-
Planet Technology GSD-1020 - page 1
10/100/1000Mbps Gigabit / Fast Ethernet Switch GSD-1020 User’s Manual ...
-
Planet Technology GSD-1020 - page 2
Trademarks Copyright PLANET Technology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware w ill wo rk properly in all env ironments and applications, and ...
-
Planet Technology GSD-1020 - page 3
TABLE OF CONTENTS 1. INTRODUCTION ................................................................................................................ ...........1 1.1 C HECKLIST ..................................................................................................................................................1 1.2 A BOUT THE S WIT CH ... ...
-
Planet Technology GSD-1020 - page 4
- 1 - 1. INTRODUCTION 1.1 Checklist Check the contents of your package for following parts: GSD-1020 User's manual Power cord If any of these pieces are missing or damaged, please cont act your dealer immediately, if possible, retain the carton including the original packing material, and us e them against to repack the product in ...
-
Planet Technology GSD-1020 - page 5
- 2 - 2. HARDWARE DESCRIPTION This section describes the hardware features of t he Giga Switch. For easier management and control of the switch, familiarize yourself with its display indicators , and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting any network device to the Switch, read this chapte ...
-
Planet Technology GSD-1020 - page 6
- 3 - 1000Base-T 2.2 Rear Panel The rear panel of the Switch indicates an AC inlet power socket which accepts input power from 100 to 240VAC, 50-60Hz. Figure 2: GSD-1020 Sw itch rear panel Power Notice: 1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consid ...
-
Planet Technology GSD-1020 - page 7
- 4 - 3. INSTALLATION 3.1 Before start up Before your installation, please refer to the followings for your cabling: 100Base-TX All 100Base-TX ports come with auto-negotiation c apability. They automatica lly support 100Base-TX and 10Base-T networks. Users only need to plug a working network device into one of the 100Base-TX ports, then turn on the ...
-
Planet Technology GSD-1020 - page 8
- 5 - Figure 3. End node, Hub or Switch connection Notice: Cable distance for Sw itch The cable distance between Ethernet Switch and hub/PC should not exceed 100 meter for UTP/STP cable. Make sure the w iring is correct It can be used Category 3/4/5 cable in 10 Mbps oper ation. To reliably operate your network at 100Mbps and 1000Mbps, you must use ...
-
Planet Technology GSD-1020 - page 9
- 6 - 4. SWITCH OPERATION Address Table The Giga Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of so me node in network, including MAC address, port no, etc. This information comes from the l earning process of Ethernet Switch. Learning When one packet c ...
-
Planet Technology GSD-1020 - page 10
- 7 - 5. TROUBLESHOOTING This chapter contains information to help you solve pr oblems. If Giga Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remove duplex mode of the Giga Switch Some stations can not talk to ot ...
-
Planet Technology GSD-1020 - page 11
- 8 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps / 1000BaseT Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- Implicit implementation of the crosso ver function within a twisted-pair cable, or at a wiring panel, while ...
-
Planet Technology GSD-1020 - page 12
- 9 - APPENDIX B TECHNICAL SPECIFICATIONS GSD-1020 10/100/1000Mbps Gigabit Fast Ethernet Switch Hardw are Specification Ports Eight 10/ 100Base-TX , two 1000B ase-T RJ-45 Auto-MDI/MDI-X ports Switch Fabric 5.6Gbps Switch Processing Scheme Store-and-forward Throughput (packet per second) 4.16Mpps Address Table 8K entries Queue Buffer 128Kbytes Flow ...
Planet Technology GSD-1020についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPlanet Technology GSD-1020の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPlanet Technology GSD-1020で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。