-
HP (Hewlett-Packard) v220 - page 1
v220 LCD Monitor User’ s Guide ...
-
HP (Hewlett-Packard) v220 - page 2
The only warranties for HP products an d ser vices are set forth in the express wa rranty statements accompanying such products and ser vices. Nothing herein should be construed as constituting an additional warranty . HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the u se o ...
-
HP (Hewlett-Packard) v220 - page 3
3 Preface About This Guide This guide is intended for anyone who us es the v220 LCD Monitor. It describes the monitor’s fe atures, setup, and operation. The sections are as follows: • Safety and Maintenance Guidelines • Setup • Using the Monitor • Installing Drivers and Using the Auto -Adjustment Feature • T echnical Suppor t F AQs • ...
-
HP (Hewlett-Packard) v220 - page 4
4 Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. For informatio n on the correct power cord set to use with your monitor, see Power Cord Set Requirements . WARNING: To reduce the risk of ...
-
HP (Hewlett-Packard) v220 - page 5
5 • Install your monitor near an outlet that you can easily reach. Disconnect the moni tor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord. • Do not allow anything to rest on the power cord. Do not walk on the cord. Maintenance Guidelines To enhance the performance and extend the life ...
-
HP (Hewlett-Packard) v220 - page 6
6 Setup Base and Tilt Attaching the Base 1 Set the base on a flat surface, such as a table top. 2 Using both hands, position the pedestal over the base an d press down firmly to lock in place. Make sure that the base is securely locked in place befo re continuing with the setup procedure. CAUTION: To prevent damage, av oid applying pressure to the ...
-
HP (Hewlett-Packard) v220 - page 7
7 Removing the Base 1 Set the panel face-down on a flat, protected sur face. 2 Squeeze the tabs in the bottom of the base to release t he lock. 3 Remove the base from the pedestal. CAUTION: To prevent damage, av oid applying pressure to the panel front. Adjusting the Tilt For optimal viewing, adjust the screen tilt to your o wn preference, as follo ...
-
HP (Hewlett-Packard) v220 - page 8
8 Cables Attaching the Cables 1 T urn off your computer . 2 Connect the built-in monitor speakers to the co mputer , using the audio cable (green connector). 3 If you are attaching a VGA cable, connect one end of the 15-pin D-S ub VGA cable (blue connector) to the back of the monitor and connect the other end to the computer VGA port. ...
-
HP (Hewlett-Packard) v220 - page 9
9 4 Connect one end of the power cord to the back of the monitor and plug the other end into a grounded outlet. 5 T urn on your monitor and computer . If your monitor displays an image, installation is complete. If it does not display an image, see Technical Support FAQs and Using the Monitor . ...
-
HP (Hewlett-Packard) v220 - page 10
10 Wa l l M o u n t i n g A r m Preparing to Install a W all Mounting Arm (Not supplied) This monitor can be attached to a wall mo unting arm that you purchase separately. CAUTION: Before disassembling the monitor, turn off the monitor power, and disconnect all power, video, and audio cables. 1 Disconnect the cables from the monitor . 2 With the pa ...
-
HP (Hewlett-Packard) v220 - page 11
11 Using the Monitor Operating Instructions Control buttons are located on the front of th e panel, as shown below. Use the Menu button ( C ) to adjust the display settings to your personal preferences: • Set up the monitor , attach the cables, an d adjust the tilt as described in the Setup section above. • Press the Power button ( F ) to turn ...
-
HP (Hewlett-Packard) v220 - page 12
12 External Contr ols A – (minus) button Navigates backward through th e OSD menu and decreases adjustment levels. If the OSD menu is inactive, activates the Volume decrease. B + (plus) button Navigates forward through the OSD menu and increases adjustment levels. If the OSD menu is inactive, activates the Volume increase. C Menu button Opens, se ...
-
HP (Hewlett-Packard) v220 - page 13
13 Settings Setting the Optimal Resolution The recommended resolution for this monitor is 1 680 x 1050. To configure the monitor to this resolut ion, complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on and do the following: 1 Click the Windows Start Button ® , and then click Control Panel . ...
-
HP (Hewlett-Packard) v220 - page 14
14 Adjusting On-Screen Display Settings Use the OSD menu to adjust the screen image and change settings. To access the OSD menu: 1 If the monitor is not already on, press th e Power button to turn the monitor on. 2 Press the Menu button to activate the OSD menu. 3 Press the – (minus) and + (plus) buttons to navigate through the functions. Once th ...
-
HP (Hewlett-Packard) v220 - page 15
15 OSD Menu The table below shows the OSD menus an d their func tions at each level. OSD Menu Levels Level 1 Level 2 Level 3 Factory Preset Brightness Adjustment Scale Y Reset Cancel Save and Return Contrast Adjustment Scale Y Reset Cancel Save and Return V olume Adjustment Scale Y Image Control Auto Adjustment “Adjusting” Message Y Horizontal ...
-
HP (Hewlett-Packard) v220 - page 16
16 OSD Menu Levels ( continued ) Level 1 Level 2 Level 3 Factory Preset Language Deutsc h Simplified Chinese J apanese English English Español Français Italiano Nederlands Cancel Save and Return Management Power Saver On / Off Selection Y Power On Recall On / Off Selection Y Mode Display On / Off Selection Y Power-On Status Displa y Top/Middle/Bo ...
-
HP (Hewlett-Packard) v220 - page 17
17 Installing Drivers and Using the Auto-Adjustmen t Feature Downloading Drivers and Software To download the latest version of drivers and software files from the HP Support Web site: 1 Refer to: http://www .hp.com/suppor t 2 Select your countr y/region. 3 Select Download Drive rs and Software . 4 Enter the model number of your monitor . The softw ...
-
HP (Hewlett-Packard) v220 - page 18
18 T echnical Suppor t F AQs T echnical Support F AQs (Frequently Asked Questions) Problem & Question Possible Solutions Power LED is not on. • Make sure the Power button is on and the power cord is properly connected to a grounded power outlet and to the monitor . No Plug & Play. • In order for the Plug & Play feature of the monito ...
-
HP (Hewlett-Packard) v220 - page 19
19 T echnical Support F AQs (Frequently Asked Questions) ( continued ) Problem & Question Possible Solutions Missing one of the primary colors (red, green, or blue). • Inspect the monitor’ s video cable an d make sure that none of the pins are bent. • Make sure the monitor’ s video cabl e is properly connected to the computer . Screen i ...
-
HP (Hewlett-Packard) v220 - page 20
20 Specifications All specifications represent the typi cal specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. v220 Display T ype 22 inches, TFT LCD 55.88 cm Viewable Im age Size 22-inch diagonal 55.88 cm T ilt –5° to 20° Face T reatment Antiglare po larizer with hard coating (select m ...
-
HP (Hewlett-Packard) v220 - page 21
21 Preset Display Modes Preset Pixel Format Horizontal Frequency (kHz) Ve r t i c a l Frequency (Hz) 1 640 x 480 31.47 59.94 2 640 x 480 37.50 75.00 3 720 x 400 31.47 70.08 4 800 x 600 37.88 60.32 5 800 x 600 46.88 75.00 6 832 x 624 49.72 74.55 7 1024 x 768 48.36 60.00 8 1024 x 768 60.02 75.03 9 1152 x 720 44.86 60.00 10 1152 x 870 68.68 75.06 11 1 ...
-
HP (Hewlett-Packard) v220 - page 22
22 Power Cord Set Requirements The monitor power supply is provided wi th automatic line switching ( ALS). This feature allows the monitor to operate on input voltages in the range of 100–240V ∿ , 50/60 Hz, 1.5A. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in th e country/region where ...
-
HP (Hewlett-Packard) v220 - page 23
23 Plug and Play DDC2B Feature This monitor is equipped wi th VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the leve l of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on th ...
-
HP (Hewlett-Packard) v220 - page 24
24 Modifications The FCC requires the user to be notified that any chan ges or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. Cables Connections to this device mu st be made with shielded cables with me tallic RFI/EMI connector hoods to maintain ...
-
HP (Hewlett-Packard) v220 - page 25
25 Europea n Union Regulatory Notice This product complies with the following EU directives: • Low V oltage Directive 2006/95/E C • EMC Directive 2004/10 8/EC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conf ormity issued by Hewlett-Pa ...
-
HP (Hewlett-Packard) v220 - page 26
26 Disposal of W aste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates th at this product must not be disposed of with your other household waste. Instead, it is your responsibil ity to dispose of your waste equipment by handing it over to a designated collection point for the r ...
-
HP (Hewlett-Packard) v220 - page 27
27 Japanese Power Cord Notice Japanese Material Content Declaration A Japanese regulatory requirement, defined by Specification JIS C 0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declarat ion for this p ...
-
HP (Hewlett-Packard) v220 - page 28
28 HP Recycling Pr ogram HP offers product end-of-life return programs for HP an d other manufacturers’ hardwa re in several geographic areas. The terms and availability of these programs vary by geography because of di fferences in regulatory requirements and local customer demand. For information on the HP recycling program, refer to the HP Web ...
-
HP (Hewlett-Packard) v220 - page 29
29 ...
-
HP (Hewlett-Packard) v220 - page 30
Part numb er: 460090-001 ...
HP (Hewlett-Packard) v220についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHP (Hewlett-Packard) v220の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHP (Hewlett-Packard) v220で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。