-
iso-9001 Wireless Bridge - page 1
2-Port W ir eless Bridge/AP with Print Server User Guide FCC Interference Statement This equipment has been tested and foun d to comply w ith the limits for a Class B digital device pursu ant to Part 15 of the FCC Ru les. These li mi ts are desig ned to provide reasonable prot ection against radio in terference in a com mercial envi ronmen t. T his ...
-
iso-9001 Wireless Bridge - page 2
FCC Interference Statement This equipment has been tested and foun d to comply w ith the limits for a Class B digital device pursu ant to Part 15 of the FCC Ru les. These li mi ts are desig ned to provide reasonable prot ection against radio in terference in a com mercial envi ronmen t. T his equipm ent can generate, us e and radiate radio frequenc ...
-
iso-9001 Wireless Bridge - page 3
Contents CHAPTER 1 IN TRODUCTION ........................................................................ 1 1.1 Functions and Features ............................................................................................ 1 1.2 Packing List ....................................................................................................... ...
-
iso-9001 Wireless Bridge - page 4
Chapter 1 Introduction Congratulations that y ou purchase an outst anding Wireless Bridge. This product is a transceiver that connects t wo or more remo te network into a single L AN and can act as a center point of a standalone wireless network or as the connection point between wireless and wired network. Th is product can also be used as a rugg ...
-
iso-9001 Wireless Bridge - page 5
• DHCP se rver suppor ted All of the networke d computers can retrieve TCP/I P settings automatic ally from this product. • Web-based c onfiguring Configurable through any netw orked computer’s web browser. • MAC Addr ess Acc ess Contr ol supported Allows you to assign different access right for different users. • Firmware Upgradable Prov ...
-
iso-9001 Wireless Bridge - page 6
Chapter 2 Hardwa re Installation 2.1 Panel Layout 2.1.1 Fr ont Panel Figure 2-1 Front Panel LED: LED Function Color S tat us Description POWER P ow er indication Green On Power is being applied to this product. M1 System status 1 Orange Blinking Thi s prod uct is func tioning properly . WLAN W ireless activity Green Blinking Sending or receiv ing d ...
-
iso-9001 Wireless Bridge - page 7
2.1.2 R ear Panel Figure 2-2 Rear Panel Port Description 12VDC Power inlet: DC 12V , 1.5A (minim um) Port 1-2 The ports where y ou w ill connect netw o rked compu ters and other devices . PRINTER Printer Port (Optio nal) Antenna Connect w ith antenn a (Omni- directional or Directional) 2.2 Pr ocedure of Hardware Installation 1. Decide how to place ...
-
iso-9001 Wireless Bridge - page 8
Figure 2-3 Setup of L AN connections for this product Note: If an UPLINK port is not available, sim ply connect a cross-over Ethernet cab le from the AP to the switch/h ub. 4. Connect this Product to the Printer Use the printer cable to connect the prin ter to the printer port of this product. (Optional) 5. Power Connect the power code to the power ...
-
iso-9001 Wireless Bridge - page 9
Chapter 3 General Configuration 3.1 Log in and S tart up This product provides a we b based configuration sc heme, make possible to configure by web browser such as Nets cape Communicator or Internet Explorer. 1. Start the web browser, and disable the proxy or add the IP address of this product into the exce ptions of Proxy setting . Then, ty pe th ...
-
iso-9001 Wireless Bridge - page 10
When this device is prin ting, there may appear a “ Kill Job ” button on the Sidenote column. You can click this button to c ancel the c urrent printing job manually. 3.3 T ool Box This option enables y ou to change the administrator password. There are some useful buttons in this page: View Log View t he sy stem logs Reboot Reboot this device ...
-
iso-9001 Wireless Bridge - page 11
3.4 Prim ary Setup Figure 3.3 This option is primary to enable this product to work properly. 1.IP Address : the IP address of this device. 2.Mode : the operating mode of this device. Th e default mode is “Bridge”, which is the normal oper ation mode of a B ridge. Users can chang e it to the “AP” mode if y ou want this product to work as a ...
-
iso-9001 Wireless Bridge - page 12
5. WEP Security : Se lect the data pr ivacy algorithm you want. Enabling the security can protect your data while it is transf erred from one station to anot her. The standardized IEEE 802.11 WEP (64-bit or 128-bit) is used here. 6. WEP Key 1, 2, 3 & 4 : A fter enable the 64-bit or 128-bit WEP key security, please select one WEP key to be used ...
-
iso-9001 Wireless Bridge - page 13
Association control Check "A ssociation control" to enable the controlling of which wireless cli ent can associate to the wirel ess LAN. I f a client is denied to associate to the wirel ess LAN, it means the client can't send or receive any data via this device. Choose "allow" or " deny " to allow or deny the clie ...
-
iso-9001 Wireless Bridge - page 14
Chapter 4 Configure as a Bridge Two of these device s have capab ility to communicate with each other when the se two devices are working in the “Bri dge” M ode. Users can connect two or more wired LANs tog ether via wireless connection with wireless bridge function. The connection is as follows: Figure 4.1 Note: This device can’t be a wirele ...
-
iso-9001 Wireless Bridge - page 15
4.2 Cr eate a Bridge Network Envir onment The bridge supports external antennas with omni-directiona l or directional capabilities. Omni- directional a ntennas are suited for sy stems requiring a signal distribution in more than one direction. Hi gh-gain directional an tennas are best suited for longer coverage rang e in a fix ed direction. Due to ...
-
iso-9001 Wireless Bridge - page 16
Chapter 5 DHCP Server Dy namic Host Configurati on Protocol (DHCP) is a TCP/IP standard for simplify i ng manag ement of host IP configuration. The DHCP standard provides for the use of DHCP servers as a way to manage dy namic allocation of I P. Every computer on a TCP/IP network must have a unique computer name and IP address. The IP address (tog ...
-
iso-9001 Wireless Bridge - page 17
Fixed Mapping I n general, DHCP server a ssigns an I P address chosen from the I P addresses pool randomly . Fixe d Mapping allows you to assign a specific I P address to the specified MAC address. 14 ...
-
iso-9001 Wireless Bridge - page 18
Chapter 6 Print Server This product provides the function o f network print server for MS W indows 95/98/NT/2000/XP , Linux and Unix based platforms. 6.1 Configuring on Windows 95/98/ME Platform s After finished the software installa ti on procedure described in Chapter 7, the computer has ability to print via this pr oduct. For convenience, we cal ...
-
iso-9001 Wireless Bridge - page 19
3. Select t he Details item. 4. Choose the “PRTmate: (All-in-1)” from the list attached at the Print To the following port item. Ensure that the Print using the following driver item is configured to the correct driver of this printer server . 5. Click Port Settings . Ty pe the I P address of th is product and then click the OK button. 6. Make ...
-
iso-9001 Wireless Bridge - page 20
6.2 Configuring on Windows 2000/XP Platforms The configuration procedure for a Windows 2000/XP platform is similar to that of Windows 95/98/ME except of the printer Properties . Compare to the procedure for the settin g of windows 95/98/ME, the selection of Details (windows 95/98/ME) is equivalent to the selection of Ports (windows 2000/XP) , and P ...
-
iso-9001 Wireless Bridge - page 21
Chapter 7 Software Installation 1. I nsert the installation CD- ROM into the CD-ROM device. The f ollowing window will be shown automatica lly . If it isn’t, please run “ install.e xe ” in the CD-ROM. 2. Click the INSTALL button. W ait until the following Welcome dialogue appears, and click the Next button. 18 ...
-
iso-9001 Wireless Bridge - page 22
3. Select the de stinati on folder and click the Next button. Then, the setup progra m will begin to install this prog ram into the computer. 4. When the following window is display ed, click the Finish button. 5. Select the ite m to restart the computer and the n click the OK button to reboot y our computer. 19 ...
-
iso-9001 Wireless Bridge - page 23
6. After rebooting y our computer, you can configure this device (refer to Chapter 4) and setup the Print Serv er (refer to Chapter 6). 20 ...
-
iso-9001 Wireless Bridge - page 24
Appendix A TCP/IP Config uration for Wir eless Windows 95/98/ME/2000/X P This chapter will introduce how to insta ll the TCP/I P protocol in the personal computer and using the TCP/I P settin g to connect this device correctly. A.1 Configure Windows 95/98/ME Platform s for w ork ing with this device 1. Connect this device to a comput er by general ...
-
iso-9001 Wireless Bridge - page 25
Network Pr otocols list. Click OK button to return to Network window . 7. The TCP/IP protocol shall be listed in the Network window . Click OK to complete the install procedur e and restart y ou r PC to enable the TCP/IP protocol. 8. After rebooting, click St art button and choose Settings , then c lick Contr ol Panel . 9. Double click Network icon ...
-
iso-9001 Wireless Bridge - page 26
this product is 192.168.123.254. So please use 192.168.123.xxx (xxx is between 1 and 253) for IP Addr ess field and 255.255.255.0 for Subnet Mask field. 12. I n the Gateway and DNS tab, do not put anything . 13. Click OK button to finish the TCP/ I P setting and restart the computer . 23 ...
-
iso-9001 Wireless Bridge - page 27
A.2 Configure Windows 2000/XP P latforms for working with this device 1. After complete inst allation the windows 2000/XP, the sy stem will automatically install the TCP/IP protocol. 2. Connect this device to a comput er by general network cable. 3. On the Windows 2000/XP platform, right click My Network Places on the desktop then select Properties ...
-
iso-9001 Wireless Bridge - page 28
5. I n the General tab, choose Internet Protocol (TCP/IP) and click the properties button. 6. I n the General tab, select Use the following IP address and set a IP address which is in the same subnet with this product(default is 192.168.123.254). 7. Do not put any t hing in the Default gateway and DNS field. 8. Click the OK button to complete TCP/I ...
iso-9001 Wireless Bridgeについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもiso-9001 Wireless Bridgeの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがiso-9001 Wireless Bridgeで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。