日本語 dropdown-ico

Altinex MT113-100の取扱説明書

24ページ 0.52 mb
ダウンロード

ページに移動 of 24

Summary
  • Altinex MT113-100 - page 1

    MULTITASKER ™ MANUAL PART NUMBER: 400 - 0209 - 002 3- IN MIXER 1 - OUT, + 15W STEREO AUDIO POWER AMPLIFIER CARD FOR MULTIT ASKER USER’S GUIDE MT 113 - 100 MT 113 - 101 MT113 - 100/101 ...

  • Altinex MT113-100 - page 2

    MULTITASKER ™ 400 - 0209 - 002 1 1 TA BLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS ............... 2 GENERAL .......................................................... 2 CLEANING ......................................................... 2 FCC / CE NOTICE .............................................. 2 ABOUT YOUR MT113 - 100/101 .......... ...

  • Altinex MT113-100 - page 3

    MULTITASKER ™ 400 - 0209 - 002 2 2 PRECA UTIONS / SA FETY WA RNINGS 1 Please read this manual carefully before using your MT113 - 100/101 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT113 - 100/101 and to prevent fire and shock hazard. Please read them carefully and heed all warning ...

  • Altinex MT113-100 - page 4

    MULTITASKER ™ 400 - 0209 - 002 3 3 AB OUT YOUR MT113 - 100/101 2 MT 113 - 100/101 3 in Mixer, 1 fixed line level output and 30W amplifier Card The MT113 - 100/101 is a Stereo Audio Power Amplifier Card de signed for use with the MultiTasker. This card allows the connection of up to two line level balanced/ unbalanced inputs and one microphone. Th ...

  • Altinex MT113-100 - page 5

    MULTITASKER ™ 400 - 0209 - 002 4 4 DESCRIPTION OF MT113 - 100/101 4 MT113 - 10 0 DESCRIPTION ...

  • Altinex MT113-100 - page 6

    MULTITASKER ™ 400 - 0209 - 002 5 5 MT113 - 101 DESCRIPTION ...

  • Altinex MT113-100 - page 7

    MULTITASKER ™ 400 - 0209 - 002 6 6 AP PLICA TION DIA GRA MS 5 DIA GRA M 1 : MT113 - 100 TYPICA L SETUP DIA GRA M 2 : MT113 - 101 TYPICA L SETUP ...

  • Altinex MT113-100 - page 8

    MULTITASKER ™ 400 - 0209 - 002 7 7 DIA GRA M 3 : MT 113 - 100 INTERNA L VIEW 70V X-FORMER CONTROL POWER SUPPLY S/W VOLUME BASS TREBLE GAIN MP OR ADJ FIX LINE OUTPUT + - OFF + - ON PHANTOM POWER ON OFF OFF OFF ON ON SW10 S/W GAIN SW1 POWER S/W SW2 GAIN M+ MIC SW5 M- SW4 M+ SW7 MIC SW9 MIC M+ M- SW6 M- SW8 PHANTOM LINE + - + OFF S/W GAIN INPUT2 MIC ...

  • Altinex MT113-100 - page 9

    MULTITASKER ™ 400 - 0209 - 002 8 8 DIA GRA M 4 : MT113 - 10 1 INTERNA L VIEW x POWER SUPPLY POWER PHANTOM CONTROL MP S/W VOLUME BASS TREBLE GAIN OR ADJ FIX LINE OUTPUT + - OFF + - ON PHANTOM POWER ON OFF OFF OFF ON ON SW10 S/W GAIN SW1 S/W SW2 GAIN M+ MIC SW5 M- SW4 M+ SW7 MIC SW9 MIC M+ M- SW6 M- SW8 LINE + - + OFF S/W GAIN INPUT2 MIC - ON LINE ...

  • Altinex MT113-100 - page 10

    MULTITASKER ™ 400 - 0209 - 002 9 9 INSTA LLING YOUR MT113 - 100/101 6 Step 1. Turn off power to the MultiTasker enclosure. Step 2. Slide the MT113 - 100/101 into an available slot in the MultiTasker Enclos ure in order to connect to the bus. Make sure that the MT113 - 100/101 card fits into place. Step 3. Secure the card to the MultiTasker by tig ...

  • Altinex MT113-100 - page 11

    MULTITASKER ™ 400 - 0209 - 002 10 10 Command Format: [VERCnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: An MT113 - 100/101 card is in slot #4. Send the command [VERC4], and the MultiT asker Enclosure will return the following feedback: [ MT 113 - 10 0 690 - 0133 - 00 9 C04] MT 1 13 - 10 0 = the card ...

  • Altinex MT113-100 - page 12

    MULTITASKER ™ 400 - 0209 - 002 11 11 690 - 0122 - 015 = Version 015 or later. 690 - 0123 - 004 = Version 004 or later. 690 - 0124 - 018 = Version 018 or later. NOTE: In MTSetup™, send the command [VER] from the Terminal W indow. The system will respond with feedback similar to the following: [690 - 0122 - 015 690 - 0123 - 004 690 - 0124 - 018] ...

  • Altinex MT113-100 - page 13

    MULTITASKER ™ 400 - 0209 - 002 12 12 Example: Select the Output Volume command for the card in slot #4. The current Output Volume level is 10, but it is not the optimal value. After sending the following commands, an optimum volume level of 15 is obtained: 1. [SELOC4] The c urrent volume level is 10. 2. [ – ] [ – ] [ – ] The level is now 7 ...

  • Altinex MT113-100 - page 14

    MULTITASKER ™ 400 - 0209 - 002 13 13 Command Format: [VLOAmCnUi] m = Volume Level (m = # from 0 to 16) Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Set the output volume to 16 for the MT113 - 100/101 in slot #4 . Send the command [VLOA16C4]. 15. [VLI] This command sets an INPUT volume to an absolute leve ...

  • Altinex MT113-100 - page 15

    MULTITASKER ™ 400 - 0209 - 002 14 14 Example: Turn on the speaker ports of the MT113 - 100/101 in slot #4 by sending the command [ MUT0 C4]. 21. [MUT1] This command dis ables the speaker output . It does not affect the fixed output. Command Format: [ MUT1 CnUi] Cn = Card ID (n = slot # from 1 to ma x slots) Ui = Unit ID (i = # from 0 to 9) Exampl ...

  • Altinex MT113-100 - page 16

    MULTITASKER ™ 400 - 0209 - 002 15 15 Command Format: [RUP=xxCnUi] xx = Stop Level (xx = # from 01 - 16) Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Ramp the output volume from a starting level of 1 up to 10. Send the command [RUP=10C8] and receive the following feedback: [02][03][04]… [10] 25. [RDN] This c ...

  • Altinex MT113-100 - page 17

    MULTITASKER ™ 400 - 0209 - 002 16 16 Example: There is an MT113 - 100/101 in slot #5. Send the command [RAMP=16C5] to set the ramp rate to 16 seconds. After this is set, any ramping will occur at a rate of 16 steps in 16 seconds, or 1 second per step. Confirm the setting by sending the command [RAMPC5] and receiving the feedback: RAMPTIME = 16 SE ...

  • Altinex MT113-100 - page 18

    MULTITASKER ™ 400 - 0209 - 002 17 17 32. [RSI] This command resets the card ID's in the system. After sending this command, each card ID in the system will match the slot number of the card. Use this command along with the SID commands that follow. The [RSI] command MUST b e used prior to changing Card ID's once they have already been s ...

  • Altinex MT113-100 - page 19

    MULTITASKER ™ 400 - 0209 - 002 18 18 3 7. [HELP] This command displays information available for the MultiT asker interface commands. Command Format: [HELPCnUi] Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: In order to display the RS - 232 commands available for the MT113 - 100/101 card in slot #2, send the co ...

  • Altinex MT113-100 - page 20

    MULTITASKER ™ 400 - 0209 - 002 19 19 REMOVE ALL GROUPS Remove all the members from every group, effectively deleting all groups. Command Format: [RMG * Ui] Ui = Unit ID (i = # from 0 - 9) Example: Group 1 consists of cards 1 and 2. Group 2 consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG * ]. The system will r ...

  • Altinex MT113-100 - page 21

    MULTITASKER ™ 400 - 0209 - 002 20 20 22) [CLR] Reset card to default values 23) [RUP] Ramp volume UP to max (16) 24) [RUP=] Ramp volume UP to a value 25) [RDN] Ramp volume DOWN to min (1) 26) [RDN=] Ramp volume DOWN to a value 27) [RST] Stop ramping 28) [RA MP] Display ramp rate 2 9) [RA MP=] Set ramp rate 30) [TEST] Test internal memory IC' ...

  • Altinex MT113-100 - page 22

    MULTITASKER ™ 400 - 0209 - 002 21 21 7.4.2 USING MENU MODE SUGGESTION: Before using the menu mode, it is best to disable the automatic feedback feature. The val ues and current settings will be displayed in the menu mode, but the automatic feature will display after each setting change making the menus difficult to read. 1. In order to enter menu ...

  • Altinex MT113-100 - page 23

    MULTITASKER ™ 400 - 0209 - 002 22 22 2. Set Input 3 Volume Starting from the Main Menu, set Input 3 volume level to 16. Follow the keystrokes below. 2 Select SETUP Menu 2 Select Set Input Volume 3 Select Input 3 Volume 16 Enter 16 NOTE The system may echo the 1 and the 6 entries, depending on the settings. ESC Return to SETUP ESC Return to the MA ...

  • Altinex MT113-100 - page 24

    MULTITASKER ™ 400 - 0209 - 002 23 23 Cause 2: The card settings are w rong . Solution: Verify the card volume settings are at ma ximum and that mute is off. (See section 7 ) . If no sound is present, see Cause 3. Cause 3: Cable connections are incorrect. Solution: Make sure the cables are connected properly and that the continuity and wiring are ...

メーカー Altinex カテゴリー Stereo Amplifier

Altinex MT113-100のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MT113-100の取扱説明書
- Altinexの製品カード
- パンフレット
- またはAltinex MT113-100の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Altinex MT113-100の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Altinex MT113-100の取り付け説明書、サービスマニュアル、簡易説明書、またはAltinex MT113-100のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Altinex MT113-100の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Altinex MT113-100デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAltinex MT113-100を使用するのを助ける技術的文書のことです。説明書は通常、全てのAltinex MT113-100ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Altinexの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Altinex MT113-100の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAltinex MT113-100の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Altinex MT113-100に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Altinex MT113-100デバイスの基本機能を使うにあたってのヒント。 Altinex MT113-100のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Altinex MT113-100に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAltinex MT113-100のメーカー/サービスへの連絡先に関する情報。

Altinex MT113-100についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもAltinex MT113-100の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAltinex MT113-100で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)