Mitel 3300の取扱説明書

22ページ 0.44 mb
ダウンロード

ページに移動 of 22

Summary
  • Mitel 3300 - page 1

    7/4/2004 Page 1 of 22 Mitel PBX interface with Conferencing Server Configuration Notes Note: This document section is maintained by Mitel Networks When referring to any information in this document please also check the Additions & Correction section on the last page for up dates. File: Mitel 3300 PBX interface with Conferencing Server V002 ...

  • Mitel 3300 - page 2

    7/4/2004 Page 2 of 22 Mitel PBX interface with Conferencing Server Configuration Notes Mitel PBX interface with Confere ncing Server Configuration Notes ........................ 1 Introduction ................................................................................................ .................... 3 3300ICP with ISDN or SX2000 with ISDN ...

  • Mitel 3300 - page 3

    7/4/2004 Page 3 of 22 Introduction This document describes the configuration of Mitel Networks PBX’s to correctly interface to the Interactive Group Communication System by VCon. For more information on the configuration o f the IGC, please refer to Mitel 3300 - RemoteAbility IGC Integration Specifications V1 . Note that all PBX configuration sho ...

  • Mitel 3300 - page 4

    7/4/2004 Page 4 of 22 ANI/DNIS/ISDN Number Delivery Yes Link Descriptor Assignment Number: 4 Address for Message Control: A BER - Maintenance Limit, 10** - n: 4 BER - Service Limit, 10** - n: 3 Data Call Alternate Digit Inversion: Yes Framing Losses in 24 hrs - Maintenance Limit: 255 Framing Losses in 24 hrs - Service Limit: 9000 Integrated Digital ...

  • Mitel 3300 - page 5

    7/4/2004 Page 5 of 22 MSDN - DPNSS - DASSII Trunk Circuit Descriptor Number Card Type Dual Seizure Priority Far End Connection Signalling Protocol 4 UNIVERSAL T1 Incoming Local Office MSDN - DPNSS Trunk Service Assignment Trunk Service Number: 4 Release Link Trunk: No Class of Service: 4 Class of Restriction: 1 Baud Rate: 300 Intercept Number: 1 No ...

  • Mitel 3300 - page 6

    7/4/2004 Page 6 of 22 • Attach VCon IGC server T1 link to NSU, DSU or Embedded PRI card o Configure hardware for Line Termination through jumpers or D IP switch – please refer to the Technician’s Handbook of the correct product (3300 or SX2000) • connect to server with a straight through cable • Program trunks o for example, please see Ex ...

  • Mitel 3300 - page 7

    7/4/2004 Page 7 of 22 ANI/DNIS/ISDN Number Delivery Yes Link Descriptor Assignment Number: 4 Address for Message Control: BER - Maintenance Limit, 10** - n: 4 BER - Service Limit, 10** - n: 3 Data Call Alternat e Digit Inversion: Yes Framing Losses in 24 hrs - Maintenance Limit: 255 Framing Losses in 24 hrs - Service Limit: 9000 Integrated Digital ...

  • Mitel 3300 - page 8

    7/4/2004 Page 8 of 22 Digital E and M Trunk Circuit Descriptor Assignment Number: 4 Call Collision Han dling: AT&T AT&T Call Collision Handling: Backoff Ignore Far End Disconnect: No Release Acknowledge Timer: 80 Address Signalling: DTMF Disconnect Timer: 300 Incoming Start Type: Wink Dial Tone on Incoming Seize: No Outpulse Delay Timer: 80 ...

  • Mitel 3300 - page 9

    7/4/2004 Page 9 of 22 D igital Trunk Assignment Cabinet: 6 Shelf: 1 Slot: 1 Circuit: 1 Card Type: UNIVERSAL T1 Trunk Number: 6101 Trunk Service Number: 4 DTS Service Number: Circuit Descriptor Number: 4 Interconnect Number: 1 Example of ARS Programming on 3300 ICP/SX2000 Create Trunk Group Trunk Group Assignment Trunk Group Number Hunt Mode Trunk G ...

  • Mitel 3300 - page 10

    7/4/2004 Page 10 of 22 2 6102 3 6103 4 6104 5 6105 6 6106 7 6107 8 6108 9 6109 10 6110 ...

  • Mitel 3300 - page 11

    7/4/2004 Page 11 of 22 Create Digit Modification Assignment - in this example, we are using Digit Modification number 4 , and there are no digits to absorb or to insert Digit Modification Assignment Digit Modification Number Number of Digits to Absorb Digits to be Inserted Final Tone Plan/Information Marker 1 3 2 0 3 1 <T01> 4 0 5 0 Create Ro ...

  • Mitel 3300 - page 12

    7/4/2004 Page 12 of 22 SX200 with ISDN • Attach VCon IGC server to PRI card with straight through cable o Configure hardware for Line Termination. Please refer to SX200 Technician ’s Handbook for more information. • Program t r unks o P lease see Example of T1 PRI Programming on SX200 • Use IMAT to configure PRI card for DMS250, user side ? ...

  • Mitel 3300 - page 13

    7/4/2004 Page 13 of 22 Example of T1 PRI Programming on SX200 Refer to SX200 EL/ML Technicians Handbook , Programming a PRI, for System Configuration, Class of Service Options and System Options/System Timers. Form 13 Assign T1 E&M circuit descriptor to the ISDN trunk. ...

  • Mitel 3300 - page 14

    7/4/2004 Page 14 of 22 ...

  • Mitel 3300 - page 15

    7/4/2004 Page 15 of 22 ...

  • Mitel 3300 - page 16

    7/4/2004 Page 16 of 22 Define the incoming ISDN trunk as a Dial In trunk in form 15 ...

  • Mitel 3300 - page 17

    7/4/2004 Page 17 of 22 Assign the ISDN trunks to a trunk group in Form 16 ...

  • Mitel 3300 - page 18

    7/4/2004 Page 18 of 22 Select a T1 Link Descriptor for the ISDN trunks in form 42 ...

  • Mitel 3300 - page 19

    7/4/2004 Page 19 of 22 ...

  • Mitel 3300 - page 20

    7/4/2004 Page 20 of 22 Assign the ISDN link descriptor to slot 6 a nd/or slot 8 on the PRI card bay, Form 43 Form 44, Network Sync - To be determined by qualified Technician SX200 with T1/D4 • Attach VCon IGC server to SX200 with cross over cable. • Program trunks for T1/D4 . All values are default. • Program ARS so th at a single four digit ...

  • Mitel 3300 - page 21

    7/4/2004 Page 21 of 22 T1 Crossover cable wiring Specifications [RJ45 Connector] Supplied with RemoteAbility system. Connector A Pin Connector B Pin 1 4 2 5 4 1 5 2 ...

  • Mitel 3300 - page 22

    7/4/2004 Page 22 of 22 Addition & Corrections The change I had to make was with the ANI/DNIS insertion in digit mod with T1/D4 trunks : The doc says above to insert **6135922122** The correct format for this string is : *ANI*DNIS* We used this at for fixed ANI at Pyramid: *3125551212*7900* For caller's ANI: *<E>*7900* ...

メーカー Mitel カテゴリー Stereo Amplifier

Mitel 3300のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 3300の取扱説明書
- Mitelの製品カード
- パンフレット
- またはMitel 3300の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitel 3300の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitel 3300の取り付け説明書、サービスマニュアル、簡易説明書、またはMitel 3300のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitel 3300の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitel 3300デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitel 3300を使用するのを助ける技術的文書のことです。説明書は通常、全てのMitel 3300ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitelの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitel 3300の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitel 3300の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitel 3300に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitel 3300デバイスの基本機能を使うにあたってのヒント。 Mitel 3300のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitel 3300に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitel 3300のメーカー/サービスへの連絡先に関する情報。

Mitel 3300についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitel 3300の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitel 3300で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)