Sony CMT-CP100の取扱説明書

24ページ 0.29 mb
ダウンロード

ページに移動 of 24

Summary
  • Sony CMT-CP100 - page 1

    Micr o Hi-Fi Component System © 2001 Sony Corporation Operating Instructions 4-233-754- 12 (1) CMT -CP100 Owner’s Record The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. ...

  • Sony CMT-CP100 - page 2

    2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER P ...

  • Sony CMT-CP100 - page 3

    3 Parts Identification Main unit ............................................... 4 Remote Control ..................................... 5 Getting Started Hooking up the system .......................... 6 Inserting two size-AA (R6) batteries into the remote control ........................... 7 Setting the time ..................................... ...

  • Sony CMT-CP100 - page 4

    4 Parts Identification The items are arranged in alphabetical order. Refer to the pages indicated in parentheses () for details. Main unit BASS 3 (16 ) C D EJECT Z qj (8 ) CD SYNC qs (13, 14) CD u ws ( 8, 9) CD x qk (8, 9, 21) CD . / > ql ( 8, 9) CD m / M ql (8 ) DSG 5 ( 16, 18 ) FUNCTION wf (8 ~ 10, 12, 13, 18) PHONES jack wd PLAY MODE wa ( 8, ...

  • Sony CMT-CP100 - page 5

    Parts Identification 5 Remote Control CD REPEAT qk (8) CD N ws ( 8, 9) DIR MODE ql ( 12~ 14) DISPLAY 2 ( 9, 11) DSG 1 (1 6 ) ENTER qd ( 7, 10, 14, 17) MEMORY qh (10 ) PLAY MODE 9 ( 8, 9, 14) SLEEP qf (1 6 ) STEREO/MONO qj (1 1 ) TAPE Y w; ( 12~ 14) TIMER SELECT qs ( 15, 17 ) TIMER SET qg (7, 14, 17 ) TUNER/BAND wa (1 0 ) TUNING MODE q; ( 10, 11 ) V ...

  • Sony CMT-CP100 - page 6

    6 Jack type A F M 7 5 Ω A M U ANTENN A Jack type B FM75 Ω A M ANTENNA U U Getting Started Hooking up the system Follow steps 1 through 4 of the procedure below to hook up your system using the supplied cords and accessories. 4 2 3 1 AM loop antenna Left speaker Right speaker FM antenna 1 Connect the speakers. Connect the right and left speaker ...

  • Sony CMT-CP100 - page 7

    7 Getting Started 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 110V -120V 220V -240V VOLT AGE SELECTOR 4 Connect the power cord to a wall outlet. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To turn on the system, press @ / 1 . I ...

  • Sony CMT-CP100 - page 8

    8 CD Loading the CD 1 Press CD EJECT Z . The disc tray slides out. 2 Load a CD onto the disc tray. ?/1 Z u x . > m M 3 Press CD EJECT Z again to close the disc tray. Notes • The disc cannot be viewed through the front window when a CD single (8 cm CD) is loaded. • The characters printed on the disc appear upside down when viewed through the ...

  • Sony CMT-CP100 - page 9

    9 CD Programming the CD tracks –– Program Play You can make a program of up to 24 tracks on a CD in any order that you want. 1 Turn FUNCTION until “CD” appears in the display. 2 Press PLAY MODE repeatedly until “PGM” appears in the display. 3 Press CD . / > repeatedly until the desired track number appears in the display. 3 243 PGM 4 ...

  • Sony CMT-CP100 - page 10

    10 Tuner Presetting radio stations The system can store a total of 30 preset stations (20 for FM and 10 for AM). 1 Turn FUNCTION until “TUNER” appears in the display. The indicator surrounding the TUNER BAND button lights up. 2 Press TUNER BAND to select FM or AM. 3 Press TUNING MODE repeatedly until “AUTO” appears in the display. 4 Press T ...

  • Sony CMT-CP100 - page 11

    11 Tuner To tune in a non-preset radio station In step 3, press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display, then press TUNING +/– (or m / M on the remote) repeatedly to tune in the desired station (Manual Tuning). Tips • If there is static during an FM broadcast, press STEREO/MONO on the remote until “ ...

  • Sony CMT-CP100 - page 12

    12 Tape Loading a tape 1 Press TAPE EJECT Z . 2 Load a recorded/recordable tape into the cassette holder. Z Y ?/1 x m M zX Playing a tape You can use Type I (normal) tape. 1 Load a recorded tape into the cassette holder. 2 Turn FUNCTION until “TAPE” appears in the display. The indicator surrounding the TAPE Y and TAPE x buttons lights up. 3 Pre ...

  • Sony CMT-CP100 - page 13

    13 Tape Recording from a CD (CD Synchro Recording) Recording manually Load a recordable tape into the cassette holder. Load a CD onto the disc tray. Load a CD or tune in the desired station. Turn FUNCTION until “CD” appears in the display. Turn FUNCTION to select the source you want to record from. Press CD SYNC. Press TAPE REC z (or z REC on t ...

  • Sony CMT-CP100 - page 14

    14 Recording CD tracks in your favorite order –– Program Edit 1 Load a recordable tape into the cassette holder. 2 Load a CD onto the disc tray. 3 Do steps 1 through 5 in Program Play (see page 9). 4 Press CD SYNC. The tape stands by for recording and the CD stands by for playback. “ ” and “ B ” (or “ b ”) appear, and the CD SYNC in ...

  • Sony CMT-CP100 - page 15

    15 Tape To Check the settings Turn off the timer Tip Once you set the timer, the time settings will remain in the system’s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. Notes • The system will turn on 15 seconds before the specif ...

  • Sony CMT-CP100 - page 16

    16 Other Features Falling asleep to music — Sleep Timer The Sleep Timer Function lets you specify a sleep time, after which the system stops playing and turns off automatically. You can thus fall asleep to music. Press SLEEP on the remote repeatedly. The sleep time changes as follows: AUTO* t 90MIN t 80MIN t 70MIN t … t 10MIN t OFF t AUTO* t ? ...

  • Sony CMT-CP100 - page 17

    17 Other Features 1 Prepare the music source you want to listen to when the system turns on. • CD: Load a CD. To start playing from a specific track, make a program (see “Programming the CD tracks” on page 9). • Tape: Load a tape with the side you want to play facing towards you. • Radio: Tune in the preset radio station that you want (se ...

  • Sony CMT-CP100 - page 18

    18 Optional Components Hooking up the optional components You can connect a variety of components to your system in order to enhance it. Make sure that the color of the plugs matches that of the connectors. * If the jack is covered with a cap, remove it before use. To Make a digital recording from CD to MD Listen to the connected MD deck Listen to ...

  • Sony CMT-CP100 - page 19

    19 Additional Information Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if th ...

  • Sony CMT-CP100 - page 20

    20 T roubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony d ...

  • Sony CMT-CP100 - page 21

    21 Additional Information Tuner There is a severe hum or noise (“TUNED” or “STEREO” flashes). • Adjust the antenna. • The signal strength is too weak. Connect an external antenna. • Make sure that the antenna is connected properly. • Do not bend or roll up the antenna. • The two wires comprising the FM antenna have been pulled fur ...

  • Sony CMT-CP100 - page 22

    22 CD player section System Compact disc and digital audio system Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Wavelength 780 - 790 nm Frequency response 2 Hz - 20 kHz (±0.5 dB) Tape player section Recording system 4-track 2-channel stereo Frequency response 50 - 13,000 Hz (±3 dB), using a Sony TYPE I cassette Wow and fl ...

  • Sony CMT-CP100 - page 23

    23 Additional Information ...

  • Sony CMT-CP100 - page 24

    Sony Corporation Printed in Korea ...

メーカー Sony カテゴリー Stereo System

Sony CMT-CP100のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CMT-CP100の取扱説明書
- Sonyの製品カード
- パンフレット
- またはSony CMT-CP100の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sony CMT-CP100の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sony CMT-CP100の取り付け説明書、サービスマニュアル、簡易説明書、またはSony CMT-CP100のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sony CMT-CP100の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sony CMT-CP100デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSony CMT-CP100を使用するのを助ける技術的文書のことです。説明書は通常、全てのSony CMT-CP100ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sonyの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sony CMT-CP100の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSony CMT-CP100の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sony CMT-CP100に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sony CMT-CP100デバイスの基本機能を使うにあたってのヒント。 Sony CMT-CP100のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sony CMT-CP100に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSony CMT-CP100のメーカー/サービスへの連絡先に関する情報。

Sony CMT-CP100についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSony CMT-CP100の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSony CMT-CP100で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)