JVC HR-XVC17SUの取扱説明書

39ページ 1.39 mb
ダウンロード

ページに移動 of 39

Summary
  • JVC HR-XVC17SU - page 1

    HR-XVC16B U HR-XVC17SU D VD PLA YER & VIDEO CASSETTE RECORDER INSTR UCTIONS LPT1 127-001A EN ...

  • JVC HR-XVC17SU - page 2

    2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert t ...

  • JVC HR-XVC17SU - page 3

    3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. F ...

  • JVC HR-XVC17SU - page 4

    4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbols Used in this Manual . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5 T ypes of Pla yable Discs . . . . . . . . . ...

  • JVC HR-XVC17SU - page 5

    5 To ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an Authorized Service Center . Moisture Condensation Never operate the DVD+VCR immediately after moving it f ...

  • JVC HR-XVC17SU - page 6

    6 T ypes of Play able Discs DVD (8 cm / 12 cm disc) V ideo CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD-R, DVD+R, DVD-RW , DVD+RW , and CD-R / CD-RW that contains audio titles, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD -R, DVD +R, DVD -RW ...

  • JVC HR-XVC17SU - page 7

    7 Regional code This DVD+VCR is designed and manufactured for playback of region “1” encoded DVD software. This unit can play only DVD discs labeled “1” or “ALL”. Notes on Regional Codes • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover . This number must match your DVD+VCR’s regional code or ...

  • JVC HR-XVC17SU - page 8

    8 a Disc T ray (DVD deck) Insert a disc here. b Cassette Compartment (VCR deck) Insert a video cassette here. c PO WER 1/: Switches the DVD+VCR ON and OFF . d REW ( m m ) - D VD: Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track. Press and hold button for about two seconds to search b ...

  • JVC HR-XVC17SU - page 9

    9 Introduction 0-9 Selects numbered options in a menu. bBvV Selects menu options. Fast forwards picture search through 30 seconds of recording. AU X Selects the VCR deck’s source (T uner , LINE 1, or LINE 2). A.MONIT OR Selects an audio language (DVD) or an audio channel (VCD). ANGLE Selects VCR channels. Adjusts manually the tape’s picture on ...

  • JVC HR-XVC17SU - page 10

    10 a ANT .IN Connect the VHF/UHF/CA TV antenna to this terminal. b VCR IN LINE 1 (VIDEO/A UDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , VCR, Camcorder). c D VD/VCR OUT (VIDEO/A UDIO (Left/Right)) Connect to a TV with video and audio inputs. d COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (D VD ...

  • JVC HR-XVC17SU - page 11

    11 Preparation Connecting an Antenna Connecting an Antenna or Cab or Cab le le TV TV a a Antenna : Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT .IN on your DVD+VCR. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenn ...

  • JVC HR-XVC17SU - page 12

    12 RF coaxial connection Connect the RF .OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R) . How to set the D VD+VCR’ s RF output c hannel 1. When the DVD+VCR is turned off, press and hold both CH - and CH + on the front panel for more than five seconds. “RF03” or “RF04” appears in the di ...

  • JVC HR-XVC17SU - page 13

    13 Preparation Connecting to an amplifier equipped with two c hannel digital stereo (PCM) or to an A udio/Video receiver equipped with a multi-c hannel decoder (Dolby Digital™, MPEG 2, or DTS) 1. Connect the DVD+VCR’s DIGIT AL AUDIO OUT jacks (COAXIAL X ) to the corresponding in jack on your amplifier . Use a digital (COAXIAL X ) audio cable. 2 ...

  • JVC HR-XVC17SU - page 14

    14 Initial Settings - Initial Settings - VCR VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Y our DVD+VCR allows Remote Control adjustment of several features. General Operation 1. Press VCR on the Remote Control. 2. Press SETUP MENU and the MAIN menu will appear . 3. Use v / ...

  • JVC HR-XVC17SU - page 15

    15 Preparation TUNING This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CA TV channels 1-125. Au to Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER. Use b / B to switch among TUNER, LINE1, and LINE2. 2. C ...

  • JVC HR-XVC17SU - page 16

    16 Initial Settings - D Initial Settings - D VD VD By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. Y ou can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 19. To display and exit the Menu: Press SETUP MENU to displ ...

  • JVC HR-XVC17SU - page 17

    17 Preparation DISPLA Y TV Aspect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbo x: Displays a wide picture with bands on the upper and lower portions of the screen. P anscan: Automatically displays t ...

  • JVC HR-XVC17SU - page 18

    18 A UDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGIT AL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder . PCM (for Dolb ...

  • JVC HR-XVC17SU - page 19

    19 Preparation O THERS The Auto Play , and B.L.E. settings can be changed. PBC Set Playback Control (PBC) to On or Off. On: V ideo CDs with PBC are played according to the PBC. Off: V ideo CDs with PBC are played the same way as Audio CDs. A uto Play Y ou can set up the DVD+VCR so a DVD disc automatically starts playing whenever the DVD is inserted ...

  • JVC HR-XVC17SU - page 20

    20 This chapter describes how to operate the VCR and DVD. VCR VCR T T ape Pla ape Pla ybac ybac k k Press the VCR button to select the device to be operated. Basic Instructions 1. T urn on the TV . 2. T une the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s ...

  • JVC HR-XVC17SU - page 21

    21 Operation Slow Motion 1. While in still mode, press FF ( M ). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH -/+ on the Remote Control if necessary to adjust the tracking. 3. T o return to the normal speed, press PLA Y ( N ). Notes: • During slow motion, audio is muted and horizontal lines (noise bars) may app ...

  • JVC HR-XVC17SU - page 22

    22 VCR VCR T T ape Recor ape Recor ding ding Basic Instructions 1. T urn on the DVD+VCR and TV . 2. T une the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connec- tion is made between the DVD+VCR and the TV , set the TV’ s source selector to VIDEO. 3. Insert a video cassette with the safety tab intact. 4. Select the des ...

  • JVC HR-XVC17SU - page 23

    23 Operation Channel: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (converter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR. If you use a cable converter , you can program multiple recordings only on the converter box ...

  • JVC HR-XVC17SU - page 24

    24 Instant Timer Recor ding With this feature you can record for a preset length without using the program timer . 1. T urn on DVD+VCR and the TV . 2. Be sure the TV is tuned to the DVD+VCR output channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s source selector to VIDEO. 3. Insert a vid ...

  • JVC HR-XVC17SU - page 25

    25 Operation Copying fr om D VD to VCR Y ou can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray . 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLA Y , FF , REW and P AUSE functions. For best resu ...

  • JVC HR-XVC17SU - page 26

    26 Ad Ad ditional ditional VCR Inf VCR Inf ormation ormation • During manual recording, timer recording, Instant T imer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected. • After you have finished using the DVD+VC ...

  • JVC HR-XVC17SU - page 27

    27 Operation Pla Pla ying a D ying a D VD or VD or Video CD Video CD Playbac k Setup 1. T urn on the TV and select the video input source connected to the DVD+VCR. 2. T urn on the audio system (if applicable) and select the input source connected to the DVD+VCR. 3. Press OPEN/CLOSE ( Z ) to open the disc tray and load your chosen disc in the tray , ...

  • JVC HR-XVC17SU - page 28

    28 Still Picture and Frame-by-Frame Pla yback 1. Press P AUSE ( X ) during playback. Advance the picture frame-by-frame by pressing P AUSE ( X ) repeatedly . 2. T o exit still motion mode, press PLA Y ( N ). Searc h 1. Press REW ( m ) or FF ( M ) during playback. 2. Press REW ( m ) or FF ( M ) repeatedly to select the required speed. DVD: X2, X4, X ...

  • JVC HR-XVC17SU - page 29

    Operation 29 Changing the A udio Channel Press A.MONITOR repeatedly during playback to hear a different audio channel (Stereo, Left, Right). Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player . If you load a disc ...

  • JVC HR-XVC17SU - page 30

    30 On-Screen Displa On-Screen Displa y - D y - D VD VD Y ou can display the general playback status on the TV screen. Some items can be changed using the menu. T o use the on-screen display: 1. Press DISPLA Y during playback. 2. Press v / V to select an item. The selected item is highlighted. 3. Press b / B to change the setting. Y ou can also use ...

  • JVC HR-XVC17SU - page 31

    31 Operation Pla Pla ying an A ying an A udio CD or MP3 udio CD or MP3 Disc Disc A udio CD Once you insert an Audio CD a menu appears on the TV screen. Press v / V to select a track then press PLA Y ( N ) or ENTER / OK and playback starts. MP3 1. Press v / V to select a folder, and press ENTER to see the folder contents. 2. Press v / V to select a ...

  • JVC HR-XVC17SU - page 32

    32 Searc h 1. Press REW ( m ) or FF ( M ) during playback. 2. Press REW ( m ) or FF ( M ) repeatedly to select the required speed: X2, X4 and X8 backward or forward. 3. T o exit SEARCH mode, press PLA Y ( N ). Random 1. Press RANDOM during playback. Random Playback begins immediately and “Random” appears on the menu screen. 2. T o return to nor ...

  • JVC HR-XVC17SU - page 33

    33 Operation Repeat Programmed T racks 1. Press REPEA T when playing a disc. The repeat icon appears. 2. Press REPEA T to select a desired repeat mode. • T rack: repeats the current track • All: repeats all the tracks on programmed list. • Off(No display): does not play repeatedly . Note: If you press SKIP ( > ) once during Repeat Track pl ...

  • JVC HR-XVC17SU - page 34

    34 Vie Vie wing a JPEG Disc wing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER / OK. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, u ...

  • JVC HR-XVC17SU - page 35

    35 Reference Reference Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Brit ...

  • JVC HR-XVC17SU - page 36

    36 T T r r oub oub leshooting leshooting Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The “PROGRESSIVE SCAN MODE” message remains to be displayed. Cause  The power cord is disconnected.  DVD or VCR button is not switched properly .  No disc is inserted.  No t ...

  • JVC HR-XVC17SU - page 37

    37 Reference Symptom The DVD+VCR does not start playback. V ideo tape cannot be inserted. No Hi-Fi sound The Remote Control does not work properly . Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. T imer recording is not possible. Cause  An unplayable disc is inserted.  The disc is placed upsid ...

  • JVC HR-XVC17SU - page 38

    38 General Power requirements 120 V , 60 Hz Power consumption 16 W (POWER ON) 0.8 W (ST ANDBY mode) Dimensions (approx.) 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) W eight (approx.) 9.24 lbs (4.2 k g ) Operating temperature 5˚C to 40˚C (41˚F to 104˚F) Operating humidity 5 % to 90 % Signal system NTSC Inputs ANTENNA IN ...

  • JVC HR-XVC17SU - page 39

    UC Printed in Indonesia 0206MNH-LG-LG HR-XVC16BU/HR-XVC17SU P/NO : 3834RV0042F ...

メーカー JVC カテゴリー DVD Player

JVC HR-XVC17SUのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HR-XVC17SUの取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC HR-XVC17SUの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC HR-XVC17SUの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC HR-XVC17SUの取り付け説明書、サービスマニュアル、簡易説明書、またはJVC HR-XVC17SUのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC HR-XVC17SUの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC HR-XVC17SUデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC HR-XVC17SUを使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC HR-XVC17SUユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC HR-XVC17SUの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC HR-XVC17SUの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC HR-XVC17SUに関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC HR-XVC17SUデバイスの基本機能を使うにあたってのヒント。 JVC HR-XVC17SUのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC HR-XVC17SUに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC HR-XVC17SUのメーカー/サービスへの連絡先に関する情報。

JVC HR-XVC17SUについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC HR-XVC17SUの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC HR-XVC17SUで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)