-
Airlink101 AR504 - page 1
Quick Installation Guide Model # AR504 Ve r . 1 A ...
-
Airlink101 AR504 - page 2
Section 1 Connect the Router Note : Prior to connecting the router , be sure to power of f your computer , DSL/Cable modem, and the router . Step 1 Connect one end of a network cable to the WA N port of the router and connect the other end of the cable to the DSL/Cable modem. S tep 2 With another network cable, connect one end of the cable to your ...
-
Airlink101 AR504 - page 3
Section 2 V erify Connection to Router Step 1 Go to Start , Run , type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Y ou will see the command prompt as below . Step 2 T ype ping 192.168.1.1 and press Enter . Y ou should get four reply responses back. Step 3 If you get Request timed out , or Destination host unreachable ...
-
Airlink101 AR504 - page 4
Step 5 T ype ipconfig/renew and press Enter . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configure the Router . If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try ipconfig/renew again. Step 6 ...
-
Airlink101 AR504 - page 5
Step 8 After your IP address is released, click Renew . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button at the back of the router for 10 seconds while it is ON and try Renew again. Section 3 Configure the Router Step 1 Open the web ...
-
Airlink101 AR504 - page 6
Step 3 Click on Wizard from the main menu to open the Setup Wizard. Step 4 Click Next to begin the Setup Wizard. Step 5 Select your W AN T ype (Internet Connection T ype) and click Next . If you are not sure what your Internet Connection T ype is, please contact your Internet Service Provider (ISP) for assist ance. St atic IP If your ISP provided y ...
-
Airlink101 AR504 - page 7
Step 6 Follow the step s below according to your Internet Connection T ype. St atic IP Fill in the applicable fields according to the information provided by your ISP . Click Next when done and proceed to Step 7 . Cable Modem If your ISP has provided you with a host name, enter it in the Host Name field. If your ISP requires a registered MAC Addres ...
-
Airlink101 AR504 - page 8
Road Runner Fill in the applicable fields according to the information provided by your ISP . Click Next when done and proceed to Step 7 . DSL Fill in the applicable fields according to the information provided by your ISP . Click Next when done and proceed to Step 7 . Note: Depending on the ISP , you may need to include the domain name with your a ...
-
Airlink101 AR504 - page 9
PPTP Fill in the applicable fields according to the information provided by your ISP . Click Next when done and proceed to Step 7 . L2TP Fill in the applicable fields according to the information provided by your ISP . Click Next when done and proceed to Step 7 . ...
-
Airlink101 AR504 - page 10
Step 8 Click OK to confirm reboot. Step 9 W ait for the router to reboot and proceed to Section 4, V erify Connection S t atus . Step 7 Click Reboot to apply your settings. ...
-
Airlink101 AR504 - page 11
Section 4 V erify Connection S t atus Step 1 Login to the router ’s web configuration page and click on the St atus link from the Main Menu. Step 2 V erify that the W AN St atus displays valid numbers (instead of all 0’s). If you use Cable modem and you see all 0’s, click on the Renew button. If you use DSL and you see all 0’s, click on the ...
-
Airlink101 AR504 - page 12
Section 5 T roubleshooting For Cable Modem Users Only Step 1 Go to the router ’ s Setup Wizard. Step 2 At the Cable Modem setting ( Dynamic IP Address ), click on the Clone MAC button and click Next . Step 3 Once you clicked the Renew or Connect button, you should see some numbers under W AN St atus . This means you have successfully established ...
-
Airlink101 AR504 - page 13
For Cable Modem and DSL Users Step 1 Power of f the Cable/DSL modem, router , and computer and wait for 5 minutes . Step 2 T urn on the Cable/DSL modem and wait for the light s on the modem to settle down. Step 3 T urn on the router and wait for the light s on the router to settle down. Step 4 T urn on the computer . Step 5 Redo the Setup Wizard. S ...
Airlink101 AR504についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもAirlink101 AR504の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAirlink101 AR504で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。