日本語 dropdown-ico

Sanyo VCC-6570Pの取扱説明書

20ページ 0.3 mb
ダウンロード

ページに移動 of 20

Summary
  • Sanyo VCC-6570P - page 1

    INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS VCC-6570P COLOUR CCD camera CCD-Farbkamera Caméra CCD COULEUR CCD About this manual Befor e ins tal ling and u sing the c amera, pleas e rea d thi s manual carefully. Be sure to keep it handy for later reference. Über diese Bedienungsanleitung Lesen Sie bit te vor der M ontage und dem ...

  • Sanyo VCC-6570P - page 2

    Depen ding on the conditions of use, inst allation a nd envir onment, please be sure to ma ke t he appropri ate setting s and adjustm ents. I f you need hel p with install ation and/ or settings , please con sult your deale r. CONTENTS PRECAUTIONS ........................................................................................ 2 PARTS NAMES ...

  • Sanyo VCC-6570P - page 3

    PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For ...

  • Sanyo VCC-6570P - page 4

    PARTS NAMES 1 Power indicator (POWER) Comes on when the power to the camera is on. 2 Video output connector (VIDEO OUT: BNC type) Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 3 AC power cord 4 External sync composite video signal input connector (VBS IN: BNC type) Connect to this connector the synchronizing ...

  • Sanyo VCC-6570P - page 5

    PARTS NAMES 7 Lens mount cap The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). 8 Flange-back adjustment screw (FLANGE BACK ADJ.) 9 Flange-back lock screw (FLANGE BACK LOCK) F Camera installation bracket The bracket can be fixed at the top or bottom of the camera. When fixin ...

  • Sanyo VCC-6570P - page 6

    PARTS NAMES G Lens iris output connector (LENS) This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens. H Camera setup section (under the cover) These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However, if due to installation conditions or environment ...

  • Sanyo VCC-6570P - page 7

    CONCERNING AUTO-IRIS LENSES DC type auto-iris lens A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is referred to as DC type coil lens or DC type non-amplifier lens. (Set the A.I. LENS switch to the DC position.) VIDEO type auto-iris lens A lens with amplifier circuit that operates on video si ...

  • Sanyo VCC-6570P - page 8

    MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). Check the lens mount Do not use a lens if the length “ L ” is more than 5 mm. That may damage the camera and prevent proper installation. 1 Remove the lens mount cap from the camera. 2 Install the auto-iris lens. CS mount type lens Carefully align the lens mount with the c ...

  • Sanyo VCC-6570P - page 9

    MOUNTING THE LENS Rewiring the lens cable in the lens iris plug 1 Prepare the lens cable. Cut th e c able at the plug, then remo ve appro x. 8 mm of the c able sheath a nd strip abou t 2 mm from e ach wire. 2 Install the lens iris plug. Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close ...

  • Sanyo VCC-6570P - page 10

    CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 When using this unit, the supplied clamping core A and B must be installed on the power cord and BNC cable, in order to ...

  • Sanyo VCC-6570P - page 11

    CONNECTIONS Connections to the camera Y/C OUT connector The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 1 Using a coaxial cable (twin type, 75 ohms), connect the Y/C OUT connector from the camera to the S-VIDEO input terminal on the monitor or time lapse VCR. 2 When using this unit, the supplied clamping core A and ...

  • Sanyo VCC-6570P - page 12

    SETTINGS The illustration shows the factory default settings for the switches in the camera setup section. The camera settings are described on the assumption that a DC type auto iris lens is being used. If you are using a VIDEO type auto iris lens, be sure to read the Note which is given. Control name Position 1 High speed electronic shutter setti ...

  • Sanyo VCC-6570P - page 13

    SETTINGS High speed electronic shutter setting Normally, the speed setting switches for the high speed electronic shutter are all set to the down ( OFF ) position. This sets the electronic shutter speed to 1/50 sec. The switches can be set as indicated in table A to select one of the 8 speeds available. CAUTION: • When using the high speed electr ...

  • Sanyo VCC-6570P - page 14

    SETTINGS Backlight compensation setting This camera has two different backlight compensation functions: Normally backlight compensation switch 6 ( MULT ) and 7 ( CENT ) are set to the down ( OFF ) position. Change the backlight compensation switch settings depending on the conditions. • MULT mode: Use this position when applying backlight compens ...

  • Sanyo VCC-6570P - page 15

    SETTINGS White balance adjustment Normally the switch 8 ( WB ) is set to the down ( ATW : auto white balance) position and the white balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below. Set the switch 8 ( WB ) to the up ( M : manual) position, then adjust the colour. • Turn RED (VR302) to s ...

  • Sanyo VCC-6570P - page 16

    SETTINGS External sync adjustment (VBS) 1 Connect the VBS signal output for the other camera to the VBS IN connector at the rear of this camera. 2 If the signals are not synchronized, change the sub-carrier (SC-P1) switches as follows. Setting 9-pin 10-pin Default OFF (down) OFF Set to 90˚ counterclockwise OFF ON (up) Set to 180˚ counterclockwise ...

  • Sanyo VCC-6570P - page 17

    TROUBLESHOOTING Bef ore taking the camera for repair s, please check below to make sure that the ca mera is used c orrectly . If it still do es not p e rform corre ctly, pl e a se con sult your de aler or a S a nyo Author ized Serv ice Cen tre. No picture on the monitor screen • I s the power t urned on to all connecte d devices ? Is th e voltage ...

  • Sanyo VCC-6570P - page 18

    SPECIFICATIONS Camera: Scanning system : PAL standard (625 TV lines, 25 frames/sec.) Interlace : PLL 2:1 interlace Image device : 1/3 inch solid state image device CCD Picture elements : 795 (H) x 596 (V) Effective picture elements : 752 (H) x 582 (V) Synchronizing system : Internal sync, Line lock manually switchable, External sync Resolution : 52 ...

  • Sanyo VCC-6570P - page 19

    SPECIFICATIONS Dimensions Features and specifications are subject to change without prior notice or obligations. 12 22 11 1.3 136 128 1/4”–20 UNC 67 54 28 L53T5/ XE GB 2001, 7, 26 18 English ...

  • Sanyo VCC-6570P - page 20

    1AC6P1P2453-- L53T5/XE (0801KPS-DSP) Sanyo Electric Co, Ltd. Printed in Japan L53T 5/XE G B 2001 , 7 , 26 ...

メーカー Sanyo カテゴリー Camcorder

Sanyo VCC-6570Pのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VCC-6570Pの取扱説明書
- Sanyoの製品カード
- パンフレット
- またはSanyo VCC-6570Pの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Sanyo VCC-6570Pの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Sanyo VCC-6570Pの取り付け説明書、サービスマニュアル、簡易説明書、またはSanyo VCC-6570Pのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Sanyo VCC-6570Pの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Sanyo VCC-6570Pデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSanyo VCC-6570Pを使用するのを助ける技術的文書のことです。説明書は通常、全てのSanyo VCC-6570Pユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Sanyoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Sanyo VCC-6570Pの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSanyo VCC-6570Pの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Sanyo VCC-6570Pに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Sanyo VCC-6570Pデバイスの基本機能を使うにあたってのヒント。 Sanyo VCC-6570Pのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Sanyo VCC-6570Pに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSanyo VCC-6570Pのメーカー/サービスへの連絡先に関する情報。

Sanyo VCC-6570Pについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもSanyo VCC-6570Pの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSanyo VCC-6570Pで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)