-
HP (Hewlett-Packard) 4000 TN - page 1
Copyright© 1997, 1998 He wlett-Packard Co. Printed in Singapore Manual Part No. C4119-90971 *C4119-90971* *C4119-90971* C41 19-90971 HP LaserJet 4000 T and 4000 TN Printers Getting Started Guide English Printed on Recyc led P aper ...
-
HP (Hewlett-Packard) 4000 TN - page 2
HP LaserJet 4000 T and 4000 TN Pr inters Getting Star ted Guide Pr inter Setup ...
-
HP (Hewlett-Packard) 4000 TN - page 3
Hewlett-P ackard Compan y 11311 Chinden Boule v ard Boise, Idaho 83714 © Cop yright Hewlett-P ackard Company 1997, 1998 All Rights Reser ved. Reproduction, adaptation, or translation without prior written permission is prohibited, e xcept as allowed under the copyright laws . Publication number C4119-90971 First Edition, F ebruar y 1998 W arranty ...
-
HP (Hewlett-Packard) 4000 TN - page 4
EN Getting Star ted Guide 1 Intr oduction Congra tulations on y our purchase of the HP LaserJet pr inter! The printer was packaged with tw o getting star ted guides. Be sure to use the guide that matches your printer model. Configurations This printer is av ailabl e in f our configurations , as described below . HP LaserJet 4000 The HP LaserJet 400 ...
-
HP (Hewlett-Packard) 4000 TN - page 5
2 Getting Star ted Guide EN Installation Chec klist This getting star ted guide will help you set up and install the ne w printer . For proper installation, please complete each section in order . W ARNING! The printer is heavy . We recommend tw o people mov e it. Note T o learn about all the features and capabilities of the printer , see the print ...
-
HP (Hewlett-Packard) 4000 TN - page 6
EN Getting Star ted Guide 3 Step 1. Chec k P ac kage Contents Figure 1 Package Contents Note A printer cable is not included in the package contents . See the printer user’ s guide f or order ing inf or mation. Printer Printer Documentation Control Panel Overlay (This could already be installed on the printer.) Printer Software Toner Cartridge Po ...
-
HP (Hewlett-Packard) 4000 TN - page 7
4 Getting Star ted Guide EN Step 2. Remo ve Internal P ac kaging Note Sav e all packing material. Y ou ma y need to repack the printer at a later date. 1 Remov e the shipping bag and tape from the tra ys. 2 Remov e the tape from the back of the printer . 3 Open the top co v er . 4 Remov e the two pieces of packing material from inside the toner car ...
-
HP (Hewlett-Packard) 4000 TN - page 8
EN Getting Star ted Guide 5 6 Slide T ra ys 2 and 3 out of the pr inter . 7 Remov e all packaging material and tape from the tra ys. 8 Slide T ra ys 2 and 3 back into the printer . ...
-
HP (Hewlett-Packard) 4000 TN - page 9
6 Getting Star ted Guide EN Step 3. Prepare Printer Location Figure 2 Printer Dimensions 15.4 inches (39.0 cm) 16.77 inches (42.6 cm) printer only, rear output bin closed HP LaserJet 4000/4000 N 18.5 inches (46.99 cm) with cover open 13.3 inches (34.3 cm) with cover closed HP LaserJet 4000 T/4000 TN 20.1 inches (51.19 cm) with cover open 15.5 inche ...
-
HP (Hewlett-Packard) 4000 TN - page 10
EN Getting Star ted Guide 7 Location requirements for the printer • A sturdy , lev el surface f o r placement • Space allow a nce around the pr inter • A well v entilated room • No e xposure to direct sunlight or chemicals, including ammonia-based cleaning solutions • Adequate power supply • A stable en vironment—no abrupt temperature ...
-
HP (Hewlett-Packard) 4000 TN - page 11
8 Getting Star ted Guide EN Step 4. Locate Printer P ar ts The f ollowing illustr ations giv e the location and names of the impor tant pr inter par ts. Figure 3 Printer Parts (front view) Top cover Control panel Tray 1 (100-sheet, with extension) Top output bin Additional memory can be installed here. Trays 2 and 3 (each 250-sheet, closed) Tray nu ...
-
HP (Hewlett-Packard) 4000 TN - page 12
EN Getting Star ted Guide 9 Figure 4 Printer Parts (rear view) Rear output bin (straight-through paper path) Power connector Serial and model numbers (inside cover) Serial and accessory interface connectors Parallel interface connector Memory, network, or I/O (More than one can be installed.) ...
-
HP (Hewlett-Packard) 4000 TN - page 13
10 Getting Star ted Guide EN Step 5. Install Accessories Install any accessories that you ha ve purchased with the printer . Use the installation instructions that are packaged with the accessories. Figure 5 Optional Accessories Note See the printer user’ s guide for inf or mation on order ing accessories. HP JetDirect print server EIO card Hard ...
-
HP (Hewlett-Packard) 4000 TN - page 14
EN Getting Star ted Guide 11 Step 6. Install T oner Cartridg e 1 Remov e the toner car tridge from its packaging (sa ve packaging f or possible cartr idge storage). Open the printer by lifting the top cov er . 2 Rotate the car tridge and gently shake it from side to side to distribute the toner e v enly inside the car tr idge. 3 Locate the sealing ...
-
HP (Hewlett-Packard) 4000 TN - page 15
12 Getting Star ted Guide EN Step 7. Load T ra ys T ra ys 2 and 3 T ra ys 2 and 3 are 250-sheet tra ys . F or suppor ted sizes of paper , see the printer user’ s guide. 1 Pull the tra y completely out of the printer . 2 If the tra y is not already set to the desired paper size , snap the left and right guides into place to match the width of the ...
-
HP (Hewlett-Packard) 4000 TN - page 16
EN Getting Star ted Guide 13 Tr a y 1 T ra y 1 is a multi-pur pose tra y that holds up to 100 sheets of paper , 10 env elopes, or 20 inde x cards. T ra y 1 pro vides a conv enient wa y to print env e lopes, tr ansparencies, custom-sized paper , or other type of media without having to unload the other tra ys. Note The printer may pull paper from T ...
-
HP (Hewlett-Packard) 4000 TN - page 17
14 Getting Star ted Guide EN Step 8. Attach P ower Cor d 1 Locate the power s witch on the right side of the printer . Mak e sure the printer is switched off . 2 Connect the pow er cord to the printer and a grounded power strip or an A C outlet. Note Only use the pow er cord that came with the printer . 3 Switch the pr inter on. 4 After the printer ...
-
HP (Hewlett-Packard) 4000 TN - page 18
EN Getting Star ted Guide 15 Step 9. T est the Printer Bef ore connecting the printer to a network or computer , pr int a configuration page to mak e sure the printer is operating correctly . 1 Make sure the printer is on and the READY message is displa y ed. 2 Press [Menu] until the displa y reads INFORMATION MENU . 3 Press [Item] until the displa ...
-
HP (Hewlett-Packard) 4000 TN - page 19
16 Getting Star ted Guide EN Step 10. Connect Printer Cables The HP LaserJet 4000 T printer includes two interf ace por ts: an IEEE-1284 parallel and a RS-232C serial, and an accessor y connector . The HP LaserJet 4000 TN printer also includes an HP JetDirect 600N print ser ver card with an additional three por ts: LocalT alk, Ethernet 10Base-T (RJ ...
-
HP (Hewlett-Packard) 4000 TN - page 20
EN Getting Star ted Guide 17 Connecting P arallel Cable Use the parallel por t when directly connecting the printer to a personal computer . Caution Make sure the printe r is tur ned off bef ore connecting the parallel cab le. Note T o ensure reliability , use an IEEE-1284 compliant parallel cab l e (these cab les are clearly mar ked with “IEEE-1 ...
-
HP (Hewlett-Packard) 4000 TN - page 21
18 Getting Star ted Guide EN Connecting Serial Cable If you are connecting the printer with the serial por t, follo w these instructions. Caution Make sure the printer is turned off bef ore connecting the serial cable . Caution Do not connect a serial cable to the accessor y por t. 1 Connect the serial cable to the serial por t. The cable should in ...
-
HP (Hewlett-Packard) 4000 TN - page 22
EN Getting Star ted Guide 19 Connecting to Apple LocalT alk Netw ork Use the LocalT alk por t to connect to a Apple LocalT alk network. Caution Make sure the printe r is tur ned off bef ore connecting to the LocalT alk por t. 1 Carefully check the orientation of the pins on the LocalT alk cab le with the LocalT alk por t. 2 Connect the cable to the ...
-
HP (Hewlett-Packard) 4000 TN - page 23
20 Getting Star ted Guide EN Connecting to Ethernet 10Base-T Network Use the RJ-45 por t to connect the pr inter to an Ethernet 10-Base-T network. Caution Make sure the printer is turned off before connecting to the RJ-45 por t. • Connect a twisted-pair network cable to the RJ-45 port on the HP JetDirect 600N print server card. • Connect the ot ...
-
HP (Hewlett-Packard) 4000 TN - page 24
EN Getting Star ted Guide 21 Connecting to Ethernet 10Base2 Network Use the BNC por t to connect the pr inter to an Ethernet 10Base2 network. Caution Make sure the printer is turned off before connecting to the BNC por t. • Attach one section of your ThinLAN cable to the BNC “T ” connector. • Attach another ThinLAN cable section or a 50-ohm ...
-
HP (Hewlett-Packard) 4000 TN - page 25
22 Getting Star ted Guide EN Accessory Connector The accessor y connector is used f or adding optional paper handling (e xternal input, output, and paper finishing) devices pro vided by HP- authorized hardware de velopers . F or specific installation instructions, see the documentation provided with these products . Caution Make sure printer is tur ...
-
HP (Hewlett-Packard) 4000 TN - page 26
EN Getting Star ted Guide 23 Step 11. Install Printing Software The printer comes with pr inting software on a compact disc. The printer dr iv ers on this compact disc must be installed to take full advantage of the printer f eatures. If your computer does not ha ve a CD-ROM driv e but y ou ha v e access to one, y ou can cop y the compact disc onto ...
-
HP (Hewlett-Packard) 4000 TN - page 27
24 Getting Star ted Guide EN Installing Windows Printing Software For Windows 95/NT 4.0 1 Close all running applications. 2 Inser t the compact disc into the CD-ROM driv e. (Depending on the computer configuration, the installation progr am ma y automatically star t.) 3 Click Start . 4 Click Run . 5 T ype D:SETUP (or the appropriate dr iv e direct ...
-
HP (Hewlett-Packard) 4000 TN - page 28
EN Getting Star ted Guide 25 Installing Macintosh Printing Software 1 Quit all open applications. 2 Inser t the compact disc into the CD-ROM driv e. 3 Double-clic k the Installer icon and follo w the instructions on the screen. 4 Open the Chooser from the Apple menu. 5 Clic k the Apple LaserWriter icon. If the icon is not there, contact your Macint ...
-
HP (Hewlett-Packard) 4000 TN - page 29
26 Getting Star ted Guide EN Step 12. V erify Printer Setup The easiest wa y to verify that the installation has been completed successfully is to print a document from a software application. 1 Load a software application of y our choice and open or create a simple document. 2 Make sure the correct printer driver is selected. 3 Print the document. ...
-
HP (Hewlett-Packard) 4000 TN - page 30
Copyright© 1997, 1998 He wlett-Packard Co. Printed in Singapore Manual Part No. C4119-90971 *C4119-90971* *C4119-90971* C41 19-90971 HP LaserJet 4000 T and 4000 TN Printers Getting Started Guide English Printed on Recyc led P aper ...
HP (Hewlett-Packard) 4000 TNについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHP (Hewlett-Packard) 4000 TNの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHP (Hewlett-Packard) 4000 TNで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。