Grindmaster RAPS300Eの取扱説明書

36ページ 1.8 mb
ダウンロード

ページに移動 of 36

Summary
  • Grindmaster RAPS300E - page 1

    Shuttle Bre wer & Airpot/Shuttle Bre wer s Operation and Instruction Manual F or Models P300E, P400E, RAP300E, RAP400E, RAPS300E, RAPS400E Installation: See rough-in dra wings in this manual f or dimensions and locations of electric and water input. Set-Up/P osition 1) Remov e the brew er from the packing material and attach its legs. 2) P osit ...

  • Grindmaster RAPS300E - page 2

    Pag e 2 Shuttle Brewer s & Airpot/Shuttle Brewer s Installation (con't) Electric Hook-up 1) The electric ratings f or your bre wer are printed on its nameplate. T ypical electric ratings are: P300, P400, RAP300, RAP400 Optional 120/208V , 3.8kW , 18A or 120/240V 5.0kW , 21A, 1 phase Standard 120/208V , 5.0kW , 24A or 120/240V 6.6kW , 28A, ...

  • Grindmaster RAPS300E - page 3

    Pag e 3 Operation 1) RAPS Brew ers require the accessor y warmer base placed ov er the pegs on the brew shelf bef ore brewing into a shuttle . Plug the base into the receptacle on the side of the brew er . The receptacle is only energized when a shuttle is in place . 2) Place an empty , warm shuttle or air pot on the shelf , counter , or accessor y ...

  • Grindmaster RAPS300E - page 4

    Pag e 4 Adjustments All adjustable components are located under the top co v er . T o access these par ts: 1) Shut off the electric line to the brewer or unplug the bre wer . 2) Remov e the single screw f astening the top cov er . Remov e the top cov er . 3) Pull f orward and lift off the top co ver . Brew V olume , Brew Timer The brew v olume of t ...

  • Grindmaster RAPS300E - page 5

    Pag e 5 Two Batch Timer with Knob Adjustment, See Figure 2: This timer is adjustable from 15 seconds to 5 min utes. Locate the adjustment knobs under the top cov er . Set this timer by adjusting the knob . The batch selector s witch picks the adjustment potentiometer which the timer will see. Figure 2 T wo Batch Timer Two Batch Timer with Counter A ...

  • Grindmaster RAPS300E - page 6

    Pag e 6 T o Adjust the Bypass: 1) Shut off and open brew er as described at the beginning of the adjustments section. 2) Locate the bypass v alve f or the brew head you wish to adjust. V alve is on the right and front of the BREW v alve . 3) Open the v alve (counter cloc kwise) to the desired setting. Use the table belo w as a guide: BYP ASS SETTIN ...

  • Grindmaster RAPS300E - page 7

    Pag e 7 4) If the maximum temperature adjustment needs to be increased, insert a small flat screwdriver into the shaft. T ur n the calibration screw counter cloc kwise to increase the maximum temperature . Optional Solid State Thermostat: This control maintains temperature within 3°F . The adjustable range is from 155°F to 205°F . See Figure 6. ...

  • Grindmaster RAPS300E - page 8

    Pag e 8 Cleaning After Each Bre w: 1) Dispose of grounds and rinse brew bask et. 2) Rinse shuttle or air pot containers bef ore reuse. Every Day: 1) W ash brew basket with w ar m soap y water . The wire basket is remov able to aid cleaning. 2) Remov e spray head(s), located abo v e brew bask et(s), using glov es or a heavy to wel. W ash off coffee ...

  • Grindmaster RAPS300E - page 9

    Pag e 9 W eekly or Bi-W eekly , Depending on Use 1) Fill shuttles with one gallon, 2/3 full, of hot water . 2) P our into the shuttle liners the recommended concentration of ur n cleaner (e xcessiv e amounts of cleaner will attack the stainless steel). Ur n cleaners that ha ve been used successfully: DIP-IT , manuf actured by Economics Labor atorie ...

  • Grindmaster RAPS300E - page 10

    Pag e 1 0 Service (con't) Drain W ater T ank Alwa ys empty the tank before shipping. Note: Brew er ma y contain ov er 5 gallons of hot water . 1) Prepare a heat resistant container to drain tank w ater into . 2) Shut off pow er to the brewer . 3) Remov e the front access panel. 4) Pinch or clamp the silicone hose connected to fill v alve . 5) ...

  • Grindmaster RAPS300E - page 11

    Pag e 1 1 T r oubleshooting: Filling, Heating, and Bre wing Overfilling water tank even when power is off. Fill valv e not sealing properly . Fill valv e installed backw ards. W ater entering tank continuously , usually slowly . Look f or direction of arrow on v alv e body . Disassemble v alve and clean out dir t. V alve ma y need new plunger if se ...

  • Grindmaster RAPS300E - page 12

    Pag e 1 2 Shuttle Brewer s & Airpot/Shuttle Brewer s If you still need help, call our Technical Service Department at (502) 425-4776 or (800) 695-4500 (USA & Canada only) Monday thru Friday 8 am - 8 pm EST or an authorized service center in your area. Please have the model and serial numbers ready so that accurate information can be given. ...

  • Grindmaster RAPS300E - page 13

    Pag e 1 3 T r oubleshooting: Filling, Heating, and Bre wing Brewing Pr oblems The brewing system consists of the f ollowing components: • Star t and Stop , switches located in the top control panel. • Brew Timer , located in the top control section under the top cover . • Brew V alv e, located in the top control section under the top cov er . ...

  • Grindmaster RAPS300E - page 14

    Pag e 1 4 P ar ts Illustration for Models P300E & P400E Shuttle Brewer s & Airpot/Shuttle Brewer s Item Pa r t # Description Item Pa r t # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOOT 13 A725-081 BRASS SPRA Y TEE W/ BYP ASS TUBING 1 A545-015 LEG, 4” SS (OPTIONAL) 14 A530-009 BREW TIMER 0-8 MINUTES 2 A537-043 HO T W A TER F A UCET W ...

  • Grindmaster RAPS300E - page 15

    Pag e 1 5 P ar ts Illustration for Model RAP400E Shuttle Brewer s & Airpot/Shuttle Brewer s Item Pa r t # Description Item Pa r t # Description 1 A548-072 LEG, R UBBER (RAP400) 11 A515016 PILO T LIGHT 1 A545-004 LEG, PLASTIC 4” (OPTIONAL RAP 400) 12 A725-082 SPRA Y TEE KIT W/ BYP ASS PLUG 1 A548-090 LEG, PLASTIC PLUG (RAP300) 13 A530-009 BREW ...

  • Grindmaster RAPS300E - page 16

    Pag e 1 6 P ar ts Illustration for Model RAPS400E Shuttle Brewer s & Airpot/Shuttle Brewer s FR ONT Item Pa r t # Description Item Pa r t # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOOT 16 A725-081 BRASS SPRA Y TEE W/ BYP ASS TUBING 1 A545-015 LEG, 4” SS (OPTIONAL) 17 A585-021 SPRA Y TUBING 3/8” ID X 5/8”OD X 6”LG 2 A537-043 HO T ...

  • Grindmaster RAPS300E - page 17

    Pag e 1 7 Shuttle Brewer s & Airpot/Shuttle Brewer s TOP (COVER REMOVED) FRONT FRONT (COVER REMOVED) 5 4 3 2 1 11 10 16 20 22 9 17 19 18 23 15 14 13 12 8 7 6 21 P ar ts Illustration for Model VSB-400 Item Pa r t # Description Item Pa r t # Description 1 A545-034 LEG, 4” PLASTIC W/ SS FOO T 12 A725-081 SPRA Y TEE KIT W/ BYP ASS TUBING 1 A545-0 ...

  • Grindmaster RAPS300E - page 18

    P ar ts Illustration for Shuttle CS-LL Item Pa r t # Description 1 A537-053 F A UCET MODEL ES 2 A522078 SHANK W/ CHROME BONNET 3 A718-018 GA UGE ASSEMBL Y 4 A725-092 KIT , SHUTTLE LID A713-027 SS SHUTTLE CO VER (not shown)* 5 A548-142 LID RET AINING CLIP 6 A548-140 A61365 LID ST OPPER W/ O-RING * S.S . Cover used until A ugust 2001 1 2 3 4 5 6 A537 ...

  • Grindmaster RAPS300E - page 19

    Pag e 1 9 Shuttle Brewer s & Airpot/Shuttle Brewer s Rough-In Drawing f or Model P-300 ...

  • Grindmaster RAPS300E - page 20

    Rough-In Drawing f or Model P-400 Pag e 2 0 Shuttle Brewer s & Airpot/Shuttle Brewer s ...

  • Grindmaster RAPS300E - page 21

    Pag e 2 1 Shuttle Brewer s & Airpot/Shuttle Brewer s Rough-In Drawing f or Model RAP-300 ...

  • Grindmaster RAPS300E - page 22

    Rough-In Drawing f or Model RAP-400 Pag e 2 2 Shuttle Brewer s & Airpot/Shuttle Brewer s ...

  • Grindmaster RAPS300E - page 23

    Pag e 2 3 Shuttle Brewer s & Airpot/Shuttle Brewer s Rough-In Drawing f or Model RAPS-300 ...

  • Grindmaster RAPS300E - page 24

    Pag e 2 4 Shuttle Brewer s & Airpot/Shuttle Brewer s Rough-In Drawing f or Model RAPS-400 ...

  • Grindmaster RAPS300E - page 25

    Pag e 2 5 Shuttle Brewer s & Airpot/Shuttle Brewer s Rough-In Drawing f or Model VSB-300 W W W W W A TER IM S ...

  • Grindmaster RAPS300E - page 26

    Rough-In Drawing f or Model VSB-400 Pag e 2 6 Shuttle Brewer s & Airpot/Shuttle Brewer s ...

  • Grindmaster RAPS300E - page 27

    Pag e 2 7 Shuttle Brewer s & Airpot/Shuttle Brewer s Wiring Diagram f or P300E/P400E, with 1 Batch Timer NO TE: THIS DRAWING SHO WS COMPONENTS ON ST ANDARD MODEL ONL Y . SEE 091-548 FOR WIRING OF BREWER OPTIONS ...

  • Grindmaster RAPS300E - page 28

    Wiring Diagram f or P300E/P400E, with 2 Batch Timer NO TE: THIS DRAWING SHO WS COMPONENTS ON ST ANDARD MODEL ONL Y . SEE 091-548 FOR WIRING OF BREWER OPTIONS Pag e 2 8 Shuttle Brewer s & Airpot/Shuttle Brewer s ...

  • Grindmaster RAPS300E - page 29

    Pag e 2 9 Shuttle Brewer s & Airpot/Shuttle Brewer s Wiring Diagram f or RAP300E/400E NO TE: THIS DRAWING SHO WS COMPONENTS ON ST ANDARD MODEL ONL Y . SEE 091-548 FOR WIRING OF BREWER OPTIONS Drawing #091-545 ...

  • Grindmaster RAPS300E - page 30

    Wiring Diagram f or RAPS 300/400E NO TE: 1) TWO SETS OF RECEPT ACLE COMPONENTS ONL Y PRO VIDED ON TWIN RAPS400E MODEL. DELETE GR OUP IN D ASHED BO X FOR RAPS300E. 2) THIS DIAGRAM SHO WS COMPONENTS ON ST AN- D ARD MODEL ONL Y . SEE 091-548 FOR WIRING OF BREWER OPTIONS. Drawing #091-523 Shuttle Brewer s & Airpot/Shuttle Brewer s Pag e 3 0 ...

  • Grindmaster RAPS300E - page 31

    Pag e 3 1 Shuttle Brewer s & Airpot/Shuttle Brewer s Wiring Diagram #091-548 NO TE: 1) ONE GROUP OF WARMER COMPONENTS PER BREW HEAD ON P AND RAPS MODELS. 2) TRANSFORMER MUST BE USED WHEN NEUTRAL LINE IS NO T PRO VIDED . 3) IF MODEL RAP , DELETE W ARMER COMPONENTS. 4) IF MODEL IS RAPS, DELETE WARMER LIGHT AND REPLACE W ARMER ELEMENT WITH NEMA 6- ...

  • Grindmaster RAPS300E - page 32

    Wiring Diagram #091-182 T3 T3 T3 1 1 T4 A T2 T3 T3 T4 T4 T4 B T2 T3 T3 1 1 T1 C T3 T3 T3 T1 T1 T4 D T2 T3 T3 T1 T1 T4 E T2 T3 T3 T1 T1 T2 F NO TE: USE WIRE NUT FOR 1 - 1 CONNECTION 5000 W A TT / 240V HEA TERS * SEP ARA TE 120V REQUIRED FOR CONTR OLS (3 AMP LOAD) 2.0 KW - 120/208V - 1 PH - 3 WIRE - 9 AMPS 2.5 KW - 120/240V - 1 PH - 3 WIRE - 11 AMPS ...

  • Grindmaster RAPS300E - page 33

    Pag e 3 3 Shuttle Brewer s & Airpot/Shuttle Brewer s Notes ...

  • Grindmaster RAPS300E - page 34

    Pag e 3 4 Shuttle Brewer s & Airpot/Shuttle Brewer s Notes ...

  • Grindmaster RAPS300E - page 35

    Pag e 3 5 Shuttle Brewer s & Airpot/Shuttle Brewer s Notes ...

  • Grindmaster RAPS300E - page 36

    Grindmaster Corporation 4003 Collins Lane Louisville, KY 40245 USA (502) 425-4776 (800) 695-4500 F AX (502) 425-4664 www .grindmaster .com © Grindmaster Cor poration, 1995 PRINTED IN USA Shuttle Bre wer & Airpot/Shuttle Bre wer s W ARRANTY GENERAL W ARRANTY INFORMA TION Grindmaster Cor poration maintains the highest standard of quality control ...

メーカー Grindmaster カテゴリー Coffeemaker

Grindmaster RAPS300Eのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RAPS300Eの取扱説明書
- Grindmasterの製品カード
- パンフレット
- またはGrindmaster RAPS300Eの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Grindmaster RAPS300Eの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Grindmaster RAPS300Eの取り付け説明書、サービスマニュアル、簡易説明書、またはGrindmaster RAPS300Eのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Grindmaster RAPS300Eの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Grindmaster RAPS300Eデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがGrindmaster RAPS300Eを使用するのを助ける技術的文書のことです。説明書は通常、全てのGrindmaster RAPS300Eユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Grindmasterの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Grindmaster RAPS300Eの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははGrindmaster RAPS300Eの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Grindmaster RAPS300Eに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Grindmaster RAPS300Eデバイスの基本機能を使うにあたってのヒント。 Grindmaster RAPS300Eのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Grindmaster RAPS300Eに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるGrindmaster RAPS300Eのメーカー/サービスへの連絡先に関する情報。

Grindmaster RAPS300Eについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもGrindmaster RAPS300Eの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがGrindmaster RAPS300Eで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)