-
SIIG 04-0568A - page 1
1 A/V PowerSaver 8 Quick Installation Guide 04-0568A Introducing the A/V PowerSaver 8 The A/V PowerSaver 8 surge protector provides a great energy conservation solution that utilizes the Master- Power-Save control concept. Features and Benefits • 8 protected outlets (1 master, 5 “Power Save”, 2 always-on) • “Green” energy-saving feature ...
-
SIIG 04-0568A - page 2
2 Layout Power Cord Resettable Circuit Breaker Surge Protection LED Grounding LED Master Outlet (1) with LED Power Save Outlets (5) with LED Always On Outlets (2) with LED Network (RJ45) Jacks Auto /Manual Switch Phone (RJ11) Jacks DSS/Coax Connector for Surge Protection Figure 1: Layout • Power Cord : Long 6 foot heavy-duty power cord with low-p ...
-
SIIG 04-0568A - page 3
3 • Master Outlet (1) with LED: Main outlet – controls the “ON/OFF” status of the “POWER SAVER” outlets • Power Save Outlets (5) with LED : Power saving outlets- power automatically turns ON/OFF according to Master Outlet’s device status. • Always On Outlets (2) with LED : Continuously powered for devices needing constant power ? ...
-
SIIG 04-0568A - page 4
4 Using Power Save Feature To enable the Power Save feature, select the AUTO setting on the AUTO/Manual switch. Note: The MANUAL setting will convert all outlets to “Always On” functionality. Plug your TV, computer, or other “MASTER” device into the “MASTER” outlet and plug peripherals (DVD player, A/V receiver, CD player, printer, etc. ...
-
SIIG 04-0568A - page 5
5 5-year Limited Warranty and Connected Equipment Guarantee In purchasing a SIIG A/V PowerSaver8 surge protector in the United States or Canada, the original end user receives a Limited Warranty and Connected Equipment Guarantee from SIIG, Inc. (for ease of reading, referred to as “SIIG”). The Limited Warranty and the Connected Equipment Guaran ...
-
SIIG 04-0568A - page 6
6 Equipment Guarantee or the State or Province may impose additional obligations, or additional “implied warranties.” To the extent necessary to comply with those laws, the terms of the Limited Warranty and the Connected Equipment Guarantee should be read to adjust to those requirements only to the extent necessary to comply with such local law ...
-
SIIG 04-0568A - page 7
7 IMPLIED WARRANTY OF MERCHANTABILITY ORFOR FITNESS FOR A PARTICULAR PURPOSE, IF APPLICABLE TO THE PRODUCT, IS LIMITED IN DURATION TO THE PERIOD OF OWNERSHIP BY THE INITIAL CUSTOMER. THIS PROVISION SHALL NOT CREATE ANY IMPLIED WARRANTY OR MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE THAT WOULD NOT OTHERWISE APPLY TO THE PRODUCT. NOTE: SOM ...
-
SIIG 04-0568A - page 8
8 Initial Customer (the original end-user consumer purchaser) of the Product. 2. A) If it is within the store's return policy period, please return the product to the store where you purchased from. B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced. Step 1: ...
-
SIIG 04-0568A - page 9
9 SIIG will inspect and examine the Product within ten (10) days of receipt. If the Product is not as warranted, SIIG will repair or replace the Product and return it to you at SIIG’s expense, or, if SIIG is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, SIIG will refund to you the full purchase ...
-
SIIG 04-0568A - page 10
10 The Limited Warranty does not cover Connected Equipment, but as is explained below, to be covered under the Connected Equipment Guarantee, the Connected Equipment must have been damaged due only to a direct failure of the Product. The Connected Equipment must have been damaged due to only a defect in materials or workmanship of the Product. In t ...
-
SIIG 04-0568A - page 11
11 Making a Connected Equipment Guarantee Claim. To make a Warranty claim for damage to Connected Equipment under the Connected Equipment Guarantee, you must do the following: 1. Complete and return the SIIG Warranty card or provide reasonable proof of purchase, for example, a sales receipt that establishes you as the original end-user consumer pur ...
-
SIIG 04-0568A - page 12
12 SIIG’s Duties. SIIG will inspect and examine the Product and the item(s) of Connected Equipment (or at SIIG’s election, your written statement and repair cost estimate for those item(s)). You must return the product for inspection. If the damage to Connected Equipment is covered by the Connected Equipment Guarantee, SIIG will (in addition to ...
-
SIIG 04-0568A - page 13
13 such equipment so that SIIG’s maximum liability shall be reduced to reflect all such other payments or sources of recovery. If SIIG replaces the connected equipment or pays to the Initial Customer the Agreed Damage Amount, the Initial Customer shall transfer ownership of all item(s) to SIIG without warranty by the Initial Customer, but free of ...
-
SIIG 04-0568A - page 14
14 Guarantee to Connected Equipment (and only up to the applicable aggregate ceiling amount). 3. The Connected Equipment Guarantee does not cover damage to Connected Equipment or apply if the Product has been operated in a failure mode or not in compliance with SIIG operating instructions and manuals, or if the Connected Equipment has been operated ...
-
SIIG 04-0568A - page 15
15 SIIG Does Not Cover or Undertake Any Liability in Any Event for Any of the Following: 1. Loss of or damage to all electronic data, records, software applications or software programs or the restoration of electronic data, records, or the reinstallation of any software. 2. Damage from causes other than AC Power Line Transients, spikes, or surges ...
-
SIIG 04-0568A - page 16
16 WHETHER FOR DAMAGE TO OR LOSS OF PROPERTY [EXCEPT FOR (AND ONLY FOR) THE SPECIFIC LIMITED AGREEMENT OF SIIG TO PROVIDE CERTAIN WARRANTY BENEFITS REGARDING “CONNECTED EQUIPMENT” UNDER THE “SIIG CONNECTED EQUIPMENT GUARANTEE”], LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION OR DATA. NOTE: SOME STATES OR PROVINCES DO NOT ALL ...
-
SIIG 04-0568A - page 17
17 ANY SUCH USE IS IMPROPER AND IS A MISUSE OF THE SIIG PRODUCT . The Limited Warranty and the Connected Equipment Guarantee are governed by the laws of the United States and the State of California, without reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of Goods is ...
-
SIIG 04-0568A - page 18
18 Blank Page ...
-
SIIG 04-0568A - page 19
19 Blank Page ...
-
SIIG 04-0568A - page 20
A/V PowerSaver 8 is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other names used in this publication are for identification only and may be trademarks ...
SIIG 04-0568Aについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSIIG 04-0568Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSIIG 04-0568Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。