-
NEC LA-1422JMW - page 1
MultiSync ® LCD 400V ™ User’s Manual Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8 Features 9 Troubleshooting 10 References 11 Limited Warranty 12 MultiSync ® LCD 400V ™ User’s Manual 78133331 9/25/98, 12:46 PM 1 ...
-
NEC LA-1422JMW - page 2
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARN ...
-
NEC LA-1422JMW - page 3
MultiSync LCD 400V Contents 1 Your new NEC Technologies MultiSync ® LCD monitor box* should contain the following: • MultiSync LCD 400V ™ monitor, LA-1422JMW, with tilt/swivel base • Power Cord • Video Signal Cable • User’s Manual • Registration Card * Remember to save your original box and packing material to transport or ship the m ...
-
NEC LA-1422JMW - page 4
Quick Star t To attach the MultiSync ® LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1) . Tighten all screws. For the Mac: Connect the MultiSync LCD 400V ™ Mac ...
-
NEC LA-1422JMW - page 5
Quick Star t 3 Figure E.1 Figure C.1 Figure D.1 Power Switch 78133331 9/25/98, 12:46 PM 5 ...
-
NEC LA-1422JMW - page 6
4 OSM ™ (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: Control Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM controls main menu. CONTROL / Moves the highlighted Moves the highlighted area area up/down to select up/down to select one of the one of the controls. controls. CONTROL ? ...
-
NEC LA-1422JMW - page 7
5 Controls AccuColor ™ Control System Color presets select the desired color setting. If a setting is adjusted, the name of the setting will change to Custom . Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or de ...
-
NEC LA-1422JMW - page 8
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service ...
-
NEC LA-1422JMW - page 9
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downwar ...
-
NEC LA-1422JMW - page 10
Specifications 8 Monitor MultiSync ® LCD 400V ™ Notes Specifications Monitor LCD Module Diagonal: 14.1 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 14.1 inch liquid crystal display (LCD); 0.28 mm dot Native Resolution (Pixel Count): 1024 x 768 pitch; 200cd/m 2 white luminence; 150:1 contrast ratio, typical Input Signal Vid ...
-
NEC LA-1422JMW - page 11
9 Features Analog Advantage: Capable of displaying unlimited colors in a continuous spectrum, providing a truer representation of color. The monitor’s high contrast LCD enhances color vibrancy and improves focus with no geometric distortion. Wider Compatibility: Because the MultiSync LCD monitor is analog through and through, it does not require ...
-
NEC LA-1422JMW - page 12
T roubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. ...
-
NEC LA-1422JMW - page 13
11 References • BBS (508) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (508) 635-4298 • Electronic Ch ...
-
NEC LA-1422JMW - page 14
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit, other than the LCD backlight, which proves defective for a period of three (3) years from the date of first consumer ...
-
NEC LA-1422JMW - page 15
Part No. 78133331 Printed in Japan NEC LCD Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, includi ...
NEC LA-1422JMWについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもNEC LA-1422JMWの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC LA-1422JMWで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。