width. Cut height approximately ...

  • Dixon Zeeter ZTR - page 17

    17 CONTROLS CONTROL LEVERS TO GO FORWARD: • From neutral position, gently push both control levers forward. • To increase speed, move levers further forward. TO GO BACKWARD: • From neutral position, gently pull both control levers toward you. TURNING: • Turning is controlled by moving one control lever slightly forward or rearward of the ot ...

  • Dixon Zeeter ZTR - page 18

    18 CAUTION CONTROLS The Dixon ZEETER has a unique transaxle that requires only two drive levers to control braking, turning, speed and direction. On initial operation, set throttle speed on slow. Operate with mower blade in OFF position. To avoid over-controlling the mower, use a light touch on the drive levers. Slight movements using f ...

  • Dixon Zeeter ZTR - page 19

    19 CONTROLS TRANSMISSION DRIVE SYSTEM Allows the mower to turn on its own axis ZERO TURNING RADIUS. Each lever controls one side of the mower. NOTE: The pressure required to operate the mower is very light. BLADE DRIVE (30): • Located to left of the operator. • To engage the mower blade, turn lever on floor slowly to the ON posit ...

  • Dixon Zeeter ZTR - page 20

    20 OPERATION INSTRUCTIONS The safe and successful operation of the ZEETER Mower will depend upon the operator having the correct knowl- edge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and their functions. During initia ...

  • Dixon Zeeter ZTR - page 21

    21 OPERATION INSTRUCTIONS BEFORE OPERATING MOWER: 1 . Read and observe all safety instructions o n your mower and in the manual. 2 . Read engine manufacturers operating and mainte- nance instructions. 3 . Check engine oil. 4 . Check fuel cap to be sure it is in place. 5 . Be sure parking brake is on. 6 . Mower blade drive is off. 7 . Know how to ...

  • Dixon Zeeter ZTR - page 22

    22 OPERATION INSTRUCTIONS STARTING INSTRUCTIONS: 1 . Parking brake must be on, and blade drive disen- gaged. 2 . Move throttle control to choke position if engine is cold,full throttle if warm. 3 . Insert ignition key and turn to start position. When engine starts, release ignition key. Key will return to run position. 4 . Move th ...

  • Dixon Zeeter ZTR - page 23

    23 OPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMS: Do not operate mower if safety switches are not operating properly. PARKING BRAKE SWITCH TEST: a) Place parking brake in OFF position. b) Turn ignition switch to START. ENGINE SHOULD NOT TURN OVER OR ATTEMPT TO START! BLADE DRIVE SWITCH TEST: a) Place parking brake in ON position. b) En ...

  • Dixon Zeeter ZTR - page 24

    24 OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the troubleshoot- ing guide. CAUTION Be sure that the deflector is properly installed on the discharge chute. 1 . Set engin ...

  • Dixon Zeeter ZTR - page 25

    25 OPERATION INSTRUCTIONS GRASS HEIGHT AND CUTTING SUGGESTIONS: Do not attempt to cut grass when it is wet. If the grass is tall, place the mower deck cut height lever in the top or second notch. Initially overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting. Keep the underside of the m ...

  • Dixon Zeeter ZTR - page 26

    26 OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all of the recycled or mulched clippings. In order to achieve the b ...

  • Dixon Zeeter ZTR - page 27

    27 OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT (continued): 6. Keep the underside of the mower deck clean. Remove all grass and dirt build-up from the underside of the pan, the baffles and deflectors after each use. 7. Alternate mower direction. This will evenly disperse the mulched grass clippings over the lawn for even fertilization. ...

  • Dixon Zeeter ZTR - page 28

    28 CARE AND MAINTENANCE CAUTION CAUTION CAUTION CAUTION CAUTION Bef Bef Bef Bef Bef ore perf ore perf ore perf ore perf ore perf or or or or or ming an ming an ming an ming an ming an y maintenance y maintenance y maintenance y maintenance y maintenance , tur , tur , tur , tur , tur n off engine n off engine n off engine n off engine n off engine , ...

  • Dixon Zeeter ZTR - page 29

    29 CARE AND MAINTENANCE ENGINE: For complete maintenance and operating information of the engine, please refer to the maintenance instructions furnished by the engine manufacturer and included in your Zero Turn Radius mower information packet. BATTERY: • This is a maintenance-free battery and the fluid level cannot be checked. • Charge battery ...

  • Dixon Zeeter ZTR - page 30

    30 CARE AND MAINTENANCE CUTTER BLADE MAINTENANCE: CAUTION Stop engine and remove ignition key for safety. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade. Blades should be discarded when worn excessively. Check sharpness of mower blades after every 10 hours of operation. Observe proper blade position prior ...

  • Dixon Zeeter ZTR - page 31

    31 CARE AND MAINTENANCE TIRES: Correct tire pressure is essential for efficient operation of the mower. Check tire pressure periodically. Inflate tires to the pressure listed below. Front tires (9 x 3.50-4) 16-21 lbs. Rear tires (16 x 6.50-8) 8-14 lbs. Lug nuts or lug bolts should be checked regularly for tightness. ...

  • Dixon Zeeter ZTR - page 32

    32 BELTS: Check belts every 50 hours. Replace any belts found to be in poor condition. BELT TENSION Transaxle Drive Belt (all Zeeter Models) - P/N 7650 No adjustment required. 30 Zeeter Manual clutch - P/N 7725 No adjustment required. 36 Zeeter Electric Clutch - P/N 14136 Adjust idler shock mount per diagram. Idler Weldment L Rod Idler ...

  • Dixon Zeeter ZTR - page 33

    33 Idler Weldment L Rod Idler Shock Mount Hex Nut 3 4 Tighten or Loosen Hex Nut to achieve this dimension 42 Zeeter Mower Deck Serpentine Belt Electric Clutch - P/N 6109 Adjust idler shock mount per diagram. Engine to Mower Deck Belt - P/N 5861 No adjustment required. Correct belt tension is maintained through a fixed engine location and a ...

  • Dixon Zeeter ZTR - page 34

    34 CARE AND MAINTENANCE Deck Removal - Zeeter 30 1 . Place cut height lever in lowest cut position. 2 . Loosen belt keepers. 3 . Remove deck drive belt from engine pulley. 4 . Using a slight upward twisting motion, remove link from engagement handle. 5 . Turn handle fully to the left until handle clears stop on mower deck pan. Lift handle then r ...

  • Dixon Zeeter ZTR - page 35

    35 CARE AND MAINTENANCE Deck Removal - Zeeter 36 1 . Place cut height lever in lowest cut position. 2 . Loosen nut on belt idler shock mount until belt can be removed from electric clutch pulley on the bottom of the engine. Refer to illustration. 3 . Remove hair pin cotter and washer from one end of deck support cross shaft. Note location of rem ...

  • Dixon Zeeter ZTR - page 36

    36 Deck Removal - Zeeter 42 CARE AND MAINTENANCE 1 . Place cut height lever in lowest cut position. 2 . Pull belt idler back to allow belt to be removed from idler pulley and electric clutch pulley. 3 . Remove hair pin cotter and washer from one end of deck support cross shaft. Note location of remaining shim washers used between chassis and mow ...

  • Dixon Zeeter ZTR - page 37

    37 CARE AND MAINTENANCE LUBRICATION: CHASSIS: (5) for 30 (6) for 36 (7) for 42 LOCATIONS: (1) each front wheel caster & front wheel hub (1) each mower deck hub SERVICE INTERVALS: Every 50 hours of operation RECOMMENDED GREASE: Name brand wheel bearing or multi-purpose grease.Once per season or 50 hours of operation (3 pumps each) ...

  • Dixon Zeeter ZTR - page 38

    38 CARE AND MAINTENANCE CHANGING THE ENGINE OIL: 1 . The oil drain valve is located on the lower left side of the engine crankcase. 2 . Place a suitable container under the drain valve. 3 . To drain, remove plug from 90 o fitting. 4 . After engine is drained, replace drain plug. NOTE: Refer to engine manufacturers recommenda- tions for frequency ...

  • Dixon Zeeter ZTR - page 39

    39 OIL FILL: 1 . Drain oil. 2 . Clean any spilled oil from engine and chassis. 3 . Replace drain plug. 4 . Refill engine with type, and quantity of oil recom- mended by the engine manufacturer in engine literature. PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. PROTECT YOUR ENVIRONMENT. CARE AND MAINTENANCE ...

  • Dixon Zeeter ZTR - page 40

    40 CARE AND MAINTENANCE DRIVE SYSTEM ADJUSTMENTS: Due to both the complex nature of the transmission and the number of special tools required for service, adjust- ments should be entrusted to your dealer. There are a number of simple owner service items which greatly influence the performance of the drive system. 1 . Front and rear tires must be in ...

  • Dixon Zeeter ZTR - page 41

    41 CARE AND MAINTENANCE CAUTION Stop engine, remove key and set parking brake before attempting to adjust the rear chain. REAR CHAIN ADJUSTMENT: Proper tension for the rear chains is accomplished through the use of an adjuster located at mid-point of each rear chain. To adjust, tighten the nut on top of the rubber spring until the chain has approxi ...

  • Dixon Zeeter ZTR - page 42

    42 CARE AND MAINTENANCE ELECTRICAL SYSTEMS: Keep all connections clean and tight. CLEANING THE MOWER: Wash mower periodically. Clean above and below deck. High pressure washing and alkaline based soaps can cause damage to bearings and other parts of the mower. After washing your mower, start the engine and engage the mower deck for a few minutes to ...

  • Dixon Zeeter ZTR - page 43

    43 STANDARD SERVICE PARTS LIST ZEETER MODEL Blades 30 Standard - P/N 2483 (Lo-lift) 30 Hi-Lift - P/N 2484 36 Standard - P/N 1324 (Lo-lift) 36 Hi Lift - P/N 1351 (R) 36 Hi Lift - P/N 1352 (L) 42 Standard - P/N 8688 (Hi-lift) 42 Lo-Lift - P/N 6236 Belts Engine to Transmission - P/N 7650 (all models) 30 Engine to Mower Deck - P ...

  • Dixon Zeeter ZTR - page 44

    44 1 . ENGINE WONT TURN OVER Mower blades engaged- - - - - - - - - - - - - - - - - - - - - -disengage blades Parking brake not on- - - - - - - - - - - - - - - - - - - - -engage parking brake Dead battery- - - - - - - - - - - - - - - - - - - - - - - - - - - - charge or replace Solenoid- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ...

  • Dixon Zeeter ZTR - page 45

    45 TROUBLESHOOTING 6 . ENGINE RUNS BUT MOWER WONT MOVE FORWARD Drive belt broken or slipping- - - - - - - - - - - - - - - - - - - replace drive belt Transmission damage- - - - - - - - - - - - - - - - - - - - - - - - - consult dealer 7 . MOWER LOSES POWER OR TRANSMISSION OVERHEATS Engine air filter-- - - - - - - - - - - - - - - - - - - - - - - - ...

  • Dixon Zeeter ZTR - page 46

    46 NOTES ...

  • Dixon Zeeter ZTR - page 47

    47 OWNER INFORMATION Date Purchased ________________________________ Mower Model Number ____________________________ Mower Serial Number ____________________________ Purchased From ___ _____________________________ Name ________________________________ Address ________________________________ DATE OIL CHANGED: DATE ENGINE TUNED: ___________________ ...

  • Dixon Zeeter ZTR - page 48

    Dixon® and ZTR® and ZEETER® are registered trademarks of Dixon Industries, Inc. DIXON INDUSTRIES, INC. a BLOUNT International Inc. Co. P.O. Box 1569 Coffeyville, Ks 67337-0945 620-251-2000 ZEETER SERIES Part No. 14186-0303 W W W W W ARNING: ARNING: ARNING: ARNING: ARNING: The engine exhaust from this product contains chemicals known to the State ...

メーカー Dixon カテゴリー Lawn Mower

Dixon Zeeter ZTRのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Zeeter ZTRの取扱説明書
- Dixonの製品カード
- パンフレット
- またはDixon Zeeter ZTRの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Dixon Zeeter ZTRの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Dixon Zeeter ZTRの取り付け説明書、サービスマニュアル、簡易説明書、またはDixon Zeeter ZTRのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Dixon Zeeter ZTRの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Dixon Zeeter ZTRデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがDixon Zeeter ZTRを使用するのを助ける技術的文書のことです。説明書は通常、全てのDixon Zeeter ZTRユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Dixonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Dixon Zeeter ZTRの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははDixon Zeeter ZTRの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Dixon Zeeter ZTRに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Dixon Zeeter ZTRデバイスの基本機能を使うにあたってのヒント。 Dixon Zeeter ZTRのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Dixon Zeeter ZTRに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるDixon Zeeter ZTRのメーカー/サービスへの連絡先に関する情報。

Dixon Zeeter ZTRについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもDixon Zeeter ZTRの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDixon Zeeter ZTRで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)