ページに移動 of 56
User’ s Man ual MultiSync X841UHD MultiSync X981UHD ...
Inde x DECLARA TION OF CONFORMITY ............................................................................................................. English-1 Important Information ................................................................................................................................... English-2 W ARNING ....................... ...
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U .S. Responsible P arty: NEC Dis ...
English-2 Impor tant Inf ormation TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING T ...
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONIT OR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel. • Do no ...
English-4 Contents Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • V ideo Signal Cable (DisplayPort cable) • V ideo Signal Cable (Mini DisplayPort to DisplayPort cable) • Wireless Remote Control and AAA Batteries • Setup Manual • Clamp x 1 • Screw with washer (M4 x 10) x 1 • CD-ROM Po ...
English-5 English This de vice cannot be used or installed without the T ab letop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized ser vice person. Failure to f ollow NEC standard mounting procedures could result in damage to the equipment or injur y to the user or ...
English-6 Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. 1. Attach e yebolts (not included) f or mounting This model is equipped with attachable eyebolts to aid in mounting. • Screw the eyebolts into eyebolt holes as shown in the picture. • Be sure eyebolts are secure. • In order to move the moni ...
English-7 English When using mounting accessories other than NEC compliant and approved, they must comply with the VESA-compatible mounting method. NO TE: Prior to installation, be sure to place the monitor on a fl at area with adequate space. 3. Using Option Board 1. T urn off the main power switch. 2. Remove the attached slot cover by unscrewing ...
English-8 P ar ts Name and Functions Contr ol Panel 쐃 PO WER button ( ) Switches the power on/off. See also page 16. 쐇 MUTE button (MUTE) Switches the audio mute ON/OFF . 쐋 INPUT button (INPUT) Acts as SET/POINT ZOOM button within OSD menu. (T oggle switches between [DVI1], [DVI2], [DPORT], [HDMI1], [HDMI2], [HDMI3], [HDMI4], [OPTION]*). Thes ...
English-9 English T erminal Panel 쐃 Main P ower Switch On/Off switch to turn main power ON/OFF . 쐇 A C IN connector Connects with the supplied power cord. 쐋 Service por t This USB slot is for future software upgrades. 쐏 LAN port (RJ-45) LAN connection. See page 34 and 37. NO TE: Please give priority for use to LAN1. 쐄 REMO TE IN Use the o ...
English-10 Wireless Remote Contr ol 쐃 PO WER button Switches the power on/standby . 쐇 INPUT button Selects input signal. HDMI1: HDMI1 HDMI2: HDMI2 HDMI3: HDMI3 HDMI4: HDMI4 DVI1: DVI1 DVI2: DVI2 DisplayPort: DPORT OPTION: OPTION* 2 쐋 MUL TI INPUT button Selects input signal. See page 29. PRESET1: PRESET1* 3 PRESET2: PRESET2* 3 . 쐏 OPTION ME ...
English-11 English Operating Range for the Remote Contr ol Points the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Uses the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.5 m (10 ft.). ...
English-12 1. Determine the installation location CA UTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information. CA UTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY FOUR OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CA UTION: Do no ...
English-13 English 5. Switch on the po wer of all the attached external equipment When connected with a computer , switch on the power of the computer fi rst. 6. Operate the attached e xternal equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See pages 23 an ...
English-14 Connections NO TE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NO TE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of ...
English-15 English Connecting a P ersonal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically . <T ypical factory preset signal tim ...
English-16 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NO TE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button. Main Power Switch OFF ON Power Button Using the remot ...
English-17 English Aspect DVI1, DVI2, DPORT , OPTION* 4 , PRESET1* 5 , PRESET2* 5 FULL 1:1 ZOOM NORMAL HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* 5 , PRESET2* 5 FULL WIDE DYNAMIC 1:1 ZOOM NORMAL *4: This function depends on which option board you use. *5: This function depends on INPUT CONFIGURA TION setting. Aspect ratio of image Unchanged view* 3 Recom ...
English-18 INPUT CONFIGURA TION Y ou can display 3840 x 2160 60 Hz image by using multiple input signals. Selects input sources. Depending on the setting at HDMI/DVI SELECT , the selection of INPUT CONFIGURA TION is changed. HDMI/DVI SELECT INPUT CONFIGURA TION HDMI OFF HDMIx4 (PRESET1) HDMIx2 (PRESET1) HDMIx2 (PRESET2) HDMI/DVI OFF HDMIx2 (PRESET1 ...
English-19 English Picture Mode Depending on the setting at SPECTRA VIEW ENGINE (see page 31), selection of Picture mode is changed. SPECTRA VIEW ENGINE is “ON”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. Selecting Picture mode with wireless remote control By pressing Pi ...
English-20 GAMMA Allows you to manually select the brightness level of grayscale. There are fi ve selections: sRGB, L ST AR, DICOM SIM. and CST . We recommend to show grayscale image data on screen. sRGB: GAMMA setting for sRGB. L ST AR: GAMMA setting for Lab color space. DICOM SIM.: DICOM GSDF (Grayscale Standard Display Function) is typically us ...
English-21 English SPECTRA VIEW ENGINE is “OFF”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. DVI1, DVI2, DPORT , OPTION*, PRESET1* 1 , PRESET2* 1 ST ANDARD sRGB CUSTOM1 CUSTOM2 HIGHBRIGHT HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* 1 , PRESET2* 1 ST ANDARD CINEMA CUSTOM1 CUSTOM2 ...
English-22 OSD (On-Screen-Displa y) Contr ols NO TE: Some functions may not be available depending on the model or optional equipment. PICTURE MODE Goto Adjustment S ele c t Return Clos e 70 50 50 50 50 50 THANK YOU FOR SA VING THE ENVIRONMENT . CARBON FOOTPRINT 86.0 % Input source Main Menu Icons Main Menu Item Sub Menu Key Guide Adjustment Settin ...
English-23 English Setting Default PICTURE BACKLIGHT* 1 Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. 70 CONTRAST* 1 Adjusts the image brightness in relationship to the input signal. Press + or - to adjust. NOTE: When sRGB is ...
English-24 ZOOM The image can be expanded/reduced. NOTE: The expanded image which is outside of active display area is not shown. The reduced image may have some image degradation. - ZOOM Maintains the aspect ratio while zooming. - HZOOM Amount of horizontal zoom. VZOOM Amount of vertical zoom. H POS Horizontal position. V POS V ertical position. I ...
English-25 English SCHEDULE LIST List of schedules. - DA TE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the “SCHEDULE” function to operate. See page 32. YEAR Confi gures the year for the real-time clock. - MONTH Confi gures the month for the real-time clock. - DA Y Confi gures the day ...
English-26 TEXT TICKER OFF MODE Enables T ext Ticker and allows you to set Horizontal or V ertical direction. POSITION Selects the location of the T ext T icker on the screen. SIZE Determines the size of the T ext T icker in relationship to the overall screen size. DETECT Enables auto-detection of the T ext T icker . PICTURE1 Selects input signals. ...
English-27 English MUL TI DISPLA Y ID CONTROL Sets the monitor ID number from 1-100 and group ID from A-J. DETECTED MONITORS shows the number of all monitors which follow in the chain with LAN. NOTE: Group ID is made of multiple selections. 1 AUTO ID When “YES” is selected, monitor ID numbers are set automatically in all monitors which follow i ...
English-28 HEA T ST A TUS Displays status of the F AN, BACKLIGHT and TEMPERA TURE. - F AN CONTROL Cooling fan reduces the temperature of the display to protect from overheating. If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed. AUTO, HIGH SCREEN SA VER Use the SCREEN SA VER function to reduce the risk ...
English-29 English AD V ANCED OPTION1 INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are connected. NOTE: When SUPER is selected in INPUT CHANGE, this function cannot be changed. NONE NONE The Monitor will not search the other video input ports. FIRST DETECT Corresponding option only* 1 When the ...
English-30 DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. NOTE: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu. ON ON Converts interlaced signals to progressive. This is the default setting. OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image r ...
English-31 English AD V ANCED OPTION2 AUTO DIMMING* Adjusts the backlight of the LCD automatically depending on the amount of ambient light. - AUTO BRIGHTNESS DVI1, DVI2, DPORT , OPTION* 1 , PRESET* 2 , PRESET2* 2 inputs only . Adjusts the brightness level according to the input signal. NOTE: Do not select this function when ROOM LIGHT SENSING is M ...
English-32 NO TE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press the SET/POINT ZOOM or the + button to enter the ...
English-33 English REMO TE CONTROL ID FUNCTION REMO TE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there a ...
English-34 Y ou can control multiple monitors by using RS-232C, REMOTE IN or LAN daisy-chain connection. NO TE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specifi ed ID number , please execute AUTO ID (see page 27) previously . Main Monitor Sub Monitors C ...
English-35 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C (reverse type) terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF . • Switching between input signals. • Sound Mute ON or OFF . Connection LCD Monitor + computer RS-232C Cable computer RS-232C MultiSync ...
English-36 3) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d Power OFF 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d Input Source Select DisplayPort 01 30 41 30 45 30 4 ...
English-37 English Connecting to a Netw ork Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hub NOTE: Use a category 5 or higher LAN cable. LAN cable (not supplied) Netw ork ...
English-38 Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor , it is possible that items that hav ...
English-39 English Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set for IP ADDRESS SETTINGS. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor . NOTE: Consult your network administrator for the IP address when [AUTO] is selected for [IP SETTING]. IP ADDRESS Set ...
English-40 Mail Setting Click “MAIL” on the left side of HOME. This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor . ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature. Checking [DISABLE] will turn off the Alert M ...
English-41 English Alert error message list Error n umber * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor ’s power supply is not functioning normally . Standby power Abnormal Please contact your supplier . 80h ~ Fh The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier. 90h ~ 9Fh The monitor ’s b ...
English-42 SNMP Setting Click “SNMP” on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. V ersion: SNMP v1 Authenticated plaintext by community name, not return a confi rmation message of T rap. SNMP v2c Authenticated plaintext by community name, return a confi rmation message of T r ...
English-43 English AMX Setting Click “AMX” on the left side of HOME. AMX BEACON T urn on or off for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system. TIP: When using a de vice that suppor ts AMX De vice Discovery , all AMX NetLinx control system will recognize the de vice and downloa ...
English-44 Name Setting Click “NAME” on the left side of HOME. MONITOR NAME Set a monitor name. The name must be 16 characters or less. The default is model name. HOST NAME T ype in the hostname of the network connected to the monitor . Up to 15 alphanumeric characters can be used. DOMAIN NAME T ype in the domain name of the network connected t ...
English-45 English PD List Information Click “PD LIST” on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click “MEMO” on the left side of HOME. Set a title and message. TITLE A title must be 24 characters or less. MESSAGE A messag ...
English-46 Using “SET/POINT ZOOM” button on a remote control allows to enlarge a partial of image. Press CH+/- button to zoom up or down. The image can be expanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifi er . 2 Move magnifi er icon by [ ] [ ] [+] [-] button. 3 Press [CH+] to zoom up. ...
English-47 English This function allows to get the data of monitor ’s status by wireless communication even while the monitor is of f. Some menu of OSD, you can set by this function. NO TE: Sensor position: See page 9. Please contact your supplier for detailed information. Function name Setting Copy Setting read and write function Display informa ...
English-48 Reduced Footprint: Provides the ideal solution for environments with superior image quality . SPECTRA VIEW ENGINE: This system is designed for professionals with color-critical applications. Each display screen is calibrated at factory . By making adjustments directly in the display hardware, optimal settings are confi gured without any ...
English-49 English No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the main Power Switch, it should be in the ON position. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a suppor ...
English-50 Either light vertical or horizontal stripes may appear , depending on the specifi c display pattern. This is no product fault or degradation. “SCHEDULE”/“OFF TIMER” function is not working properl y • The “SCHEDULE” function will be disabled when the “OFF TIMER” is set. • If the “OFF TIMER” function is enabled an ...
English-51 English Specifi cations - X841UHD Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 84”/2134.6 mm diagonal 0.4845 mm 3840 x 2160 Over 1073 million colors (depending on video card used) 500 cd/m 2 (Max.), 380 cd/m 2 (Factory setting T yp.) @25°C 1400:1 89° (typ) @ CR>10 ...
English-52 Specifi cations - X981UHD Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 98”/2477.0 mm diagonal 0.5622 mm 3840 x 2160 Over 1073 million colors (depending on video card used) 500 cd/m 2 (Max.), 380 cd/m 2 (Factory setting T yp.) @25°C 1300:1 89° (typ) @ CR>10 Frequenc ...
English-53 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help defi ne and comply with the latest independent ...
English-54 WEEE Mark (Eur opean Directive 2012/19/EU) Within the Eur opean Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cable ...
NEC MultiSync X981UHDのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MultiSync X981UHDの取扱説明書
- NECの製品カード
- パンフレット
- またはNEC MultiSync X981UHDの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NEC MultiSync X981UHDの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、NEC MultiSync X981UHDの取り付け説明書、サービスマニュアル、簡易説明書、またはNEC MultiSync X981UHDのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NEC MultiSync X981UHDの製品を使用するにあたって最も人気のある説明書を閲覧できます。
NEC MultiSync X981UHDデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNEC MultiSync X981UHDを使用するのを助ける技術的文書のことです。説明書は通常、全てのNEC MultiSync X981UHDユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
NECの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. NEC MultiSync X981UHDの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNEC MultiSync X981UHDの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NEC MultiSync X981UHDに関してこのドキュメントで見つけることができる全てのヒントの目次
3. NEC MultiSync X981UHDデバイスの基本機能を使うにあたってのヒント。 NEC MultiSync X981UHDのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NEC MultiSync X981UHDに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNEC MultiSync X981UHDのメーカー/サービスへの連絡先に関する情報。
NEC MultiSync X981UHDについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもNEC MultiSync X981UHDの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC MultiSync X981UHDで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。