Speedotron D1604の取扱説明書

17ページ 0.63 mb
ダウンロード

ページに移動 of 17

Summary
  • Speedotron D1604 - page 1

    INS TRUCT ION MANUAL FOR SPEEDO TRON BROWN LINE EQUIPMENT  ...

  • Speedotron D1604 - page 2

    2 3 T ABLE OF C ONTENT S Power Supplies General Information – Read This First . . . . . . . . . . . . . . . . . . . 4 Models D604, D1204, D1604 Description of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Power Distribution Tables . . . . . ...

  • Speedotron D1604 - page 3

    4 5 Speedotron power supplies are equipped with arc-protected outlets. However, as with any electrical equipment, arc-over (an electrical discharge between two physically dis- connected electrical terminals) is a possibility. When light cables, flash tubes or power cords are improperly seated, arc-over may occur. Also, if your light unit or power s ...

  • Speedotron D1604 - page 4

    6 7 OPERA TING INS TRUC TIONS Operation of the D604, D1204 and D1604 power supplies is simple and straight for- ward. This sequence of operation is suggested for maximum life and dependability. Make sure that the Model and Power switches are in the off position and the Push to Reset button is fully depressed into its socket. Connect light head cabl ...

  • Speedotron D1604 - page 5

    8 9 One light: Symmetrical mode in any outlet, will receive 600Ws. Asymmetrical mode in outlets 1 or 2, will receive 600Ws; when using outlets 3 or 4 output is 450Ws. Two lights: Symmetrical mode, all outlets share an equal amount of power. Two lights each receive 300Ws (600Ws divided by 2). Asymmetrical mode Combination 1: one light in outlet 1 or ...

  • Speedotron D1604 - page 6

    10 11 One light: Symmetrical mode in any outlet will, receive 1600Ws. Asymmetrical mode in outlets 1 or 2, will receive 1600Ws; when using outlets 3 or 4 output is 1200Ws. Two lights: Symmetrical mode, all outlets share an equal amount of power. Two lights each receive 800Ws (1600Ws divided by 2). Asymmetrical mode Combination 1: one light in outle ...

  • Speedotron D1604 - page 7

    12 13 D1204 Power Supply Maximum power: . . . . . . . . . . . . . . . . . . . . .1200Ws Number of light unit outlets: . . . . . . . . . . . .4 Recycle time: watt-seconds seconds (to 85% voltage, ANSI standard) 1200 4.1 600 2.0 300 1.0 Flash duration : . . . . . . . . . . . . . . . . . . . . . . .1/370 sec. (2.7 milliseconds) (at full power w/one M1 ...

  • Speedotron D1604 - page 8

    14 15 *New MW9H flashtubes supplied with M11 light units handle up to 1200Ws. The MW9M flashtubes have a maximum capacity of 1000Ws. OPERA TING INS TRUC TIONS Operation of Brown Line power supplies is simple and straight forward. It is suggest- ed that this sequence of operation be utilized for maximum life and dependability. Make sure that the Mod ...

  • Speedotron D1604 - page 9

    16 17 One light: Symmetrical mode in any outlet, will receive 800Ws. Asymmetrical mode in outlets 1 or 2, will receive 800Ws; when using outlets 3 or 4 output is 600Ws. Two lights: Symmetrical mode, all outlets share an equal amount of power. Two lights each receive 400Ws (800Ws divided by 2). Asymmetrical mode Combination 1: one light in outlet 1 ...

  • Speedotron D1604 - page 10

    18 19 DESCRIPTION OF C ONTROL S Power – turns power supply on and off. (Flashes light units when turning off.) Model – turns model lamps on and off. Symmetrical/Asymmetrical – controls power distribution. In the symmetrical position, power is split equally between all lights. In the asymmetrical position power is distributed unequally and the ...

  • Speedotron D1604 - page 11

    20 21 200 100 50 150 TE CHNICAL SPE CIFICA TIONS D202 Power Supply Maximum power: . . . . . . . . . . . . . . . . . . . . .200Ws Number of light unit outlets: . . . . . . . . . . . .2 Recycle time: watt-seconds seconds (to 85% voltage, ANSI standard) 200 3.25 Flash duration . . . . . . . . . . . . . . . . . . . . . . . .1/1200 sec. (.85 millisecond ...

  • Speedotron D1604 - page 12

    22 23 To connect light units, align the light unit plug with the power supply outlet and apply even pressure while pushing. Black colored light unit connectors are of the “ quick release ” type that only require pushing the connector firmly until it is fully seated. Silvery colored light unit connectors must be threaded until they are fully sea ...

  • Speedotron D1604 - page 13

    24 25 T echnical Specifications Maximum power: MW3 (for MW3R, MW3U, M90) . . . . . . . . . . . . . .400Ws MW3C (for MW3R/CC, MW3U/CC, M90/CC) . . .400Ws MW3Q (for MW3UQ, M90Q) . . . . . . . . . . . . . . . .1200Ws MW3QC (for MW3UQ/CC, M90Q/CC) . . . . . . . .1200Ws Flash duration (MW3 and MW3C): at 400Ws . . . . . . . . . . . . . . . . . . . . . . ...

  • Speedotron D1604 - page 14

    26 27 UNIVERSAL LIGHT UNIT S (REMO V ABLE REFLE CT ORS) M11, M11/CC, M11Q and M11Q/CC The M11 series universal light units share a common base, but are differentiated by the type of flash tube each contains. They are supplied with a removable 11-1/2" reflector when purchased individually or include a 7" umbrella reflector when purchased i ...

  • Speedotron D1604 - page 15

    28 29 TROUBLE-SHOO TING System will not work at all; no flash. Check that sync cable, AC power cord and light unit cables are firmly and properly attached. Check that the flash tube is firmly seated. Check that Power switch is on. With metal camera bodies, you may be required to polarize the camera sync cable and the power supply sync extension in ...

  • Speedotron D1604 - page 16

    30 31 Ws per flash tube MW3-1 MW3Q MW9H MW9Q 100Ws 1/1500 1/1500 1/3000 1/3000 200Ws 1/1200 1/1200 1/2200 1/2200 400Ws 1/750 1/750 1/1400 1/1400 600Ws - 1/580 1/1000 1/1000 800Ws - 1/450 1/700 1/700 1200Ws - 1/330 1/500 1/500 1600Ws - - - 1/400 FLASH DURA TION Flash duration of a Speedotron Brown Line system will vary with the type of flash tube, t ...

  • Speedotron D1604 - page 17

    © 1997 Speedotron Corporation SPEEDO TRON’S LIMITED W A RRANTY Speedotron guarantees to repair or replace, free of charge, any part or parts (except for flash tubes and modeling lamps) found by factory inspection to be defective due to faulty material or workman- ship, provided the equipment is returned to our factory prepaid. The period of warr ...

メーカー Speedotron カテゴリー Power Supply

Speedotron D1604のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- D1604の取扱説明書
- Speedotronの製品カード
- パンフレット
- またはSpeedotron D1604の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Speedotron D1604の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Speedotron D1604の取り付け説明書、サービスマニュアル、簡易説明書、またはSpeedotron D1604のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Speedotron D1604の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Speedotron D1604デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSpeedotron D1604を使用するのを助ける技術的文書のことです。説明書は通常、全てのSpeedotron D1604ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Speedotronの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Speedotron D1604の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSpeedotron D1604の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Speedotron D1604に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Speedotron D1604デバイスの基本機能を使うにあたってのヒント。 Speedotron D1604のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Speedotron D1604に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSpeedotron D1604のメーカー/サービスへの連絡先に関する情報。

Speedotron D1604についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSpeedotron D1604の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSpeedotron D1604で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)