ページに移動 of 72
E n 5.1ch Home Theater System HT -SP904 AV Receiv er (HT -R557) Front Speak ers (SKF-750F) Center Speaker (SKC-750C) Surround Speak ers (SKM-750S) Po wered Subwoofer (SKW -750) Remote Interactiv e Dock (DS-A1X) Instruction Manual Thank you for purchasing an Onkyo 5.1ch Home Theater System. Please read this manual thoroughly before making connection ...
2 Important Safety Instructions 1. Read these instructions. 2. K eep these instructions. 3. Heed all w arnings. 4. F ollow all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near an y he ...
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illegal with- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the unit ...
4 Speaker Precautions Placement • The speaker cabinets are made out of wood and are therefore sensitiv e to extreme temperatures and humidity , do not put them in locations subject to direct sunlight or in humid places, such as near an air condi- tioner , humidifier, bathroom, or kitchen. • Do not put water or other liquids close to the speake ...
5 Pa ck ag e Contents —Continued * In catalogs and on packaging, the letter at the end of the product name indicates the color . Specifications and oper- ation are the same regardless of color . Front speaker s (SKF-750F) Center speaker (SKC-750C) Surround speaker s (SKM-750S) Subwoofer (SKW -750) Speaker cable for fr ont speakers 11 ft. (3.5 m) ...
6 Features Amplifier • 5-channel amplifier • 110 watts per channel rms into 8 ohms, 2 channels driv en at 1 kHz, less than 0.9% total harmonic distor- tion (FTC rating) • WRA T (Wide Range Amplifier T echnology) • Non-Scaling Configuration • Massiv e High Current Power Supply (H.C.P .S.) trans- former • Optimum Gain V olume Circuitr ...
7 Contents Introduction Important Safety Instructions ....................2 Precautions ................................................. 3 Speaker Precautions ..................................4 Package Contents .......................................4 Features ....................................................... 6 Getting to Know the AV Receiv ...
8 Connect the speakers and y our A V components to the A V receiver . ☞ page 18 OUT OUT CBL/SAT IN IN IN IN IN IN IN IN VCR/DVR IN DVD IN OUT COMPONENT VIDEO Y C B/ P B C R/ P R IN 1 IN 2 OUT HDMI ANTENNA FM AM 75 SUB WOOFER FRONT SURROUND CENTER CD RR L L TAPE OUT CBL/SAT CBL/SAT VCR/DVR VCR/DVR DVD DVD R L S V MONITOR OUT S V PRE OUT SUB WOOFER ...
9 Getting to Kno w the A V Receiver For detailed information, see the pages in parentheses. A ST ANDBY/ON button (36) Sets the A V receiv er to On or Standby . B ST ANDBY indicator (36) Lights up when the A V receiv er is on Standby and flashes while a signal is being receiv ed from the remote controller . C Remote-control sensor (12) Receiv es co ...
10 Getting to Know the A V Receiver —Continued For detailed information, see the pages in parentheses. 1 MUTING indicator (49) Flashes while the A V receiv er is muted. 2 Input signal format indicator s Show the audio signal format of the current input source. 3 Listening mode indicators (52) Show the selected listening mode. 4 Radio indicators F ...
11 Getting to Know the A V Receiver —Continued A DIGIT AL IN OPTICAL 1, 2 and CO AXIAL 1, 2 These optical and coaxial digital audio inputs are for connecting components with optical or coaxial digital audio outputs, such as CD and D VD players. B HDMI IN 1, 2, and OUT These jacks are for connecting HDMI-compatible components. Audio and video sign ...
12 Remote Contr oller Notes: • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’t mix ne w and old batteries or different types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to prev ent damage from leakage or corrosion. • Expired batteries should ...
13 Remote Controller —Continued Including the A V receiv er, the remote controller can be used to control up to sev en different components. The remote controller has a specific operating mode for use with each type of component. Modes are selected by using the six REMO TE MODE buttons. ■ RECEIVER/T APE Mode In RECEIVER/T APE mode, you can con ...
14 Remote Controller —Continued For detailed information, see the pages in parentheses. A ST ANDBY/ON button (36) Sets the A V receiv er to On or Standby . B INPUT SELECT OR buttons (42) Used to select the input sources. C MUL TI CH button (43) Selects the multichannel D VD input. D DIMMER button (49) Adjusts the display brightness. E Arro w [ ]/ ...
15 Remote Controller —Continued By default, the remote controller is set to control an Onkyo D VD player . A ST ANDBY/ON button Sets the D VD player to On or Standby . B Number buttons Used to enter title, chapter , and track numbers and times for locating specific points. C DISC +/– button Selects discs on a D VD changer . D T OP MENU button ...
16 Remote Controller —Continued By default, the remote controller is set to control an Onkyo CD player . In order to control an Onkyo MD recorder , CD recorder , or RI Dock, you must first enter the appropriate remote control code (see page 64). A ST ANDBY/ON button Sets the component to On or Standby . B Number buttons Used to enter track numbe ...
17 Speaker s For detailed information, see the pages in parentheses. A ST ANDBY/ON indicator Red: Subwoofer in standby mode Green: Subwoofer on W ith the Auto Standby function, the SKW -750 automatically turns on when an input signal is detected in Standby mode. When there’ s no input signal for a while, the SKW -750 automatically enters Standby ...
18 Connecting Y our Speakers Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just lik e being in a movie theater or concert hall. Y ou can enjoy D VDs featuring DTS and Dolby Digital. W ith analog and digital TV , you can enjoy Dolby Pro Logic II and Onkyo’ s own ...
19 Connecting Y our Speaker s —Continued Read the following before connecting your speak ers: •Y ou can connect speakers with an impedance of between 8 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high v olume lev els for a long period of time, the built-in amp pro- tection circuit may be activ ated. • Di ...
20 Connecting Y our Speaker s —Continued Use the center speaker base to mount the center speaker horizontally . If you place the speaker and its base on top of a TV or an entertainment center , adjust the angle of the speaker so that it faces to ward the listening position. The center speaker should be installed on the base securely . If the spea ...
21 Connecting Antennas This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially av ailable outdoor FM and AM antennas. The A V receiv er won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner . The supplied indoor FM antenna i ...
22 Connecting Antennas —Continued If you cannot achiev e good reception with the supplied indoor FM antenna, try a commercially av ailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obtained when installed in an attic or loft. •F or best results, install the outdoor FM an ...
23 Connecting Y our Components • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked all A V connections. Optical Digital Jacks The A V receiv er’ s optical digital jacks have shutter -type cov ers that open when an optical ...
24 Connecting Y our Components —Continued By connecting both the audio and video outputs of your D VD player and other A V components to the A V receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the A V receiv er. The A V receiv er supports several connection formats for compatibility with ...
25 Connecting Y our Components —Continued If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiv er to the A V receiver and use its tuner to listen to TV programs through the A V receiver (see pages 29 and 31). Connecting a TV or Projector Connection A V receiver Signal flow TV Picture quality COMPONE ...
26 Connecting Y our Components —Continued Connecting a D VD player Connection A V receiver Signal flow DVD pla yer Picture quality COMPONENT VIDEO D VD IN ⇐ Component video output Best D VD IN S ⇐ S-Video output Better D VD IN V ⇐ Composite video output Standard D VD IN FRONT ⇐ Analog audio L/R output DIGIT AL IN COAXIAL 1 ⇐ Digital co ...
27 Connecting Y our Components —Continued Hooking Up the Multichannel D VD Input If your D VD player supports multichannel audio formats such as DVD-Audio or SA CD, and it has a multichannel analog audio output, you can connect it to the A V receiv er’ s multichannel DVD input. Use a multichannel analog audio cable, or sev eral normal audio cab ...
28 Connecting Y our Components —Continued If you hav e an HDMI-compatible player, you can connect it to the A V receiver with an HDMI cable. Notes: • Audio and video signals receiv ed via the HDMI IN jacks are output only by the HDMI OUT . • Audio and video signals receiv ed via inputs other than the HDMI IN jacks are not output by the HDMI O ...
29 Connecting Y our Components —Continued W ith this hookup, you can use your VCR’ s tuner to listen to your fav orite TV programs via the A V receiv er, useful if your TV has no audio outputs. Connecting a VCR or D VD Recorder f or Playbac k Connection A V receiver Signal flow VCR or D VD recorder Picture quality COMPONENT VIDEO VCR/D VR IN ? ...
30 Connecting Y our Components —Continued Connecting a VCR or D VD Recorder f or Recording Connection A V receiver Signal flow VCR or DVD recor der Picture quality VCR/D VR OUT S ⇒ S-Video input Better VCR/D VR OUT V ⇒ Composite video input Standard VCR/D VR OUT L/R ⇒ Analog audio L/R input — Connecting a Camcorder , Games Console, or Ot ...
31 Connecting Y our Components —Continued W ith this hookup, you can use your satellite or cable receiver to listen to your f av orite TV programs via the A V receiv er, useful if your TV has no audio outputs. Connecting a Satellite, Cable, Set-top bo x, or Other Video Source Connection A V receiver Signal flow Video source Picture quality COMPO ...
32 Connecting Y our Components —Continued ■ CD Play er or T urntable (MM) with Built-in Phono Preamp •W ith connection , you can listen to and record audio from your CD player or turntable and listen via speaker set B. •T o connect the CD player digitally , use connection or . (For recording, use and , or and .) ■ T urntable (MM) with no ...
33 Connecting Y our Components —Continued ■ If Y our iP od Suppor ts Video: 1. Using the supplied A V cable, connect the RI Dock’ s A UDIO OUT L/R jacks to the A V receiv er’ s CBL/SA T IN L/R jacks. And connect the RI Dock’s VIDEO OUT jack to the A V receiv er’ s CBL/SA T IN V jack or a video input on your TV . 2. Using the supplied ca ...
34 Connecting Y our Components —Continued •W ith connection , you can listen via speaker set B. •T o connect the recorder digitally , use connections and , or and . Connecting a Cassette, CDR, MiniDisc, or D A T Recorder Connection A V receiver Signal flow Cassette/CDR/MD/D A T recorder T APE IN L/R T APE OUT L/R ⇐ ⇒ Analog audio L/R out ...
35 Connecting Y our Components —Continued W ith (Remote Interactive), you can use the follo wing special functions: ■ A uto P ower On/Standby When you start playback on a component connected via , if the A V receiv er is on Standby , it will automatically turn on and select that component as the input source. Similarly , when the A V receiver i ...
36 T urning On the A V Receiver MASTER VOLUME VIDEO STANDBY TONE DISPLAY STEREO DIMMER MEMORY DIGITAL INPUT TUNING MODE TUNER TAPE AUX CBL/SAT VCR/DVR DVD MULTI CH C D SETUP ENTER SETUP MIC RETURN CLEAR LISTENING MODE AUDIO LR AUX INPUT STANDBY/ON PHONES TUNING PRESET STANDBY/ON MUTING PREVIOUS MENU GUIDE TOP MENU SP A / B -- / --- T APE/AMP M D/CD ...
37 Fir st Time Setup This section explains the settings that you need to make before using the A V receiv er for the very first time. W ith the supplied speaker setup microphone, the Audyssey 2EQ function can measure the number of speakers con- nected, their sizes, crossov er frequencies, and distances from the listening position, and then calcula ...
38 First Time Setup —Continued Using A udyssey 2EQ Notes: • When the automatic speaker setup is complete, the Equalizer Settings (page 61) will be set to “ Audyssey . ” •Y ou can cancel the automatic speaker setup at any point in this procedure simply by disconnecting the setup microphone. 1 T urn on the A V receiver . 2 Put the speaker s ...
39 First Time Setup —Continued Error Messa g es While the automatic speaker setup is in progress, one of the following error messages may appear: Ambient noise is too high This message appears if there’ s too much background noise and the measurements cannot be performed prop- erly . Remove the source of the noise and try again. Speaker Detect ...
40 First Time Setup —Continued If you connect a video component to HDMI IN 1 or 2, use this setting to assign that input to an input selector . HDMI Video Setup MUTING PREVIOUS MENU GUIDE TOP MENU SP A / B SETUP RETURN PLAYLIST/CAT PLAYLIST/CAT RANDOM SUBTITLE PLAY MODE AUDIO REPEA T RC - 681 M -- / --- T APE/AMP M D/CDR DOCK CABLE ST ANDBY/ON DI ...
41 First Time Setup —Continued To enjoy Dolby Digital and DTS, you must connect your D VD player to the A V receiver digitally (coaxial or opti- cal). These are the default digital audio input assignments. Y ou can change the digital audio input assignments if necessary . For example, if you connect your D VD player to the OPTICAL 1 DIGIT AL IN ( ...
42 Pla ying Y our A V Components Basic A V Receiver Operation MASTER VOLUME VIDEO STANDBY TONE DISPLAY STEREO DIMMER MEMORY DIGITAL INPUT TUNING MODE TUNER TAPE AUX CBL/SAT VCR/DVR DVD MULTI CH C D SETUP ENTER SETUP MIC RETURN CLEAR LISTENING MODE AUDIO LR AUX INPUT STANDBY/ON PHONES TUNING PRESET DISPLAY MULTI CH 1 4 MUTING PREVIOUS MENU GUIDE TOP ...
43 Playing Y our A V Components —Continued The multichannel D VD input is for connecting a compo- nent with a 5.1-channel analog audio output, such as a D VD-Audio or SACD-capable D VD player , or an MPEG decoder . See page 27 for hookup information. Note: • While the multichannel D VD input is selected, the Speaker Configuration settings on p ...
44 Listening to the Radio W ith the built-in tuner , you can enjoy AM and FM radio stations. T uning into AM/FM Radio Stations ■ A uto T uning Mode ■ Manual T uning Mode The American model changes FM frequency in 0.2 MHz steps, 10 kHz steps for AM. For other models it’ s 0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for AM. When tuned int ...
45 Listening to the Radio —Continued ■ T uning into Stations by Frequenc y Y ou can tune into AM and FM stations directly by enter- ing the appropriate frequency . Y ou can store a combination of up to 40 of your favorite AM/FM radio stations as presets. ■ Selecting Presets ■ Deleting Presets 1 Press the [RECEIVER] button, follo wed by the ...
46 DS-A1X RI Doc k for the iP od W ith the Onkyo RI Dock, you can easily play the music stored on your Apple * iPod * through the A V receiver and enjoy great sound, and watch iPod slidesho ws and vid- eos on your TV . Y ou can use the A V receiv er’ s remote controller to operate your iPod. , which stands for Remote Interactiv e, is an exclusiv ...
47 DS-A1X RI Dock f or the iP od —Continued 1. Plug in the A C adapter . 2. T urn on the A V receiver, and select the appropriate inputs on the A V receiv er. 3. Align your iPod with the RI Dock’ s iPod slot, and carefully place your iPod in the slot, as shown. ■ Adjusting the iP od Adapter The iPod adapter needs to be adjusted to match your ...
48 DS-A1X RI Dock f or the iP od —Continued ■ Using Y our iP od’ s Alarm Clock Y ou can use your iPod’ s Alarm Clock function to auto- matically turn on your iPod and the A V receiv er at a specified time. The A V recei ver’ s input source will auto- matically be set to the input to which your iPod is con- nected. ■ Charging Y our iP o ...
49 Common Functions This section explains functions that can be used with an y input source. Y ou can adjust the brightness of the display . Y ou can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected. ■ Bass Y ou can boost or cut low-frequency sounds output by the front speakers from –10 dB to ...
50 Common Functions —Continued W ith the sleep timer, you can set the A V recei ver so that it turns off automatically after a specified period. To cancel the sleep timer , press the [SLEEP] button repeatedly until the SLEEP indicator disappears. To check the remaining sleep time, press the [SLEEP] b utton. Note that if you press the [SLEEP] b u ...
51 Using the Listening Modes F or a description of each listening mode, see “ About the Listening Modes” on page 52. Selecting on the A V Receiver ■ [STEREO] button This button selects the Stereo listening mode. ■ LISTENING MODE [ ]/[ ] buttons Pressing these buttons repeatedly c ycles through all of the listening modes that can be used wit ...
52 Using the Listening Modes —Continued The following table sho ws which listening modes can be used with each input signal format. The A V receiv er’ s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. Direct The selected input source is output directly with ...
53 Using the Listening Modes —Continued Dolby Pr o Logic II Movie Use this mode with D VDs and videos that bear the Dolby Surround logo or TV sho ws that feature Dolby Surround. Y ou can also use this mode with stereo movies or TV shows and the A V recei ver will create a 5.1 surround mix from the 2-channel stereo. Dolby Pr o Logic II Music Use t ...
54 Using the Listening Modes —Continued W ith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts ev en when listening at low volume lev els—ideal for watching movies late at night when you don’t w ant to disturb anyone. Notes: • The effect of the Late Night function dep ...
55 Using the Listening Modes —Continued The Audio Adjust settings are explained belo w . Input Channel Settings ■ Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output ( ...
56 Recor ding This section explains ho w to record the selected input source to a component with recording capability , and how to record audio and video from dif ferent sources. Y ou can only record to a component that’ s connected to the T APE OUT or VCR/D VR OUT jacks. See pages 23–35 for information on connecting your A V components. Notes: ...
57 Ad v anced Setup This section explains ho w to check the speaker settings and how to set them manually , which is useful if you change a speaker after performing the automatic speaker setup. Some speaker settings are set automatically by the Auto- matic Speaker Setup function (see page 37). Speaker Configuration This section explains ho w to sp ...
58 Adv anced Setup —Continued Crosso ver Frequency This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 57. To get the best bass performance from your speaker sys- tem, you need to set the crossov er frequency according to the size and frequency response of your speakers Notes: •F ...
59 Adv anced Setup —Continued Speaker Distance W ith these settings, you can specify the distance from each speaker to the listening position. Notes: • The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For e xample, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer dista ...
60 Adv anced Setup —Continued Speaker Levels Y ou can set the volume lev el of each speaker so that all speakers can be heard equally at the listening position. Notes: •A quick way to adjust the speak er lev els is to press the remote controller’ s [TEST T ONE] button to turn on the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adju ...
61 Adv anced Setup —Continued Equalizer Settings Here you can adjust the tone of individual speak ers. T o set the volume of indi vidual speakers, see page 60. Notes: • The front, center , and surround speakers can be adjusted at 80 Hz, 250 Hz, 800 Hz, 2500 Hz, and 8000 Hz. The subw oofer can be adjusted at 40 Hz, 80 Hz, and 160 Hz. • While t ...
62 Adv anced Setup —Continued The following table sho ws the display indicator for each digital signal format. Normally , the A V receiver detects the signal format auto- matically . Howev er, if you e xperience either of the fol- lowing issues when playing PCM or DTS material, you can specify the signal format as either PCM or DTS: • If the be ...
63 Contr olling Other Components Y ou can use the A V recei ver’ s remote controller (RC-681M) to control your other A V components, including those made by other manufacturers. This sec- tion explains ho w to enter the necessary remote control code for the component that you want to control (e.g., D VD player, TV , or VCR). To control another co ...
64 Controlling Other Components —Continued Onkyo components that are connected via are con- trolled by pointing the remote controller at the A V receiv er, not the component. This allows you to control components that are out of view , in a rack, for example. If you want to control an Onkyo component by pointing the remote controller directly at ...
65 Controlling Other Components —Continued To control another component, point the r emote controller at it and use the buttons explained below . (Y ou must select the appropriate r emote control mode first.) W ith some A V components, certain buttons may not work as expected, and some may not work at all. ■ Controlling a TV A [ST ANDBY/ON], T ...
66 Tr oubleshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. Can’t turn on the A V receiver • Make sure that the po wer cord is plugged into the wall outlet properly . • Unplug the power cord from the w all outlet, wait 5 seconds or more, then plug it in again. The A V receiver turns off as soon a ...
67 Tr oubleshooting —Continued The center speaker produces no sound • When the Stereo or Mono listening mode is selected, the center speaker produces no sound (page 52). • Make sure the speakers are configured correctly (page 57). The subwoof er produces no sound • When you play source material that contains no infor- mation in the LFE cha ...
68 Tr oubleshooting —Continued The remote controller doesn’t w ork • Make sure that the batteries are installed with the cor - rect polarity (page 12). • Make sure that the remote controller is not too far aw ay from the A V receiv er, and that there’ s no obstruction between the remote controller and the A V receiv er’ s remote control ...
69 Tr oubleshooting —Continued The functions don’t work •T o use , you must make an connection and an analog audio connection (RCA) between the compo- nent and A V receiv er, even if the y are connected digi- tally (page 35). During automatic speaker setup, measurement fails and the message “Noise Error!” appears • This can be caused by ...
70 Specifications AV Receiver (HT -R557) ■ Amplifier Section ■ Video Section ■ T uner Section ■ General Video Inputs Video Outputs Audio Inputs Audio Outputs RI Dock DS-A1X Specifications and features are subject to change without notice. Rated Output Power (FTC) All channels: 110 watts minimum continuous power per channel, 8 ohm loads, ...
71 Specifications —Continued 5.1ch Home Theater Speaker Pac kage (HTP-650) ■ Po wered Subwoofer (SKW -750) ■ Front Speaker (SKF-750F) ■ Center Speaker (SKC-750C) ■ Surround Speaker (SKM-750S) Specifications and appearance are subject to change without prior notice. T ype: Bass-reflex Input sensitivity/ impedance: 140 mV / 20 k Ω Maxi ...
SN 29344581 I0707-1 (C) Copyright 2007 ONKY O CORPORA TION Japan. All rights reser ved. http://www.onky o.com/ HOMEP AGE Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201 ...
Onkyo HT-SP904のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HT-SP904の取扱説明書
- Onkyoの製品カード
- パンフレット
- またはOnkyo HT-SP904の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Onkyo HT-SP904の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Onkyo HT-SP904の取り付け説明書、サービスマニュアル、簡易説明書、またはOnkyo HT-SP904のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Onkyo HT-SP904の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Onkyo HT-SP904デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがOnkyo HT-SP904を使用するのを助ける技術的文書のことです。説明書は通常、全てのOnkyo HT-SP904ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Onkyoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Onkyo HT-SP904の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははOnkyo HT-SP904の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Onkyo HT-SP904に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Onkyo HT-SP904デバイスの基本機能を使うにあたってのヒント。 Onkyo HT-SP904のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Onkyo HT-SP904に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるOnkyo HT-SP904のメーカー/サービスへの連絡先に関する情報。
Onkyo HT-SP904についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもOnkyo HT-SP904の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがOnkyo HT-SP904で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。