Visioneer DP1011の取扱説明書

36ページ 2.29 mb
ダウンロード

ページに移動 of 36

Summary
  • Visioneer DP1011 - page 1

    Xer o x DP1011 user’ s guide ...

  • Visioneer DP1011 - page 2

    Xero x DP1011 pr ojector user’ s guide ...

  • Visioneer DP1011 - page 3

    C opyr i g h t © 2003 Vi s i oneer , I nc. Reproduction, adaptation, or translation without pri or written permission is proh ibited, except as allowed un der the copyright laws. Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the Un ited St ates and/or other countrie s and are used under license. All other Xe rox prod ...

  • Visioneer DP1011 - page 4

    FCC Radio Frequency Interference S t atement This equipment has b een tested and found to comply with the limit s for the class B digit al device, pursuant to p art 15 of the FCC Rules. These limi t s are designed to provide rea sonable protection against interference in a residential inst allation. This equipment generates, uses and can radiate ra ...

  • Visioneer DP1011 - page 5

    Xerox DP1011 User’s Guide iv T able of Content s Welcome Precautions Do’s and Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Visioneer DP1011 - page 6

    Xerox DP1011 User’s Guide 1 We l c o m e Y our new Xe rox DP101 1 projector is an XGA single chip 0.7” DLP™ (Digital Light Processing) projector with these outstand ing features: • T rue XGA, 1024 x 768 addressable pixels • 2.1 lbs (0.95 kgs) compact d esign • Single chip DLP™ te chnology • Compatible with NTSC, NTSC4.43, P AL, P AL ...

  • Visioneer DP1011 - page 7

    Xerox DP1011 User’s Guide 2 Precautions Precautions Follow all warnings, precaut ions and mainten ance as recommended in this user’s guide to avoid injury and to maximize the life of your projector . W arning— Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. W arning— T o reduce the risk of f ...

  • Visioneer DP1011 - page 8

    Xerox DP1011 User’s Guide 3 Precautions Do’ s and Don’t s Do: • T urn of f the projector before cleaning. • Use a sof t cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the projector is not being used for a long period of time. Don’t: • Block the ventilation slot s and o ...

  • Visioneer DP1011 - page 9

    Xerox DP1011 User’s Guide 4 Precautions What’ s in the Box Before proceeding, check the contents of th e box. If items are missing or damaged, cont act the dealer where you purchased the projector . Projector with lens cap Power Cord Quick Start Card Carrying Case Remote Control Battery VGA Cable Tech Support Card Composite Video Cable S-Video ...

  • Visioneer DP1011 - page 10

    Xerox DP1011 User’s Guide 5 Precautions The Xerox DP101 1 Projector Focus Ring —Rot ate to focus the image. Zoom Ring —Rotate to zoom the imag e in or out. Elevator Button —Press to release the elevator foot to lower or raise the projector . Zoom Lens —Extends and retract s as you rotate the zoom ring to zoom in/out. Remote Control Receiv ...

  • Visioneer DP1011 - page 11

    Xerox DP1011 User’s Guide 6 Precautions Connection Port s Power Connector —Plug the powe r cord into the projector here. VGA Connector —Use the VGA cable that you received with you r projector to plug in a computer , HDTV , or component video source. Composite Vide o Input Connector —Plug in your composite video source here, such as a DVD p ...

  • Visioneer DP1011 - page 12

    Xerox DP1011 User’s Guide 7 Installation Inst allation Connecting the Projector 1. Make sure the projector and computer are turned of f. 2. Connect one end of the VGA ca ble to the projector . Connect the other end to the VGA port on t he computer . 3. Connect the projector to the other vide o source(s) with the appropriate cable(s). 4. Plug the ...

  • Visioneer DP1011 - page 13

    Xerox DP1011 User’s Guide 8 Installation Powering On/Off the Projector T o turn on the projector power 1. Remove the lens cap. 2. Make sure that the power cord and the cables from the video sources are securely connected to the pro jector . 3. T urn on the lamp by pressing the Power button on the control panel or on the Remote Contr ol. The start ...

  • Visioneer DP1011 - page 14

    Xerox DP1011 User’s Guide 9 Installation T o turn off the projector power 1. Press the Power button on the p rojector or Remote Control to turn off t he projector lamp. An on-screen message appears: Power off the lamp? 2. Press the Power button again to confirm. If you don’t press the button again within five seconds, the message disappears and ...

  • Visioneer DP1011 - page 15

    Xerox DP1011 User’s Guide 10 Installation Adjusting the Projected Image T o raise the projector 1. Lift the projector up an d press the elevator button. The elevator foot pop s out. 2. Press the elevator button and hold it in while ra ising the projector to the display angle you want, then release the elevator button to lock the elevator foot in ...

  • Visioneer DP1011 - page 16

    Xerox DP1011 User’s Guide 11 Installation Adjusting the Projector Zoom/Focus Y ou adjust the focus and zoom in / out with the focus ring and zoom ring on the lens housing. T o focus the image, rot ate the focus ring until the image is clear . The projector can focus at distances from 3.94 feet to 32.81 feet (1.2m to 10.0m). Adjusting Proje ction ...

  • Visioneer DP1011 - page 17

    Xerox DP1011 User’s Guide 12 User Controls User Controls Panel Control and Remote Control The buttons on the Panel Contro l and the Remote Control are for controlling the projector ’s functions. Panel Control Power/St andby Indicator —Flashes green during power startup ; remains steady green wh en projector is ready . W arning Indicator —T ...

  • Visioneer DP1011 - page 18

    Xerox DP1011 User’s Guide 13 User Controls Remote Control T ransmit Indicator Light —Indicates the in frared signal that is transmitted to, and received by t he projector . PiP —Displays the Pip menu of the On-Screen Display (OSD). Source —Selects type of video source: RGB, Compone nt-p, Component-i, S-Vi deo, Composite Video, or HDT V . Po ...

  • Visioneer DP1011 - page 19

    Xerox DP1011 User’s Guide 14 User Controls On-Screen Display (OSD) Menus The On-Screen Display (OSD) menus provide th e options to make image adjustment s and change a variety of settings. The projecto r automatically detects the video source so your selections from the menus will apply to that source. Displaying Menus and Selecting Items 1. T o ...

  • Visioneer DP1011 - page 20

    Xerox DP1011 User’s Guide 15 User Controls Choose a Language 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Language menu and pre ss the Enter button. The Language menu appears. 3. Use the keys to select the la nguage you want. The Panel Control only has a key . Use it to select from the menu. 4. Pr ...

  • Visioneer DP1011 - page 21

    Xerox DP1011 User’s Guide 16 User Controls Adjust the Projector Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the All Images menu a nd press the Enter button. The All Images menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting. 4. When the new ...

  • Visioneer DP1011 - page 22

    Xerox DP1011 User’s Guide 17 User Controls Adjust the Computer Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Computer Image menu and pre ss the Enter button. The Computer Image menu ap pears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting. 4. When ...

  • Visioneer DP1011 - page 23

    Xerox DP1011 User’s Guide 18 User Controls Adjust the V ideo Image 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the V ideo Image menu and press the Enter button. The Vide o Image menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting. 4. When the new ...

  • Visioneer DP1011 - page 24

    Xerox DP1011 User’s Guide 19 User Controls Projector Management 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the Management menu and pre ss the Enter button. The Management menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting. 4. When the new setti ...

  • Visioneer DP1011 - page 25

    Xerox DP1011 User’s Guide 20 User Controls Adjust the PiP (Picture in Picture) 1. Press the Menu button on the Remote Control or Panel Control to open the OSD. 2. Select the PiP menu and press the Enter button. The PiP menu appears. 3. Use the keys to select the item you want, and use the keys to adjust the selected setting. 4. When the new setti ...

  • Visioneer DP1011 - page 26

    Xerox DP1011 User’s Guide 21 Maintenance Maintenance Changing the Lamp The projector ’s lamp life is approximate ly 1500 hours of use. The projector automatically monitors the la mp life. After 1500 hours o f use, the projector displays the message: The Lamp has been in use for over 1500 hours. Y ou should purchase a sp are bulb. When you see t ...

  • Visioneer DP1011 - page 27

    Xerox DP1011 User’s Guide 22 Maintenance 4. Remove the cover . 5. Remove the two screws from the lamp module. 6. Lift up the handle and pull out the lamp module. 7. T o replace the lamp module, reverse the previous step s. Lamp Module ...

  • Visioneer DP1011 - page 28

    Xerox DP1011 User’s Guide 23 Maintenance T roubleshooting If you try the troubleshooting proc edures described in this section and the problem persist s, you may have a malfunctioning projector . Refer to the technical su pport card that you received with your projector or contact t he retailer where you purch ased your projector . Also visit our ...

  • Visioneer DP1011 - page 29

    Xerox DP1011 User’s Guide 24 Maintenance For Windows 95, 98, 2000, XP: 1. From the Windows S tart menu, select Settings/Control Panel and then double-click the Display icon. 2. Select the Setting t ab. The Desktop Area shows the resolution setting. 3. V erify that the resolution setting is 1024 x 768 o r less. If the projector is still not projec ...

  • Visioneer DP1011 - page 30

    Xerox DP1011 User’s Guide 25 Maintenance Problem: The image is flicke ring or otherwise unst able T ry one of these possible solutions: • On the On-screen display , go to the Computer Mode p age and select T racking. Change the tracking until the image stabilizes. • Change the color setting of your comp uter monitor . Change the number of col ...

  • Visioneer DP1011 - page 31

    Xerox DP1011 User’s Guide 26 Maintenance Problem: Image is reversed. On the On-screen display , go to the Computer/Video Mode/ Management p age and select Projection Direction. Change the direction of projection to display the image properly . Problem: Lamp burns ou t or make a popping sound. When the lamp reaches it s end of life, it will burn o ...

  • Visioneer DP1011 - page 32

    Xerox DP1011 User’s Guide 27 Maintenance Xerox DP101 1 Projector Specifications Lamp V alve Single Chip DLP™ (Digital Ligh t Processing) T echnology Lamp 120W user-replaceable P_VIP lamp Number of Pixels 1024 pixels (horizontal) by 768 lines (ve rtical) Displayable Colors 16.7 million colors Projection Lens f/2.8~3.1 f=25.8~30.0mm with 1.16x ma ...

  • Visioneer DP1011 - page 33

    Xerox DP1011 User’s Guide 28 Maintenance Setting the Screen Resolution For best viewing on your computer screen, it s resolution should be set to 1024 x 768 or less. T o reset the scree n resolution, follow the steps below , referring to the chart on page 29 for the correct settings for your type of co mputer and monitor . If you have a Windows P ...

  • Visioneer DP1011 - page 34

    Xerox DP1011 User’s Guide 29 Maintenance Comp atibility Modes—Windows Computers * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA VGA 64 ...

  • Visioneer DP1011 - page 35

    Xerox DP1011 User’s Guide 30 Maintenance Comp atibility Modes—Macintosh Compu ters * Compression computer image. Mode Resolution (Analog) V . Frequen cy (Hz) H. Frequency (Hz) MAC 16”* 832 x 624 74.55 49.725 MAC 19”* 1024 x 768 75 60.24 MAC* 1 152 x 670 75.06 68.68 MAC G4 640 x 480 60 31.35 MAC G4 640 x 480 120 68.03 MAC G4 1024 x 768 120 9 ...

  • Visioneer DP1011 - page 36

    05-0600-000 ...

メーカー Visioneer カテゴリー Projector

Visioneer DP1011のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DP1011の取扱説明書
- Visioneerの製品カード
- パンフレット
- またはVisioneer DP1011の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Visioneer DP1011の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Visioneer DP1011の取り付け説明書、サービスマニュアル、簡易説明書、またはVisioneer DP1011のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Visioneer DP1011の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Visioneer DP1011デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがVisioneer DP1011を使用するのを助ける技術的文書のことです。説明書は通常、全てのVisioneer DP1011ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Visioneerの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Visioneer DP1011の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははVisioneer DP1011の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Visioneer DP1011に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Visioneer DP1011デバイスの基本機能を使うにあたってのヒント。 Visioneer DP1011のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Visioneer DP1011に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるVisioneer DP1011のメーカー/サービスへの連絡先に関する情報。

Visioneer DP1011についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもVisioneer DP1011の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがVisioneer DP1011で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)